Fuel Consumption on 3.0

Posts specific to the 3.0 litre NA H6 engine

Re: Fuel Consumption on 3.0

Postby smythie » Wed Apr 11, 2012 12:29 pm

Last tank was around 10.2l/100km. We live in Parramatta, I work in Burwood. Has been a generally light run in and back recently as we usually get 11-11.5 in normal day-to-day commuting
Flag Bitch

MY06 3.0RB
User avatar
smythie
 
Posts: 5227
Joined: Mon Oct 27, 2008 12:46 pm
Location: Sydney (w-end)
Car: MY06 3RB - Blue

Re: Fuel Consumption on 3.0

Postby alessandro132 » Thu Apr 12, 2012 11:41 am

smythie wrote:Last tank was around 10.2l/100km. We live in Parramatta, I work in Burwood. Has been a generally light run in and back recently as we usually get 11-11.5 in normal day-to-day commuting


Wow, 10.2L/100km along Parramatta Rd is pretty impressive, irrespective of whether the traffic was light. I used to drive that road every day for 4 years when I went to uni so I know what a bitch it can be! Just out of interest, how would you describe your driving style? Shifting around 3k revs and engine braking where possible?
TEAM TOYOTA | TEAM HKS

Cusco, HPI, HKS, and a few other bits...
User avatar
alessandro132
-stickered-
 
Posts: 2380
Joined: Wed Mar 21, 2012 8:40 am
Location: Sydney
Car: 2000 JZX100 Toyota Chaser Tourer V
Real name: Al
Profile URL: viewtopic.php?f=10&t=16914

Re: Fuel Consumption on 3.0

Postby Tradewind » Fri Apr 13, 2012 1:14 pm

Other fuel saving methods - that I sometimes use

Shift, 1st, 2nd, 3rd (some revs) then 6th, works well and saves plenty fuel. You can skip other gears too and come up with a less gear shifts plan to suit you. After an XRT tune I find if no one around a start from 3rd gear is easy too with very minimal clutch slip, again saves fuel

Never go over 3000 and if you have a Sat Nav dash then keep an eye on fuel use indicator, keep it low
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Fuel Consumption on 3.0

Postby alessandro132 » Fri Apr 13, 2012 3:27 pm

I usually go 1, 2, 3, 4, 6 but this depends of course on my average cruising speed and whether there is a reasonable flow of traffic. On slowing down to a stop, it's usually a gradual 6, 5, 3, until I'm under 20km/h then pop into N.
TEAM TOYOTA | TEAM HKS

Cusco, HPI, HKS, and a few other bits...
User avatar
alessandro132
-stickered-
 
Posts: 2380
Joined: Wed Mar 21, 2012 8:40 am
Location: Sydney
Car: 2000 JZX100 Toyota Chaser Tourer V
Real name: Al
Profile URL: viewtopic.php?f=10&t=16914

Re: Fuel Consumption on 3.0

Postby Blitzen06Wgn » Fri Apr 13, 2012 11:54 pm

I read recently in another forum, Whirpool I think, that replacing the standard rear mufflers with something better- freer flowing - was good for 1 less l/100km. Can anyone verify that
[b][i]TEAM BLACK. TEAM WAGON
2006 BP 3.0R SPEC B Blitzen Wagon 5AT 4WD
User avatar
Blitzen06Wgn
 
Posts: 133
Joined: Fri Dec 10, 2010 2:43 pm
Location: Perth
Car: 2006 3.0R-B Blitzen Wagon
Real name: Martin

Re: Fuel Consumption on 3.0

Postby bates91 » Sat Apr 14, 2012 12:06 am

Blitzen06Wgn wrote:I read recently in another forum, Whirpool I think, that replacing the standard rear mufflers with something better- freer flowing - was good for 1 less l/100km. Can anyone verify that


probably...although its offset by a heavier right foot because swapping out mufflers sounds better and im a sucker for WOT noise :lol:
User avatar
bates91
-stickered-
 
Posts: 1266
Joined: Wed Sep 22, 2010 11:02 pm
Location: Sydney
Car: BMW 135i
Real name: Edward
Profile URL: viewtopic.php?f=10&t=15799

Re: Fuel Consumption on 3.0

Postby Tradewind » Sat Apr 14, 2012 7:28 am

Blitzen06Wgn wrote:I read recently in another forum, Whirpool I think, that replacing the standard rear mufflers with something better- freer flowing - was good for 1 less l/100km. Can anyone verify that


At cruise speeds I dont believe that mod will do any thing, the engine is pumping just very small volumes of air at cruise, it could get it all out through just one of the pipes and still run along fine
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Fuel Consumption on 3.0

