Hey guys, was wondering if there was a walkthrough already in the forums, or if you knew the easiest way to replace the number plate lights on a sedan?
Is it just to remove the black fabric trimmings? Or is it prying at the plastic with a flat head screwdriver?
Thanks guys
Australian Liberty Owners Club
Replacing rear number plate light globes - Gen 4 sedan
9 posts
• Page 1 of 1
Replacing rear number plate light globes - Gen 4 sedan
by d-chang » Sat Jul 28, 2012 5:49 pm
Below car has been gone for quite some time now... blew bottom end bearing and dealership screwed me! Now driving 2008 WRX with ~65k kms on the clock. Only has cat back exhaust and tune by KiDo at the moment! More to come... but slowly!
Purchased recently (12/11/2013), already with: Stage 2 Pedders lowered springs, rear Whiteline sway bar, Advan Racing TCII 18x8 wheels, k&N pod filter, custom 3" exhaust system from turbo back with Magnaflow mufflers. ECUTEK tune of some sort (hopefully soon to be fixed)..... now FIXED!! Now KiDo Tuned!
Added: HID kit, EZ lip equivalents to the front and sides, and various LED treatments, oem boot spoiler, [LGT WRC] plates, GFB Respons BOV for extra Pssscchhh! --> Gone... I couldn't afford it's heart transplant... but keep a look out, as it will come back on sale soon!
Purchased recently (12/11/2013), already with: Stage 2 Pedders lowered springs, rear Whiteline sway bar, Advan Racing TCII 18x8 wheels, k&N pod filter, custom 3" exhaust system from turbo back with Magnaflow mufflers. ECUTEK tune of some sort (hopefully soon to be fixed)..... now FIXED!! Now KiDo Tuned!
Added: HID kit, EZ lip equivalents to the front and sides, and various LED treatments, oem boot spoiler, [LGT WRC] plates, GFB Respons BOV for extra Pssscchhh! --> Gone... I couldn't afford it's heart transplant... but keep a look out, as it will come back on sale soon!
-
d-chang - -stickered-
- Posts: 636
- Joined: Tue Feb 21, 2012 6:29 pm
- Location: Perth, Western Australia
- Car: MY05 Liberty GT
- Real name: Daniel
- Profile URL: viewtopic.php?f=7&t=15749
Re: Replacing rear number plate light globes - Gen 4 sedan
by iisshhyy » Sat Jul 28, 2012 5:51 pm
Have to remove the carpet trim on the boot lid, then you will see the holes where you have to fiddle around to replace the globes.
- iisshhyy
- Posts: 426
- Joined: Wed Mar 16, 2011 10:13 pm
Re: Replacing rear number plate light globes - Gen 4 sedan
by Dropz » Sat Jul 28, 2012 6:03 pm
Remove the trim, it's like 14 clips and the 2 rubber stops. Then the globe holders screw in a bit (like 1/4 turn) they are small wedge globes.
Built not bought, it's a way of life.
-
Dropz - Posts: 1710
- Joined: Tue Apr 26, 2011 9:50 pm
- Location: Adelaide
- Real name: Karl
- Profile URL: viewtopic.php?f=10&t=17921
Re: Replacing rear number plate light globes - Gen 4 sedan
by d-chang » Sat Jul 28, 2012 6:18 pm
Awesome! Thanks guys! I will see into it tomorrow! 
Below car has been gone for quite some time now... blew bottom end bearing and dealership screwed me! Now driving 2008 WRX with ~65k kms on the clock. Only has cat back exhaust and tune by KiDo at the moment! More to come... but slowly!
Purchased recently (12/11/2013), already with: Stage 2 Pedders lowered springs, rear Whiteline sway bar, Advan Racing TCII 18x8 wheels, k&N pod filter, custom 3" exhaust system from turbo back with Magnaflow mufflers. ECUTEK tune of some sort (hopefully soon to be fixed)..... now FIXED!! Now KiDo Tuned!
Added: HID kit, EZ lip equivalents to the front and sides, and various LED treatments, oem boot spoiler, [LGT WRC] plates, GFB Respons BOV for extra Pssscchhh! --> Gone... I couldn't afford it's heart transplant... but keep a look out, as it will come back on sale soon!
Purchased recently (12/11/2013), already with: Stage 2 Pedders lowered springs, rear Whiteline sway bar, Advan Racing TCII 18x8 wheels, k&N pod filter, custom 3" exhaust system from turbo back with Magnaflow mufflers. ECUTEK tune of some sort (hopefully soon to be fixed)..... now FIXED!! Now KiDo Tuned!
Added: HID kit, EZ lip equivalents to the front and sides, and various LED treatments, oem boot spoiler, [LGT WRC] plates, GFB Respons BOV for extra Pssscchhh! --> Gone... I couldn't afford it's heart transplant... but keep a look out, as it will come back on sale soon!
-
d-chang - -stickered-
- Posts: 636
- Joined: Tue Feb 21, 2012 6:29 pm
- Location: Perth, Western Australia
- Car: MY05 Liberty GT
- Real name: Daniel
- Profile URL: viewtopic.php?f=7&t=15749
Re: Replacing rear number plate light globes - Gen 4 sedan
by Dropz » Sat Jul 28, 2012 6:24 pm
Wouldn't you do it before dark, not after? Hehe.
Built not bought, it's a way of life.
