3.0R-B Vibration at 2500 rpm

Posts specific to the 3.0 litre NA H6 engine

Re: 3.0R-B Vibration at 2500 rpm

Postby Deep Heat » Mon Mar 24, 2014 10:35 pm

Your car thinks it's a sextoy.
Jack_Keaka wrote: I like my women like subarus, box explodes and does a head easily.
Deep Heat
formerly Twinkle
 
Posts: 1403
Joined: Mon Sep 09, 2013 10:01 pm
Location: Kellyville, NSW

Re: 3.0R-B Vibration at 2500 rpm

Postby Blake8828 » Tue Mar 25, 2014 12:04 pm

Haha Well yes, Raptor headers would be nice, until my insurance company increases my premium by $500 :wink:

Unfortunately the only thing that didn't vibrate was the seat and my car seems to bring me nothing but displeasure
and an empty wallet, more like my girlfriend than a sex toy :lol:
Blake8828
 
Posts: 74
Joined: Tue Oct 15, 2013 6:28 pm
Location: Ballarat, Victoria
Car: Liberty 3.0R-B
Real name: Blake

Re: 3.0R-B Vibration at 2500 rpm

Postby Scratchy » Mon Apr 07, 2014 3:34 pm

Similar sort of thing is happening to my 3.0 Spec B. Around 1.9k revs I get a really tinny hi frequency tractor noise under light load (doesnt happen stationary). Its annoying and quite loud, sounds as if its coming from directly under me but after tapping with a hammer I couldnt find anything... Do you think this could be the header heat shields too?
User avatar
Scratchy
 
Posts: 95
Joined: Wed Feb 13, 2013 9:58 pm
Location: Perth WA
Car: 06 H6 Sedan
Real name: Rich

Re: 3.0R-B Vibration at 2500 rpm

Postby Blake8828 » Mon Apr 07, 2014 10:06 pm

Good chance it is. If you have a set of car ramps taking the heat shields off is quite easy, worth a try!

This however hasn't fixed my problem, there is still something happening at those revs making the engine run rough,
just a lot quieter now that its not resonating with the heat shields.

Hopefully your issue is just the heat shield touching the exhaust pipe.
Blake8828
 
Posts: 74
Joined: Tue Oct 15, 2013 6:28 pm
Location: Ballarat, Victoria
Car: Liberty 3.0R-B
Real name: Blake

Re: 3.0R-B Vibration at 2500 rpm

Postby Scratchy » Tue Apr 08, 2014 1:39 pm

Oh so yours changes the feel of the car too? As far as i know mine is just the noise no loss of performance, its still under the used car warranty so hopefully I'll get them to sort it out
User avatar
Scratchy
 
Posts: 95
Joined: Wed Feb 13, 2013 9:58 pm
Location: Perth WA
Car: 06 H6 Sedan
Real name: Rich

Re: 3.0R-B Vibration at 2500 rpm

Postby Blake8828 » Tue Apr 08, 2014 6:17 pm

Nice, best to let them figure it out ;)
Blake8828
 
Posts: 74
Joined: Tue Oct 15, 2013 6:28 pm
Location: Ballarat, Victoria
Car: Liberty 3.0R-B
Real name: Blake

Re: 3.0R-B Vibration at 2500 rpm

Postby Blake8828 » Mon Jun 02, 2014 6:04 pm

Okay, just an update in case someone is having a similar issue.

I got a little over excited about the heat shields, the vibration came back after going for longer drives.

I replaced the transmission mount today and the vibration has gone, went for a very long test drive and it seems to be fixed for good!

The rubber was ripping away from the steel in a few parts and the whole thing was quite squashed compared to the replacement.

This also fixed a another noise that I suspected to be a input shaft bearing on its way out.

$50 for the mount and half an hour to swap it over (quite an easy DIY) is a cheap starting point for anyone else with a car making these kinds of noises and vibrations.
Blake8828
 
Posts: 74
Joined: Tue Oct 15, 2013 6:28 pm
Location: Ballarat, Victoria
Car: Liberty 3.0R-B
Real name: Blake

Previous

Return to 3.0R & 3.6R engine specific

Who is online

Users browsing this forum: No registered users and 1 guest