Australian Liberty Owners Club

Skip to content

Member Profile - AB501UT!0N

Show off what mods you've done to your car.
Post a reply

Re: Member Profile - AB501UT!0N

Postby Zaccy182 » Mon Oct 15, 2012 11:05 pm

AB501UT!0N wrote:I also have my major serviced booked in this wednesday and the rear rotors are going on at the same time, good by 2k :lol:


Sounds about right... When I got my car it was due for the 200,000 big one. All up it was just over $2,200 I needed items for roadworthy (lower control arms I think) and they changed a split cv boot along with all genuine parts (I dont take it to subaru though)
[ 05 Liberty GT 5MT Wagon ]
240,000kms -mostly stock- going strong
Tune by Matt from KiDo | COBB short shifter + kartboy bushings | Whiteline sway bars | GFB respons BOV | K&N panel filter | eBay 3" cat-back to 2.5" Y pipe exhaust | 8000k HIDs | Lenso 17" Project D Spec B wheels
User avatar
Zaccy182
 
Posts: 306
Joined: Tue Jul 17, 2012 4:55 pm
Location: Canberra
Car: 05 GT Wagon
Real name: Zac
Profile URL: viewtopic.php?f=10&t=18204
Top

Re: Member Profile - AB501UT!0N

Postby AB501UT!0N » Tue Oct 16, 2012 12:25 pm

Zaccy182 wrote:
AB501UT!0N wrote:I also have my major serviced booked in this wednesday and the rear rotors are going on at the same time, good by 2k :lol:


Sounds about right... When I got my car it was due for the 200,000 big one. All up it was just over $2,200 I needed items for roadworthy (lower control arms I think) and they changed a split cv boot along with all genuine parts (I dont take it to subaru though)


Ouch! 2.2k sure is alot but at least I will only have to do it once on the car so I should not complain to much :P and same here I get all genuine subaru parts or better performing parts :D
jakey wrote:.... goshgollywingwong


Jack_Keaka wrote:the process of chris getting his parts as follows: :yahoo: :mrgreen: :? :close_tema: :shock: :( :cry: :angry2: :skull:
User avatar
AB501UT!0N
 
Posts: 1315
Joined: Fri Sep 09, 2011 9:58 am
Location: Kyneton
Car: Subaru Liberty Heritage 2000
Real name: Chris
Top

Re: Member Profile - AB501UT!0N

Postby Jack_Keaka » Tue Oct 16, 2012 12:48 pm

I just get better stuff and do 60% of the service myself. Belts, alignment, tyres I leave to them. Fluids, filters, brakes ect I do myself
Apparently i've never been on live television before
User avatar
Jack_Keaka
 
Posts: 3348
Joined: Wed Mar 23, 2011 1:39 am
Location: Antarctica
Car: 21 Forester
Real name: Jack
Profile URL: viewtopic.php?f=10&t=18091
Top

Re: Member Profile - AB501UT!0N

Postby AB501UT!0N » Tue Oct 16, 2012 12:55 pm

Jack_Keaka wrote:I just get better stuff and do 60% of the service myself. Belts, alignment, tyres I leave to them. Fluids, filters, brakes ect I do myself


That's awesome that you can do it yourself and If I had the time I would like to learn but I don't know about you but for me there is never time :cry:
jakey wrote:.... goshgollywingwong


Jack_Keaka wrote:the process of chris getting his parts as follows: :yahoo: :mrgreen: :? :close_tema: :shock: :( :cry: :angry2: :skull:
User avatar
AB501UT!0N
 
Posts: 1315
Joined: Fri Sep 09, 2011 9:58 am
Location: Kyneton
Car: Subaru Liberty Heritage 2000
Real name: Chris
Top

