Springs, shock absorbers, swaybars,
Brakes, Wheels and Tyres
by dja » Sun Feb 17, 2013 5:27 pm
Hi guys, been searching for the past few hours and i just cant find a definate answer.
Looking at Rota Grid 19*8.5 or 9.5 +32/38
I want to know 2 things:
*Do these clear brembo's?
*is 9.5 too wide for clearance(would run 275 tyres)
Thanks for any help guys
-

dja
-
- Posts: 375
- Joined: Tue Aug 28, 2007 2:43 pm
- Location: Wollongong NSW
- Car: Many
- Real name: Dan
- Profile URL: viewtopic.php?f=10&t=22837
by zch91 » Sun Feb 17, 2013 5:59 pm
At that offset, I would assume it would clear Brembos, depending on the spoke design.
That width + offset will make it a pretty snug/tight fit.. Depending on your ride height/camber etc.. I imagine at 0 camber you will have quite a bit of poke.
-

zch91
- -stickered-
-
- Posts: 2665
- Joined: Sat Dec 24, 2011 11:12 am
- Location: Darwin, NT
- Car: MY04 GT Premium - Silver 5EAT
- Real name: Zach
- Profile URL: viewtopic.php?f=10&t=15397
by cruisn » Mon Feb 18, 2013 5:05 pm
Both specs will clear Brembo's.
You will "just" get away with 8.5 +32 but will need some decent negative camber front and rear.
You will be struggling to not scrub with 235's on that.
9.5 and a 275 just isn't possible to get under the guards.
I fit some 8.5 +35 with 225 and coilovers last week for someone. Rolled rear guards also and still scrubbed on big bumps.
-

cruisn
-
- Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Return to Suspension, Brakes, Wheels and Tyres.
Who is online
Users browsing this forum: No registered users and 27 guests