MY04 Liberty GT - FrankenStien - EOI welcome / FS

[<GB>]

Is your evc in the cubby hole? Pitty there isn't more places that u can hide gauges that look standard

[Kekotic]

Is your evc in the cubby hole? Pitty there isn't more places that u can hide gauges that look standard

in car PC install in the cubby and get all the gauges you need! Probably cheaper than buying 2-3+ gauges too.

[dr20t]

Have my defi oil pressure and boost gauges in the cubby

Hks evc in the glovebox, along with the defi control module and the hks ezy writer data box and serial cable

Alot going on

I can always return the vent back to stock and get a leather bound gauge pod but I didn't want to stick a pod on top of the dash pad...

[bigBADbenny]

So much awesome!!!
There are finned gauge rings available that might work too...
e.g. http://tinyurl.com/d62g3js (thats a bit tiny but you get the idea lol)

[dawesy]

Wheels look awesome mate suit the silver well
Drooling over those sexy gauges

[dr20t]

So much awesome!!!
There are finned gauge rings available that might work too...
e.g. http://tinyurl.com/d62g3js (thats a bit tiny but you get the idea lol)

Thanks Benny that's a nice suggestion - might look around to see if there are larger ones

Dawesy cheers yeah I was a little concerned about the titanium gold vs the silver but I think it turned out alrigh

Rear is scrubbing slightly even after I raised the back end 12mm

Guard rolling or more camber here we come

[bosc0]

Maybe we can all chip in so you can replace those ugly mats

[bigBADbenny]

Here's what I did to fix the scrubbing issues at the rear

[dr20t]

Maybe we can all chip in so you can replace those ugly mats

Haha
They're the shitty Matts in there while its at the shop

I have my Subaru plush carpet ones at home

[senator]

Guard rolling or more camber here we come

Make use of those Ikyea camber arms son!!!!

[Boostaddict]

Mick...... Horn bag !! Love it!!!

Those rims.... Spot on for a sexy stock sti officer.

And that Plazzie intercooler.... Yum yum!!!

[alessandro132]

Mick, any updates?

[dr20t]

Nothing yet guys

Waiting on finalisation of the cooler piping and a few little things by mick

Then hopefully Scott can find time to tune it shortly thereafter

[dr20t]

Almost there - im told mid next week hopefully

in the meantime added more goodies to my little frankenstien

- Cusco underbody power braces A, B, C, D, E
- Cusco Front power brace (crossmember brace)
- Cusco rear strut brace
- Sti manual gear knob
- Manual leather gear boot and surround (from the facelifted GT)
- Whiteline front strut tops with adjustable camber bolt for the KW Variant 2's that will be installed soon.
- Rear quarters pumped out to clear new rims (by me - surprised with how good it actually turned out to be honest - no damage or ripples)
- 9k facelift cluster purchased (needs to be recoded to suit ECU \ BIU which will happen after the tune)
- Killer B Oil Pickup

Thats all for now. List is slowly growing (and i keep lying to myself about mods stopping )

Mick

[jslayz]

Almost there - im told mid next week hopefully

in the meantime added more goodies to my little frankenstien

- Cusco underbody power braces A, B, C, D, E
- Cusco Front power brace (crossmember brace)
- Cusco rear strut brace
- Sti manual gear knob
- Manual leather gear boot and surround (from the facelifted GT)
- Whiteline front strut tops with adjustable camber bolt for the KW Variant 2's that will be installed soon.
- Rear quarters pumped out to clear new rims (by me - surprised with how good it actually turned out to be honest - no damage or ripples)
- 9k facelift cluster purchased (needs to be recoded to suit ECU \ BIU which will happen after the tune)
- Killer B Oil Pickup

Thats all for now. List is slowly growing (and i keep lying to myself about mods stopping )

Mick

Go Mick!
Very interested to hear what you think about the cusco bracing system and its benefits or otherwise.
Mmmmm KW V2's nice choice.

Keen to hear how you go with your front mount and turbo setup too

Good luck,

J