-
Dropz - Posts: 1710
- Joined: Tue Apr 26, 2011 9:50 pm
- Location: Adelaide
- Real name: Karl
- Profile URL: viewtopic.php?f=10&t=17921
Re: Replacing rear number plate light globes - Gen 4 sedan
by d-chang » Sat Jul 28, 2012 6:34 pm
Dropz wrote:Wouldn't you do it before dark, not after? Hehe.
Hahaha... hence why I will face that problem tomorrow... not to mention... I CBF right now!
Below car has been gone for quite some time now... blew bottom end bearing and dealership screwed me! Now driving 2008 WRX with ~65k kms on the clock. Only has cat back exhaust and tune by KiDo at the moment! More to come... but slowly!
Purchased recently (12/11/2013), already with: Stage 2 Pedders lowered springs, rear Whiteline sway bar, Advan Racing TCII 18x8 wheels, k&N pod filter, custom 3" exhaust system from turbo back with Magnaflow mufflers. ECUTEK tune of some sort (hopefully soon to be fixed)..... now FIXED!! Now KiDo Tuned!
Added: HID kit, EZ lip equivalents to the front and sides, and various LED treatments, oem boot spoiler, [LGT WRC] plates, GFB Respons BOV for extra Pssscchhh! --> Gone... I couldn't afford it's heart transplant... but keep a look out, as it will come back on sale soon!
Purchased recently (12/11/2013), already with: Stage 2 Pedders lowered springs, rear Whiteline sway bar, Advan Racing TCII 18x8 wheels, k&N pod filter, custom 3" exhaust system from turbo back with Magnaflow mufflers. ECUTEK tune of some sort (hopefully soon to be fixed)..... now FIXED!! Now KiDo Tuned!
Added: HID kit, EZ lip equivalents to the front and sides, and various LED treatments, oem boot spoiler, [LGT WRC] plates, GFB Respons BOV for extra Pssscchhh! --> Gone... I couldn't afford it's heart transplant... but keep a look out, as it will come back on sale soon!
-
d-chang - -stickered-
- Posts: 636
- Joined: Tue Feb 21, 2012 6:29 pm
- Location: Perth, Western Australia
- Car: MY05 Liberty GT
- Real name: Daniel
- Profile URL: viewtopic.php?f=7&t=15749
Re: Replacing rear number plate light globes - Gen 4 sedan
by Kekotic » Sat Jul 28, 2012 6:41 pm
I use curved needle nose pliers to get those clips out, makes it a lot easier.
http://i.imgur.com/UgRUe.jpg
http://i.imgur.com/UgRUe.jpg
-
Kekotic - -stickered-
- Posts: 6452
- Joined: Tue Jun 08, 2010 6:46 pm
- Car: MY07 Liberty GT Spec.B
- Profile URL: viewtopic.php?f=10&t=13066
Re: Replacing rear number plate light globes - Gen 4 sedan
by Dropz » Sat Jul 28, 2012 9:12 pm
I use a clip tool, or bend the tip of a flat blade screw driver.
Built not bought, it's a way of life.
-
Dropz - Posts: 1710
- Joined: Tue Apr 26, 2011 9:50 pm
- Location: Adelaide
- Real name: Karl
- Profile URL: viewtopic.php?f=10&t=17921
Re: Replacing rear number plate light globes - Gen 4 sedan
by d-chang » Sat Jul 28, 2012 10:04 pm
It was surprisingly easy to get in there... A little bit skeptic at first, I just used my hands and a bit of brute strength... luckily for me the clips didn't break and the trim didn't tear! WIN!! Whole job just took me about 5 minutes... Now time to shop for some LED lighting! Probably go to Jaycar.
Whole job just took me about 5 minutes... Now time to shop for some LED lighting! Probably go to Jaycar.Below car has been gone for quite some time now... blew bottom end bearing and dealership screwed me! Now driving 2008 WRX with ~65k kms on the clock. Only has cat back exhaust and tune by KiDo at the moment! More to come... but slowly!
Purchased recently (12/11/2013), already with: Stage 2 Pedders lowered springs, rear Whiteline sway bar, Advan Racing TCII 18x8 wheels, k&N pod filter, custom 3" exhaust system from turbo back with Magnaflow mufflers. ECUTEK tune of some sort (hopefully soon to be fixed)..... now FIXED!! Now KiDo Tuned!
Added: HID kit, EZ lip equivalents to the front and sides, and various LED treatments, oem boot spoiler, [LGT WRC] plates, GFB Respons BOV for extra Pssscchhh! --> Gone... I couldn't afford it's heart transplant... but keep a look out, as it will come back on sale soon!
Purchased recently (12/11/2013), already with: Stage 2 Pedders lowered springs, rear Whiteline sway bar, Advan Racing TCII 18x8 wheels, k&N pod filter, custom 3" exhaust system from turbo back with Magnaflow mufflers. ECUTEK tune of some sort (hopefully soon to be fixed)..... now FIXED!! Now KiDo Tuned!
Added: HID kit, EZ lip equivalents to the front and sides, and various LED treatments, oem boot spoiler, [LGT WRC] plates, GFB Respons BOV for extra Pssscchhh! --> Gone... I couldn't afford it's heart transplant... but keep a look out, as it will come back on sale soon!
-
d-chang - -stickered-
- Posts: 636
- Joined: Tue Feb 21, 2012 6:29 pm
- Location: Perth, Western Australia
- Car: MY05 Liberty GT
- Real name: Daniel
- Profile URL: viewtopic.php?f=7&t=15749
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests