Australian Liberty Owners Club

Skip to content

H&R springs and eyelids installed.

Show off what mods you've done to your car.
Post a reply

H&R springs and eyelids installed.

Postby 04GTLIB » Sun Sep 06, 2009 7:39 pm

Here's a few pics with the H&R springs and the new eyelids installed. Hope you like them.

Image

Image

Image

Image

Cheers,
Rusty.
Last edited by 04GTLIB on Mon Sep 07, 2009 5:42 pm, edited 3 times in total.
19" Koya wheels - STI front lip - STI Scuff Plates - STI Shift Knob - STI Pedal Set - Blitz A/C filter - Battery and ABS covers - Hyperflow TMIC - Auto Meter boost gauge and fabricated pod - EXOTIC EXHAUST ceramic coated dump pipe, hi flow cat, 3" centre pipe and fabricated rear mufflers - BC Racing Coil Overs - Phat lower control arm bushes - Whiteline rear camber bushes - Rallitek end links - Valenti LED tail lights - DBA Slotted rotors - QFM pads - Goodridge Brake Lines.
Coming soon - Spec B front - Kinugawa turbo upgrade
User avatar
04GTLIB
 
Posts: 849
Joined: Fri Feb 20, 2009 10:18 pm
Location: Brisbane
Car: MY04 GT Liberty Wagon
Real name: Russell
Top

Re: H&R springs and eyelids installed.

Postby THERB3 » Sun Sep 06, 2009 7:49 pm

Hey Russell can I ask were you got your eyelids from and how much ?

Thx.
MY05 Subaru Liberty Wagon 3.0RB Silver 6MT

Modifications:
19" Rays/Volk GT30 Wheels :: Hi Tech Mufflers :: HKS Panel Filter :: STi Front Lip :: 6000K HID Driving/Fog Lights :: LED Parkers/Licence/Map/Dome :: Brembo Package :: V-Tune :: Tein Flex Coilovers & EDFC Controller :: HKC Carbon Bonnet Scoop :: Hanabi Smoked LED Rear Tail Lights :: Eyelids :: Goodridge Braided Lines :: JDM Front Bar :: Corazon Grille :: Pioneer AVH-X8650BT / Alpine PDX5 Amp

Current Plans:Whiteline SwayBars ::
User avatar
THERB3
-stickered-
 
Posts: 1522
Joined: Sun Jun 08, 2008 8:05 am
Location: Melbourne
Car: MY05 Subaru Liberty 3.0RB Wagon
Real name: Hazza
Top

Re: H&R springs and eyelids installed.

Postby Arith » Sun Sep 06, 2009 8:36 pm

Naw, looks like crap dude .... LOL! Just kidding Rusty. Looks fantastic! Very nice and clean. Except for the trailer hitch, there's a lot of little touches that really give it definition. Nice work!

[ Former Liberty ... Slightly Modified -> Click here for modifications & profile ]
User avatar
Arith
-stickered-
 
Posts: 6111
Joined: Mon Oct 08, 2007 2:05 am
Location: Sydney (Wes-Sieed!)
Car: MY11 Volvo S60 T6
Real name: Jim
Top

Re: H&R springs and eyelids installed.

Postby 04GTLIB » Sun Sep 06, 2009 8:43 pm

THERB3 wrote:Hey Russell can I ask were you got your eyelids from and how much ?

Thx.


PM sent.
19" Koya wheels - STI front lip - STI Scuff Plates - STI Shift Knob - STI Pedal Set - Blitz A/C filter - Battery and ABS covers - Hyperflow TMIC - Auto Meter boost gauge and fabricated pod - EXOTIC EXHAUST ceramic coated dump pipe, hi flow cat, 3" centre pipe and fabricated rear mufflers - BC Racing Coil Overs - Phat lower control arm bushes - Whiteline rear camber bushes - Rallitek end links - Valenti LED tail lights - DBA Slotted rotors - QFM pads - Goodridge Brake Lines.
Coming soon - Spec B front - Kinugawa turbo upgrade
User avatar
04GTLIB
 
Posts: 849
Joined: Fri Feb 20, 2009 10:18 pm
Location: Brisbane
Car: MY04 GT Liberty Wagon
Real name: Russell
Top

Re: H&R springs and eyelids installed.

Postby Sentinel » Sun Sep 06, 2009 9:53 pm

Shite! I forgot you had 20's! Good job mate! :good: Looks the goods. How you go for clipping the front guards or are you all clear?

Like the lip too. :wink:
Memoirs of Sentinel:
GT-B | Black | Wagon | Manual | Brembo's | 19"x8 Blaque Diamond Wheels | Tein C/O's w EDFC | Custom Interior | PHAT Zorst | WL Sways | STi Stuff...
Sentinel
-stickered-
 
Posts: 3148
Joined: Sun Feb 22, 2009 8:43 pm
Location: Melbourne
Top

Re: H&R springs and eyelids installed.

