libertys on there arse

[gtspec]

testing out the new attachment feature.. heres the car on the lowest coilover setting without touching the spring rate

[smythie]

You can't adjust spring rate of the coilovers without putting different springs in it. You might be able to adjust preload though (which will also affect ride height) but your spring rate will remain the same

[niicksey]

thats dope

[smythie]

yeah, pretty silly having the car that low

[tangcla]

I think it looks stupid with the rear that low... but that's just my opinion.

[niicksey]

true.. hahaha i dont know whats wrong with me.. but i love it

[Jimmy S]

Looks great, but the back needs to be at the same height as the front!...

Needs to look balanced imo...

[sheppo9]

Did you just cut the bump stops or take them out to get that low?

But as someone said, needs to be the same height front and rear - so wind the front down more...

[Fangin_RX]

Wind the front down and kiss your font bumper goodbye...

[gtspec]

the car is well balanced in respect to the clearance from the ground on the front n back i think its just the angle..
if i was to lower the front more the clearance at the front to the ground would be uneven when compared to the rear..

anyhow i have since raised it a little as i couldnt get over any speed bumps... it was more a trial to see how low i can go

the bump stops were not cut.. just coilovers adjusted to the lowest point

[niicksey]

looks pretty even to me. just because the rear is in the gaurd and the front isnt,

looks good anywho dude

[Jimmy S]

ok... to clarify, I mean the car needs to "look" or "appear" balanced! As in the gap to the guards should be the same IMO...

[gtspec]

ok... to clarify, I mean the car needs to "look" or "appear" balanced! As in the gap to the guards should be the same IMO...

well theres a catch 22 with that.. if i made the gap between the guards even then the ground clearance would be uneven..

looks pretty even to me. just because the rear is in the gaurd and the front isnt,
looks good anywho dude

thanks for the kind words Niicksey

[niicksey]

no worries dude

[541NTT]

ok... to clarify, I mean the car needs to "look" or "appear" balanced! As in the gap to the guards should be the same IMO...

well theres a catch 22 with that.. if i made the gap between the guards even then the ground clearance would be uneven..

looks pretty even to me. just because the rear is in the gaurd and the front isnt,
looks good anywho dude

thanks for the kind words Niicksey

MOOAAAARRR PICS!!!!!