Re: Member Profile - AB501UT!0N

Postby Jack_Keaka » Tue Oct 16, 2012 2:06 pm

Oh I rarely have the time and the space is a but frustrating in my new house but I book myself in like I'd book in for a service to make sure I do it. The only times I get the mechanic to to stuff I can do is when I'm feeling lazy...
I just like to save myself a bit of money... To buy more things for the car! :lol:
Apparently i've never been on live television before
User avatar
Jack_Keaka
 
Posts: 3348
Joined: Wed Mar 23, 2011 1:39 am
Location: Antarctica
Car: 21 Forester
Real name: Jack
Profile URL: viewtopic.php?f=10&t=18091
Top

Re: Member Profile - AB501UT!0N

Postby AB501UT!0N » Tue Oct 16, 2012 10:22 pm

Jack_Keaka wrote:Oh I rarely have the time and the space is a but frustrating in my new house but I book myself in like I'd book in for a service to make sure I do it. The only times I get the mechanic to to stuff I can do is when I'm feeling lazy...
I just like to save myself a bit of money... To buy more things for the car! :lol:


New house hey very nice indeed :D and Haha same here so I work overtime when I get my service done lol and guess who got there plates today!

Going to try and get them put on on Thursday :mrgreen:
jakey wrote:.... goshgollywingwong


Jack_Keaka wrote:the process of chris getting his parts as follows: :yahoo: :mrgreen: :? :close_tema: :shock: :( :cry: :angry2: :skull:
User avatar
AB501UT!0N
 
Posts: 1315
Joined: Fri Sep 09, 2011 9:58 am
Location: Kyneton
Car: Subaru Liberty Heritage 2000
Real name: Chris
Top

Re: Member Profile - AB501UT!0N

Postby AB501UT!0N » Wed Oct 17, 2012 8:22 pm

My New Plates :D

Image

New Rear Rotors

Image

I had the major service today and it came to 1625 which was not too bad :)

Butttt the new one off rotors from DBA do not fit cause they are vented 266mm and my current ones are 244mm solid rotors :cry:

So I need new calipers for the rear and I need them quickly! Any help guys?
jakey wrote:.... goshgollywingwong


Jack_Keaka wrote:the process of chris getting his parts as follows: :yahoo: :mrgreen: :? :close_tema: :shock: :( :cry: :angry2: :skull:
User avatar
AB501UT!0N
 
Posts: 1315
Joined: Fri Sep 09, 2011 9:58 am
Location: Kyneton
Car: Subaru Liberty Heritage 2000
Real name: Chris
Top

Re: Member Profile - AB501UT!0N

Postby Jack_Keaka » Wed Oct 17, 2012 8:29 pm

very nice Chris! :D plates are uber cool.
B4 brake callipers should fit them.
Apparently i've never been on live television before
User avatar
Jack_Keaka
 
Posts: 3348
Joined: Wed Mar 23, 2011 1:39 am
Location: Antarctica
Car: 21 Forester
Real name: Jack
Profile URL: viewtopic.php?f=10&t=18091
Top

Re: Member Profile - AB501UT!0N

Postby AB501UT!0N » Wed Oct 17, 2012 8:49 pm

Jack_Keaka wrote:very nice Chris! :D plates are uber cool.
B4 brake callipers should fit them.


Thanks Jack I think so too :)

and thats a great idea but where do I get them?
jakey wrote:.... goshgollywingwong


Jack_Keaka wrote:the process of chris getting his parts as follows: :yahoo: :mrgreen: :? :close_tema: :shock: :( :cry: :angry2: :skull:
User avatar
AB501UT!0N
 
Posts: 1315
Joined: Fri Sep 09, 2011 9:58 am
Location: Kyneton
Car: Subaru Liberty Heritage 2000
Real name: Chris
Top

Re: Member Profile - AB501UT!0N

Postby Jack_Keaka » Wed Oct 17, 2012 8:58 pm

AB501UT!0N wrote:
Jack_Keaka wrote:very nice Chris! :D plates are uber cool.
B4 brake callipers should fit them.