Postby teK-- » Sun Sep 06, 2009 10:08 pm

Looks nice, love the dish as well :D. But def need to get those front guards rolled or pumped they must be rubbing like all hell!
MY04 2.5i Safety 5MT Sedan "Project Locomotive"
..: JDM Subaru-AVO-Whiteline-Bilstein-Swift Springs-Cusco-Rallitek-GT Brakes-Remsa-K4RT30Y-Blitz-Philips-Défi-STI-Sabelt-Redline-Alpine-Polk Audio-Kenwood-Dynamat :..
User avatar
teK--
-stickered-
 
Posts: 4064
Joined: Thu Jun 11, 2009 5:02 pm
Location: Melbourne
Top

Re: H&R springs and eyelids installed.

Postby sundayDriver » Sun Sep 06, 2009 10:09 pm

Good job, wheels look like they fit real nice now. Would be great if you had side profile photo and let us know how the springs ride.
It's the fastest who gets paid, it's the fastest who gets laid.
sundayDriver
 
Posts: 831
Joined: Wed Jan 09, 2008 2:16 pm
Location: A.C.T.
Top

Re: H&R springs and eyelids installed.

Postby Hotwire » Sun Sep 06, 2009 10:29 pm

Wow, that looks tough! :bb:

Can I ask you, are you running the 04 Non Bilstein Struts still? If so, can you get H&R Springs to fit them can you? How much and from where?

Also, where did you get the STi lip from? Looking for one for my wagon.

Cheers!
Lee :)
|MY04 Liberty GT Wagon - Premium| |Anti Lift Kit | 18% Tint | 18" Speedy Fin7 |Now the Wifes|
|MY09 MkV Volkswagen GTi| | DSG | Leather | Sunroof | 18% Tint | Mine! |
User avatar
Hotwire
 
Posts: 928
Joined: Wed Feb 25, 2009 9:36 pm
Location: Adelaide, SA
Car: MY04 GT Wagon Premium
Real name: Lee
Top

Re: H&R springs and eyelids installed.

Postby 04GTLIB » Mon Sep 07, 2009 5:34 pm

Sentinel wrote:Shite! I forgot you had 20's! Good job mate! :good: Looks the goods. How you go for clipping the front guards or are you all clear?

Like the lip too. :wink:


I got the guards rolled and there's no problem with them.
The only problem I'm having is with the plastic inner guard which I'll sought out when I get a week end off from work.

Cheers.
19" Koya wheels - STI front lip - STI Scuff Plates - STI Shift Knob - STI Pedal Set - Blitz A/C filter - Battery and ABS covers - Hyperflow TMIC - Auto Meter boost gauge and fabricated pod - EXOTIC EXHAUST ceramic coated dump pipe, hi flow cat, 3" centre pipe and fabricated rear mufflers - BC Racing Coil Overs - Phat lower control arm bushes - Whiteline rear camber bushes - Rallitek end links - Valenti LED tail lights - DBA Slotted rotors - QFM pads - Goodridge Brake Lines.
Coming soon - Spec B front - Kinugawa turbo upgrade
User avatar
04GTLIB
 
Posts: 849
Joined: Fri Feb 20, 2009 10:18 pm
Location: Brisbane
Car: MY04 GT Liberty Wagon
Real name: Russell
Top

Re: H&R springs and eyelids installed.

Postby 04GTLIB » Mon Sep 07, 2009 5:38 pm

teK-- wrote:Looks nice, love the dish as well :D. But def need to get those front guards rolled or pumped they must be rubbing like all hell!


I love the dish on them too Jim. Guards are rolled so no drama's rubbing, just gotta sought out the plastic inner guard problem.

Cheers.
19" Koya wheels - STI front lip - STI Scuff Plates - STI Shift Knob - STI Pedal Set - Blitz A/C filter - Battery and ABS covers - Hyperflow TMIC - Auto Meter boost gauge and fabricated pod - EXOTIC EXHAUST ceramic coated dump pipe, hi flow cat, 3" centre pipe and fabricated rear mufflers - BC Racing Coil Overs - Phat lower control arm bushes - Whiteline rear camber bushes - Rallitek end links - Valenti LED tail lights - DBA Slotted rotors - QFM pads - Goodridge Brake Lines.
Coming soon - Spec B front - Kinugawa turbo upgrade
User avatar
04GTLIB
 
Posts: 849
Joined: Fri Feb 20, 2009 10:18 pm
Location: Brisbane
Car: MY04 GT Liberty Wagon
Real name: Russell
Top

Re: H&R springs and eyelids installed.

