Rotors

Springs, shock absorbers, swaybars,
Brakes, Wheels and Tyres

Postby Arith » Mon Jan 19, 2009 3:38 pm

adam wrote:so how much are the pads jim and who do i get them through?

Give Tony @ V-Sport a call. I think he carries them. I got mine last year from Race Brakes Sydney for $450 (front and rear).

after hearing senators post about his evc i think i'll get one of those as well.

Are you planning on getting a tune any time soon? Because if you are, I recommend getting the tune first. Then if yourself still wanting, to get the EVC. However if a tune is not on the table for a while, the EVC will be a good mod.

[ Former Liberty ... Slightly Modified -> Click
here for modifications & profile ]
User avatar
Arith
-stickered-
 
Posts: 6111
Joined: Mon Oct 08, 2007 2:05 am
Location: Sydney (Wes-Sieed!)
Car: MY11 Volvo S60 T6
Real name: Jim

Postby animal » Wed Jan 21, 2009 12:40 am

Adam try these 6 pot brembo's same as the new GTR and come in 4 colours yellow,red,black and silver the only catch is you need Sti hubs with 114.3 stud pattern with means new wheels
ImageImage
animal
 
Posts: 88
Joined: Thu May 17, 2007 11:26 pm
Location: Adelaide

Postby tangcla » Wed Jan 21, 2009 6:25 am

You can get custom rotors made up for them if that was the case.
www.tangcla.com - photography

Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
User avatar
tangcla
 
Posts: 7409
Joined: Wed Aug 15, 2007 1:47 pm
Location: Melbourne, VIC
Car: B6 Audi S4 (4.2L V8)
Real name: Clarence
Profile URL: http://www.tangcla.com

Postby adam » Wed Jan 21, 2009 7:29 am

they look awsome george!
but a little out of my price range for now.
another question i have is that if decide to get braided lines now and then later i decide to spend on a full kit will they then fit my 2L my05? i would have asked about rotors too but i'm pretty sure its a no.
I spend most of my money on booze, fast cars and women, I just waste the rest...
User avatar
adam
 
Posts: 1431
Joined: Wed Feb 14, 2007 10:23 pm
Location: sydney

Postby swingn » Wed Jan 21, 2009 9:55 am

Pretty sure you can get 6 Pot Brembo's for the Libs (Used on the S402?).

But the kit is very expensive, like $5800 for fronts only. Personally, if you were prepared to pay the much, I'd be looking at AP Racing or Endless.
User avatar
swingn
-stickered-
 
Posts: 4163
Joined: Wed Feb 20, 2008 1:11 pm
Location: Sydney, NSW
Car: MX5 SE / 911 Turbo
Real name: Matt
Profile URL: www.rtdc.com.au

Postby tangcla » Wed Jan 21, 2009 10:01 am

swingn wrote:... Personally, if you were prepared to pay the much, I'd be looking at AP Racing or Endless.

... if anyone was willing to pay that much, they wouldn't be buying it for brand, they'd be buying it for stopping capability.
Brand doesn't matter as long as it stops well.
www.tangcla.com - photography

Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
User avatar
tangcla
 
Posts: 7409
Joined: Wed Aug 15, 2007 1:47 pm
Location: Melbourne, VIC
Car: B6 Audi S4 (4.2L V8)
Real name: Clarence
Profile URL: http://www.tangcla.com

Postby adam » Wed Jan 21, 2009 11:56 am

speaking of pretty brakes, check out these puppies :shock:
http://forum.liberty.asn.au/viewtopic.php?p=53018#53018
I spend most of my money on booze, fast cars and women, I just waste the rest...
User avatar
adam
 
Posts: 1431
Joined: Wed Feb 14, 2007 10:23 pm
Location: sydney

Postby smythie » Wed Jan 21, 2009 12:00 pm

you can have the brakes. I'll take the donk
Flag Bitch

MY06 3.0RB
User avatar
smythie
 
Posts: 5227
Joined: Mon Oct 27, 2008 12:46 pm
Location: Sydney (w-end)
Car: MY06 3RB - Blue

Postby Mano™ » Wed Jan 21, 2009 12:50 pm

Black :)
Mano™
-stickered-
 
Posts: 3442
Joined: Sat Oct 07, 2006 9:52 am
Location: Newcastle
Car: MY06 Liberty GT

Postby animal » Wed Jan 21, 2009 2:50 pm

only a limited number of 6 piston kits where made for s402 but like Tangcla said you by the calipers then have discs custom made. The kit I saw was the frt 6 pot & rr 4 pot with lines,pads,mounts & discs. Both frt & rr calipers are 1 piece & both frt & rr discs are 2 piece full floating, downside is they where for Sti's & $12,000US. As for brake lines Adam you can add that now then upgrade the brakes later as it fits both styles
animal
 
Posts: 88
Joined: Thu May 17, 2007 11:26 pm
Location: Adelaide

Previous

Return to Suspension, Brakes, Wheels and Tyres.

Who is online

Users browsing this forum: No registered users and 5 guests