Member profile - gordy, now with base dyno run

[fatfrog02]

Autotech Engineering in Granville.
http://www.autotechengineering.com.au/

[smythie]

For info, they use ecutek rather than open source but have some great reviews as can be seen in swingn's cancelled group tune with them

[gordy]

Thanks guys, i'll give Autotech a call tomorrow.

Im hopefully going to remove my mufflers today. Will keep the AVO TMIC on the car as I doubt it makes that much difference(without tune of course).

also ordered some 750cc injectors today:

wm_tf.jpg (32.69 KiB) Viewed 3791 times

And I decided on the COBB SF intake (also ordered):

L_3840.jpg (13.21 KiB) Viewed 3791 times

Still have a few more bits to gather, but getting there slowly.

[gordy]

I have a dyno run booked for tomorrow. Decided to do the long drive out to Pulse as I thought it might be best to use the same dyno for the before/after comparison.

Also bought some more bits today

[Sentinel]

I have a dyno run booked for tomorrow. Decided to do the long drive out to Pulse as I thought it might be best to use the same dyno for the before/after comparison.

Also bought some more bits today

They look like the ones from ImportMonster - off an STi Forester in Jap??

Either way, you've got some nice bits and pieces ready to go on your Lib!

[gordy]

They look like the ones from ImportMonster - off an STi Forester in Jap??

Either way, you've got some nice bits and pieces ready to go on your Lib!

Guilty! Was that you that outbid me initially?

[senator]

I have a dyno run booked for tomorrow. Decided to do the long drive out to Pulse as I thought it might be best to use the same dyno for the before/after comparison.

Also bought some more bits today

so how did your base run go?

i see those nuggets with need some extra offset ......... what wheels have you got coming?

[gordy]

so how did your base run go?

i see those nuggets with need some extra offset ......... what wheels have you got coming?

Pretty sure I'm going to use some charcoal enkei's, but wont know for a few weeks

Dyno graphs below. I meant to ask for RPM as the X axis, but I was in a bit of a rush. But its better than nothing. Was a little surprised by 123Kw, thought it would have been more. But I guess this means I have a lot to look forward to then!

[Sentinel]

They look like the ones from ImportMonster - off an STi Forester in Jap??

Either way, you've got some nice bits and pieces ready to go on your Lib!

Guilty! Was that you that outbid me initially?

Nah mate - already got Brembo's.
Just been watchin the market recently and saw them.

[WhiteGTB]

Gordon, by the time the tune is done.... you'll be driving a totally different car man. All the parts that are going on are top notch!

[Boxer]

Dyno graphs below. I meant to ask for RPM as the X axis, but I was in a bit of a rush. But its better than nothing. Was a little surprised by 123Kw, thought it would have been more. But I guess this means I have a lot to look forward to then!

Prolly only a few kw down on the average, but certainly within the expected range.

As you say lots to look forward to

[SillySora]

hey i got mine dyno stock also 121 auto

[gordy]

Yea it seems pretty normal, I see there is another graph posted recently by parso_rex here:
viewtopic.php?f=10&t=5596

His figures were also 125kW, so it seems like a common figure.

[Arith]

Yeah, so far I've seen 120kw - 130kw on average on a conversative dyno.

[gordy]

Ive had to push my install back to the 16th as I'm having trouble getting time of work. Sucks as i've gone back to stock Mufflers in preparation for the Phat system and they suck a$$. Any one running stock mufflers, trust me you need to get them replaced with something better!!!

However, whilst I wait Ive also decided to replace the inlet hose and the BOV (thanks Phat!).

Sore more pretty bits to add to the mod list