Postby 04GTLIB » Mon Sep 07, 2009 5:44 pm

sundayDriver wrote:Good job, wheels look like they fit real nice now. Would be great if you had side profile photo and let us know how the springs ride.


Side shot added and I have to say it rides great, even with the 20's fitted.

Cheers.
19" Koya wheels - STI front lip - STI Scuff Plates - STI Shift Knob - STI Pedal Set - Blitz A/C filter - Battery and ABS covers - Hyperflow TMIC - Auto Meter boost gauge and fabricated pod - EXOTIC EXHAUST ceramic coated dump pipe, hi flow cat, 3" centre pipe and fabricated rear mufflers - BC Racing Coil Overs - Phat lower control arm bushes - Whiteline rear camber bushes - Rallitek end links - Valenti LED tail lights - DBA Slotted rotors - QFM pads - Goodridge Brake Lines.
Coming soon - Spec B front - Kinugawa turbo upgrade
User avatar
04GTLIB
 
Posts: 849
Joined: Fri Feb 20, 2009 10:18 pm
Location: Brisbane
Car: MY04 GT Liberty Wagon
Real name: Russell
Top

Re: H&R springs and eyelids installed.

Postby 04GTLIB » Mon Sep 07, 2009 5:49 pm

Hotwire wrote:Wow, that looks tough! :bb:

Can I ask you, are you running the 04 Non Bilstein Struts still? If so, can you get H&R Springs to fit them can you? How much and from where?

Also, where did you get the STi lip from? Looking for one for my wagon.

Cheers!
Lee :)


Lee.

Yes mate I'm still running the non-Bilstein struts and the springs I picked up second hand from here. :wink:

I scored the STI lip locally, it was advertised on another forum.

Cheers.
19" Koya wheels - STI front lip - STI Scuff Plates - STI Shift Knob - STI Pedal Set - Blitz A/C filter - Battery and ABS covers - Hyperflow TMIC - Auto Meter boost gauge and fabricated pod - EXOTIC EXHAUST ceramic coated dump pipe, hi flow cat, 3" centre pipe and fabricated rear mufflers - BC Racing Coil Overs - Phat lower control arm bushes - Whiteline rear camber bushes - Rallitek end links - Valenti LED tail lights - DBA Slotted rotors - QFM pads - Goodridge Brake Lines.
Coming soon - Spec B front - Kinugawa turbo upgrade
User avatar
04GTLIB
 
Posts: 849
Joined: Fri Feb 20, 2009 10:18 pm
Location: Brisbane
Car: MY04 GT Liberty Wagon
Real name: Russell
Top

Re: H&R springs and eyelids installed.

Postby Sentinel » Mon Sep 07, 2009 6:03 pm

Good work mate on the fender rolling! Looks real close.

BTW - You better learn how to do multiple quotes in the one post otherwise some on here might think your post whoring... :wink:

No-one on here does that tho... :angel:
Memoirs of Sentinel:
GT-B | Black | Wagon | Manual | Brembo's | 19"x8 Blaque Diamond Wheels | Tein C/O's w EDFC | Custom Interior | PHAT Zorst | WL Sways | STi Stuff...
Sentinel
-stickered-
 
Posts: 3148
Joined: Sun Feb 22, 2009 8:43 pm
Location: Melbourne
Top

Re: H&R springs and eyelids installed.

Postby 04GTLIB » Mon Sep 07, 2009 6:57 pm

Sentinel wrote:Good work mate on the fender rolling! Looks real close.

BTW - You better learn how to do multiple quotes in the one post otherwise some on here might think your post whoring... :wink:

No-one on here does that tho... :angel:


:mrgreen: :mrgreen: :mrgreen:

Cheers,
Rusty.
19" Koya wheels - STI front lip - STI Scuff Plates - STI Shift Knob - STI Pedal Set - Blitz A/C filter - Battery and ABS covers - Hyperflow TMIC - Auto Meter boost gauge and fabricated pod - EXOTIC EXHAUST ceramic coated dump pipe, hi flow cat, 3" centre pipe and fabricated rear mufflers - BC Racing Coil Overs - Phat lower control arm bushes - Whiteline rear camber bushes - Rallitek end links - Valenti LED tail lights - DBA Slotted rotors - QFM pads - Goodridge Brake Lines.
Coming soon - Spec B front - Kinugawa turbo upgrade
User avatar
04GTLIB
 
Posts: 849
Joined: Fri Feb 20, 2009 10:18 pm
Location: Brisbane
Car: MY04 GT Liberty Wagon
Real name: Russell
Top
Post a reply

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 48 guests

Powered by phpBB® Forum Software © phpBB Group