Postby kleinerbastler » Sat Apr 14, 2012 8:13 am

Tim, i can agree. Often i use the 3th gear after the first one, much smoother for cruising, and from the 3th in the 5th gear.
For cruising the 6MT is to short, you have to have revs to shift smooth 1-2-3.
How much this shifting will influence the fuel consumption - no idea ;). But i don´t believe that only new muffler can have a great influence to it.
kleinerbastler
 
Posts: 158
Joined: Wed Aug 25, 2010 5:37 pm
Car: Subaru Legacy 3.0R Spec B MY2006

Re: Fuel Consumption on 3.0

Postby chanham » Mon May 28, 2012 9:05 pm

Just got my auto 3.0R MY05 about 3 weeks ago and its been pretty intense on the fuel. checked my average, turned out to be 18.8L/100k! Im currently using 98 octane and doing all of my driving around suburbs. Id say my driving style is fairly light, with the odd 'boot' here and there. any idea why id be getting these figures? tips? (use 95 octane?). I am coming from driving a 1.8L manual corolla so maybe that might be a factor!
User avatar
chanham
formerly ciand06
 
Posts: 593
Joined: Mon May 28, 2012 12:18 am
Location: Perth, Western Australia
Car: Subaru Liberty 3.0R 2004
Profile URL: viewtopic.php?f=10&t=18831

Re: Fuel Consumption on 3.0

Postby Tim_ » Mon May 28, 2012 9:11 pm

Im a new owner of a Auto 3.0R MY06 and my average is around 10-12l/100k and as its a new car i obviously had to 'blow out the cobwebs' so not the lightest of foot...somthing doesnt sound right there if your getting 18.8L/100k
User avatar
Tim_
 
Posts: 257
Joined: Tue May 08, 2012 7:39 pm
Location: Gold Coast QLD
Car: my06 liberty 3.0r
Profile URL: viewtopic.php?f=7&t=17247

Re: Fuel Consumption on 3.0

Postby chanham » Mon May 28, 2012 9:15 pm

yep! wondering what fuel everyone uses? 95 vs 98?
User avatar
chanham
formerly ciand06
 
Posts: 593
Joined: Mon May 28, 2012 12:18 am
Location: Perth, Western Australia
Car: Subaru Liberty 3.0R 2004
Profile URL: viewtopic.php?f=10&t=18831

Re: Fuel Consumption on 3.0

Postby alessandro132 » Mon May 28, 2012 9:18 pm

ciand06 wrote:yep! wondering what fuel everyone uses? 95 vs 98?


Definitely 98. Have you checked your air filter? If it's filthy and clogged that will result in poor fuel economy. Also run some injector cleaner :wink:
TEAM TOYOTA | TEAM HKS

Cusco, HPI, HKS, and a few other bits...
User avatar
alessandro132
-stickered-
 
Posts: 2380
Joined: Wed Mar 21, 2012 8:40 am
Location: Sydney
Car: 2000 JZX100 Toyota Chaser Tourer V
Real name: Al
Profile URL: viewtopic.php?f=10&t=16914

Re: Fuel Consumption on 3.0

Postby Tim_ » Mon May 28, 2012 9:33 pm

I use 95, considering going to 98 though
User avatar
Tim_
 
Posts: 257
Joined: Tue May 08, 2012 7:39 pm
Location: Gold Coast QLD
Car: my06 liberty 3.0r
Profile URL: viewtopic.php?f=7&t=17247

Re: Fuel Consumption on 3.0

Postby chanham » Mon May 28, 2012 11:13 pm

yeah i think ill be sticking to 98, reset the trip computer and drove around alittle, dropped down to about 15.6L/100k. ill give it alittle longer...whats acceptable for normal suburb driving?
User avatar
chanham
formerly ciand06
 
Posts: 593
Joined: Mon May 28, 2012 12:18 am
Location: Perth, Western Australia
Car: Subaru Liberty 3.0R 2004
Profile URL: viewtopic.php?f=10&t=18831

Re: Fuel Consumption on 3.0

Postby Blitzen06Wgn » Tue May 29, 2012 1:24 am

Bumper to bumper traffic and revving to 4000+ I'm looking at low to mid 12s. Some freeway driving non-peak hour (not too many red lights) it's more like high 10s. I'd have to tow my boat full of concrete and never get out of 3rd gear to get 15s. I'd get a checkup/tune for sure.
[b][i]TEAM BLACK. TEAM WAGON
2006 BP 3.0R SPEC B Blitzen Wagon 5AT 4WD
User avatar
Blitzen06Wgn
 
Posts: 133
Joined: Fri Dec 10, 2010 2:43 pm
Location: Perth
Car: 2006 3.0R-B Blitzen Wagon
Real name: Martin

PreviousNext

Return to 3.0R & 3.6R engine specific

Who is online

Users browsing this forum: No registered users and 13 guests