Has anyone seen a MY05 3RB aftermarket front bar?

[hin249]

as title that I mentioned, I hv searched with many sites, still cant see any, only found a front lip, side skirt.........thats all!!

[gubbo]

i thought that for 04-06, you can get any of the aftermarket front bars but you'll also need to get a new grille.
The lights of all the 04-06 are all the same, just that the 3RB has a different front bar with a different grille.
Other than that, I think that they're all interchangable (i.e. 04-06 3RB front bar & grille can go onto any other
04-06 lib, and the 04-06 lib can have any front bar but also needs the grille)

[tangcla]

Any pre-facelift front bar will fit the 3RB. You might need different foglights and foglight mounts though.

If you get stuff designed for the pre-facelift Spec.B (like my one) then you keep your grille.

[Posseltperformance]

Does anyone with aftermarket front bars for a pre-facelift model want to upload their pics into here? I know I would appreciate it!

[hin249]

i thought that for 04-06, you can get any of the aftermarket front bars but you'll also need to get a new grille.
The lights of all the 04-06 are all the same, just that the 3RB has a different front bar with a different grille.
Other than that, I think that they're all interchangable (i.e. 04-06 3RB front bar & grille can go onto any other
04-06 lib, and the 04-06 lib can have any front bar but also needs the grille)

therefore, I can get any MY04-06 2.0/2.0T after market front bar with the MY04-06 2.0/2.0T grille, then
i.e. it will look excatly the same as 2.0N/A?? haha
r u guys 100% sure??

Thx GUBBO and CLARENCE

[hin249]

Does anyone with aftermarket front bars for a pre-facelift model want to upload their pics into here? I know I would appreciate it!

i got some in my PC, hope u can get some idea abt this!! hehe
some of them r the forums members!!

[smythie]

therefore, I can get any MY04-06 2.0/2.0T after market front bar with the MY04-06 2.0/2.0T grille, then
i.e. it will look excatly the same as 2.0N/A?? haha
r u guys 100% sure??

Yes it should fit. I have been toying with the idea as well but it's way down the list of priorities at the moment. Not sure how much it would cost.

mmmm puts me in mind of the old RS Turbo. Tasty

[04GT]

The memories, I sometimes miss my Liberty

[Posseltperformance]

I got a quote for the Gialla front bar from the Phat - it was around $1400 (from memory) delivered with LED gialla foggies. Experience from the last car tells me between $600 - $900 to get it fitted and painted. $1000 if it doesn't fit too well and requires some work.

total should really be under 2K on the car lookin sexy

[maxsubi]

I really like this setup. Is it made by Blitzen? What's the name of it?

[Lib 3.0LR]

It's called DAMD here's the link: http://www.rhdjapan.com/damd-frp-full-a ... -d-f-62371
also try this site http://www.japanparts.com/db/partslist. ... =11&page=1

[Gambit]

Some nice front bars there...

[Gambit]

Bc8282's front bar above, can anyone tell me what bar it is and where you can get it from?