AVO Turbo Inlet Tube

[GTSPECB STI]

Got a good deal from a local vendor on this item and picked it up yesterday. Goes in next week and I will provide some feedback once I have some.

[gordy]

Are you running a panel or pod filter? Really interested to see what you think about any additional noise after the install as I'm considering one of these.

Thanks,

Gordon

[GTSPECB STI]

HKS panel filter, resonator removed, zero sports maf tube, avo tmic, throttle body silicon bit, 3" phat dump and centre to hitech quads. I doubt I will hear any noticable increase in sound by adding this tube.

[Arith]

LOL! Dave you tease!

We need to have another section for people like you who post their 'newly arrived deliveries' but the mod has yet to be on the car yet.

[GTSPECB STI]

excellent idea Jim, another thread for post whoring!!!

[fatfrog02]

Hi GTSPECB

The inlet pipe you have is for the MY03-05 GT. Will still fit MY07+ lib but requires a t-piece and cutting of your engine cover.

The correct inlet pipe for MY07+ is S1B07G41ABLU
http://www.avoturboworld.com/avoshop/pr ... cts_id=609

I got the same pipe as yours originally and had to exchange it when I worked out what was going on.
Check out Mo GT install
viewtopic.php?f=10&t=4412&p=59167&hilit=avo+inlet#p59167

[GTSPECB STI]

Hi GTSPECB

The inlet pipe you have is for the MY03-05 GT. Will still fit MY07+ lib but requires a t-piece and cutting of your engine cover.

The correct inlet pipe for MY07+ is S1B07G41ABLU
http://www.avoturboworld.com/avoshop/pr ... cts_id=609

I got the same pipe as yours originally and had to exchange it when I worked out what was going on.
Check out Mo GT install
viewtopic.php?f=10&t=4412&p=59167&hilit=avo+inlet#p59167

Nope its for an MY07 and this has been confirmed with Steve from AVO. Engine cover doesn't even sit on my car as I have the larger AVO TMIC already.

[coyote]

I have never bought anything from AVO that fit properly first time (and I've purchased a bit from them).

[GTSPECB STI]

I have never bought anything from AVO that fit properly first time (and I've purchased a bit from them).

My mechanic says the same thing but he is very good at overcoming any minor fitment issues and he has seen AVO gear.

I should NOTE this is NOT a DIY for me!

[senator]

LOL! Dave you tease!

We need to have another section for people like you who post their 'newly arrived deliveries' but the mod has yet to be on the car yet.

+1

i really want to hear some feedback about the extra noise, i have the exact same intake set up as you dave.

[Mo_GT]

Hi GTSPECB

The inlet pipe you have is for the MY03-05 GT. Will still fit MY07+ lib but requires a t-piece and cutting of your engine cover.

The correct inlet pipe for MY07+ is S1B07G41ABLU
http://www.avoturboworld.com/avoshop/pr ... cts_id=609

I got the same pipe as yours originally and had to exchange it when I worked out what was going on.
Check out Mo GT install
viewtopic.php?f=10&t=4412&p=59167&hilit=avo+inlet#p59167

Nope its for an MY07 and this has been confirmed with Steve from AVO. Engine cover doesn't even sit on my car as I have the larger AVO TMIC already.

Dave,
Fatfrog02 is correct, the pipe in the pic is missing a nozzel and the first nozzel (air filter side) will need a notch cut out of the engine cover.

The engine cover can still be used with the avo tmic and i thinks its a good idea to use it as it directs air ontho the intercooler from the scoop. It will taking a bit of trimming but i got mine to fit reasonably well.

Mo

[GTSPECB STI]

I am aware of the slight mod required and as I previously stated my mechanic is doing this install. They have seen the part and my car as they did my tmic install previously. Thanks for the heads up just the same.

[Jimmy S]

Dont be weak Dave... Get your hands dirty!

[GTSPECB STI]

Dont be weak Dave... Get your hands dirty!

ROFL

[SillySora]

I have never bought anything from AVO that fit properly first time (and I've purchased a bit from them).

My mechanic says the same thing but he is very good at overcoming any minor fitment issues and he has seen AVO gear.

I should NOTE this is NOT a DIY for me!

Not wrong on this one cough intercooler pipes