Which Exhaust to go for? Just bought the Megan. Pics up

by **thisisadu** » Wed Mar 02, 2011 8:59 am

Hey all

I have been looking at getting a catback for my car
Currently since phat isn't making anymore of his quads I have seen that I am interested in

Does anyone have any experience with Megan Racing's OE-RS exhaust? The video of it sure sounds good and looks great, but I just wanted some first hand info on it
http://www.meganracingperformance.com/0 ... 99354.html

Also, there are the Invidia Q300's which I have seen someone on this forum have, but cannot find any pictures or videos of it
http://www.invidia-usa.com/Products.aspx?ProductID=220

Which one do you guys recommend and why?

Thanks for the help

by **Kekotic** » Wed Mar 02, 2011 9:08 am

Actually PHAT will be making more quads, you just have to wait.
Still no ETA as he is waiting for a new muffler type to arrive so he can redesign the quads, but it is happening.

by **Arith** » Wed Mar 02, 2011 9:37 am

thisisadu wrote:Does anyone have any experience with Megan Racing's OE-RS exhaust? The video of it sure sounds good and looks great, but I just wanted some first hand info on it
http://www.meganracingperformance.com/0 ... 99354.html

Man, $629 USD for a stainless steel catback? That's cheap! Looks pretty good too. And even if you factor in $150 for shipping, you're still a cool $500 cheaper than HiTechs, and that's just mufflers.

by **thisisadu** » Wed Mar 02, 2011 10:54 am

Arith wrote:
thisisadu wrote:Does anyone have any experience with Megan Racing's OE-RS exhaust? The video of it sure sounds good and looks great, but I just wanted some first hand info on it
http://www.meganracingperformance.com/0 ... 99354.html

Man, $629 USD for a stainless steel catback? That's cheap! Looks pretty good too. And even if you factor in $150 for shipping, you're still a cool $500 cheaper than HiTechs, and that's just mufflers.

Yeah, I was quoted $300USD for shipping from the States.

by **senator** » Wed Mar 02, 2011 11:01 am

Is it just me or does the Q300 system appear to have different sized mufflers to compensate for the flow.

Btw, my money would be on the Megan system, seems a lot more symmetrical, also are great price for a stainless cat back.

I just hope you can source one in OZ without having to wait too long for it.

by **thisisadu** » Wed Mar 02, 2011 11:09 am

I've been quoted about:

$900USD for the Megan Racing OE-RS system and

$1000USD for the Invidia Q300

both delivered

by **thisisadu** » Wed Mar 16, 2011 8:43 pm

: DSC_0289 small.jpg (174.66 KiB) Viewed 5522 times

: DSC_0293 small.jpg (157.38 KiB) Viewed 5522 times

by **Arith** » Wed Mar 16, 2011 9:25 pm

Looks good! Is it just me or does the right side hang a bit low? But yeah, day time pics when you get a chance!

Oh, and please please a vid of the exhaust note when you can for the exhaust video section!

by **thisisadu** » Wed Mar 16, 2011 11:55 pm

Arith wrote:Looks good! Is it just me or does the right side hang a bit low? But yeah, day time pics when you get a chance!

Oh, and please please a vid of the exhaust note when you can for the exhaust video section!

Yeah still needs some work
Right side is a bit lower and comes out a bit further
It just has a light rumble atm
Will be getting a DP when i get my full license

then hopefully the sound is better :lol:

by **Arith** » Thu Mar 17, 2011 12:09 am

If it's only a slight rumble inside, that's pretty good for a catback. What's the size of the centre pipe again? Have you had a chance to evaluate it yet? Enough to write a quick review? I think many on here are curious.

by **Gambit** » Thu Mar 17, 2011 6:27 am

Great job, looks fantastic!

by **thisisadu** » Fri Mar 18, 2011 6:23 am

When I have time I'll try post a quick video of it

I haven't had too much of a chance to drive it as you can see it has P plates on it.... not really worth me losing my license

But yea its a pretty unnoticeable difference especially inside the car

It is a 3inch centre with a hotdog split to a 2.5 for the Y-pipe

It says direct bolt on from the website but it doesn't fit too well to the DP, so that needs a bit more work

by **thisisadu** » Fri Mar 18, 2011 10:39 am

senator wrote:I just hope you can source one in OZ without having to wait too long for it.

shipping was via UPS and took 4 working days from the states

by **Kekotic** » Fri Mar 18, 2011 10:46 am

So are you happy/unhappy with the sound?

by **thisisadu** » Fri Mar 18, 2011 11:05 am

I used a pretty bad camera so the pics arent great and the video is worse....

I'll put some better ones up when i get them

: DSCF0128 small.jpg (229.12 KiB) Viewed 5435 times

: DSCF0127 small.jpg (242.38 KiB) Viewed 5435 times