Thanks Jack I think so too :)

and thats a great idea but where do I get them?


next time you see one just steal the brakes :)
Import Monster, Japan Parts, SubyClub... ill have a look around
Apparently i've never been on live television before
User avatar
Jack_Keaka
 
Posts: 3348
Joined: Wed Mar 23, 2011 1:39 am
Location: Antarctica
Car: 21 Forester
Real name: Jack
Profile URL: viewtopic.php?f=10&t=18091
Top

Re: Member Profile - AB501UT!0N

Postby AB501UT!0N » Wed Oct 17, 2012 10:17 pm

Jack_Keaka wrote:
AB501UT!0N wrote:
Jack_Keaka wrote:very nice Chris! :D plates are uber cool.
B4 brake callipers should fit them.


Thanks Jack I think so too :)

and thats a great idea but where do I get them?


next time you see one just steal the brakes :)
Import Monster, Japan Parts, SubyClub... ill have a look around


Hahaha be careful B4 owners I coming for you :mrgreen: Thanks Jack that would be awesome !
jakey wrote:.... goshgollywingwong


Jack_Keaka wrote:the process of chris getting his parts as follows: :yahoo: :mrgreen: :? :close_tema: :shock: :( :cry: :angry2: :skull:
User avatar
AB501UT!0N
 
Posts: 1315
Joined: Fri Sep 09, 2011 9:58 am
Location: Kyneton
Car: Subaru Liberty Heritage 2000
Real name: Chris
Top

Re: Member Profile - AB501UT!0N

Postby SH30RB » Sun Oct 21, 2012 2:53 pm

Chris, sort that 'STANCEWORKS' sticker out!
I just saw a pic of your car and its on an angle...

Not cool!
TEAM FUNERAL HEARSE!
Only slightly modified, I swear!
User avatar
SH30RB
-stickered-
 
Posts: 4024
Joined: Sun Aug 07, 2011 8:32 pm
Location: Sydney
Car: 05 Liberty 3.0R-B wagon
Real name: Simon
Profile URL: viewtopic.php?f=10&t=14766
Top

Re: Member Profile - AB501UT!0N

Postby AB501UT!0N » Mon Oct 22, 2012 11:07 pm

SH30RB wrote:Chris, sort that 'STANCEWORKS' sticker out!
I just saw a pic of your car and its on an angle...

Not cool!


Sorry Simon! I made the mistake of putting it on in the dark lol
Going to fix it promise :mrgreen:

Lilydale Cruise

Image

Image

Image

Image

Do you guys think the plates suit?
jakey wrote:.... goshgollywingwong


Jack_Keaka wrote:the process of chris getting his parts as follows: :yahoo: :mrgreen: :? :close_tema: :shock: :( :cry: :angry2: :skull:
User avatar
AB501UT!0N
 
Posts: 1315
Joined: Fri Sep 09, 2011 9:58 am
Location: Kyneton
Car: Subaru Liberty Heritage 2000
Real name: Chris
Top

Re: Member Profile - AB501UT!0N

Postby cruisn » Mon Oct 22, 2012 11:11 pm

Who's Yvette?

Love those wheels.... :good:
User avatar
cruisn
 
Posts: 6560
Joined: Tue Nov 03, 2009 8:09 pm
Location: Melbourne
Car: MY02 GTB E Tune
Real name: Mark
Top

Re: Member Profile - AB501UT!0N

Postby Jack_Keaka » Tue Oct 23, 2012 7:39 am

cruisn wrote:Who's Yvette?

Love those wheels.... :good:


Scroll back a page or two

Also mark, are you able to confirm that B4 rear brakes will fit over a 266mm disk?
Apparently i've never been on live television before
User avatar
Jack_Keaka
 
Posts: 3348
Joined: Wed Mar 23, 2011 1:39 am
Location: Antarctica
Car: 21 Forester
Real name: Jack
Profile URL: viewtopic.php?f=10&t=18091
Top
PreviousNext
Post a reply

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 15 guests

Powered by phpBB® Forum Software © phpBB Group