19inch fitment

Springs, shock absorbers, swaybars,
Brakes, Wheels and Tyres

19inch fitment

Postby dja » Sun Feb 17, 2013 5:27 pm

Hi guys, been searching for the past few hours and i just cant find a definate answer.

Looking at Rota Grid 19*8.5 or 9.5 +32/38

I want to know 2 things:
*Do these clear brembo's?
*is 9.5 too wide for clearance(would run 275 tyres)

Thanks for any help guys
User avatar
dja
 
Posts: 375
Joined: Tue Aug 28, 2007 2:43 pm
Location: Wollongong NSW
Car: Many
Real name: Dan
Profile URL: viewtopic.php?f=10&t=22837

Re: 19inch fitment

Postby zch91 » Sun Feb 17, 2013 5:59 pm

At that offset, I would assume it would clear Brembos, depending on the spoke design.

That width + offset will make it a pretty snug/tight fit.. Depending on your ride height/camber etc.. I imagine at 0 camber you will have quite a bit of poke.
User avatar
zch91
-stickered-
 
Posts: 2665
Joined: Sat Dec 24, 2011 11:12 am
Location: Darwin, NT
Car: MY04 GT Premium - Silver 5EAT
Real name: Zach
Profile URL: viewtopic.php?f=10&t=15397

Re: 19inch fitment

Postby cruisn » Mon Feb 18, 2013 5:05 pm

Both specs will clear Brembo's.

You will "just" get away with 8.5 +32 but will need some decent negative camber front and rear.

You will be struggling to not scrub with 235's on that.

9.5 and a 275 just isn't possible to get under the guards.

I fit some 8.5 +35 with 225 and coilovers last week for someone. Rolled rear guards also and still scrubbed on big bumps.
User avatar
cruisn
 
Posts: 6560
Joined: Tue Nov 03, 2009 8:09 pm
Location: Melbourne
Car: MY02 GTB E Tune
Real name: Mark


Return to Suspension, Brakes, Wheels and Tyres.

Who is online

Users browsing this forum: No registered users and 26 guests