STI Pink Springs

[BigBCalais]

I've been looking at getting sti pinks but am after a bit of help, I have found them on Nengun's website but is $100 each good?

Also should I be buying the springs listed as 3.0r (ST2033021000) or for a gt specb (ST2033021010) because they would be to suit the bilstein shocks wouldn't they? and for rear springs they have a 3.0r tw (ST2038021020) and a 3.0r b4 (ST2038021030) and I have no idea what the difference is between them?

Any help will be appreciated

[Manaz]

I'd have thought you should order the springs for the 3.0, as the engine weights are slightly different.

Also be aware that there are differences between wagon and sedan springs in the rear.

[BigBCalais]

I thought there would be differences for the wagon too but it says that the springs fit both a sedan and wagon? Which I thought was odd

[KelvinTaylor88]

I thought there would be differences for the wagon too but it says that the springs fit both a sedan and wagon? Which I thought was odd

I recently did a lot of research on this before purchasing my set of sti pinks and found that the different types of pink springs are simply to account for the weight of each car model (hence the differences between manual/auto and sedan/wagon). Spring rates are the exact same for each spring it is just the length that differs.

Great info can be found here including fitment chart: http://legacygt.com/forums/showthread.p ... ml?t=61108
Another great site for fitment info: http://www.rhdjapan.com/sti-coil-spring ... bl-bp.html
Most people seem to be going with the GT Manual set up for a nice even stance (refer to chart on that legacygt post for part numbers)
I went with that setup after seeing it recommended constantly on legacygt and by the guys at Import Monster (they do a great price too), very happy with the ride quality and the stance is nice and even with very little of the "saggy butt" that can be common. Check my build thread for pictures of the stance.

That's just my 2 cents, or 200 cents considering the length of this post

[soundengine]

Old thread but useful. The TW is for Touring Wagon.

3.0r Wagon takes

ST2033021000 Front
ST2038021020 Rear

[BigBCalais]

Old thread but useful. The TW is for Touring Wagon.

3.0r Wagon takes

ST2033021000 Front
ST2038021020 Rear

Forgot I even made this thread haha.

Although helpful info for anyone who stumbles upon this in the future

[soundengine]

Spoke with my local Subaru dealer today, they can actually supply the STI Pink springs at a slightly cheaper price too.

[soundengine]

Brand: STI
Product: Coil Spring Subaru Legacy BL/BP
Part Num: ST2033021000
Part Num: ST2033021010
Part Num: ST2033021020
Part Num: ST2033021030
Part Num: ST2038021000
Part Num: ST2038021010
Part Num: ST2038021020
Part Num: ST2038021030

Available Application:
- Front
- Rear

SPECIFICATIONS:
Color: Cherry-Red Paint
Height Reduction (mm): -15 compare to OEM
Spring Spec:
- Front: K=39N/mm
- Rear: K=59N/mm

COMPATIBILITY NOTES:
Use ST2033021000 as Front Spring for:
- Legacy B4 2.0GT AT Applied A~F
- Legacy B4 WR Limited 2005 AT Applied C
- Legacy B4 3.0R AT Applied A-B
- Legacy B4 3.0R MT/AT Applied C-D
- Legacy B4 3.0Rspec.B MT/AT Applied C~E
- Legacy Touring Wagon 2.0GT AT Applied A~F
- Legacy Touring Wagon WR Limited 2005 AT Applied C
- Legacy Touring Wagon 3.0R AT Applied A-B
- Legacy Touring Wagon 3.0R MT/AT Applied C-D
- Legacy Touring Wagon 3.0Rspec.B MT Applied B
- Legacy Touring Wagon 3.0Rspec.B MT/AT Applied C~E

Use ST2033021010 as Front Spring for:
- Legacy B4 2.0GT MT Applied A~F
- Legacy B4 2.0GTSpec.B AT Applied A~C
- Legacy B4 2.0GTSpec.B MT/AT Applied D~F
- Legacy B4 BLITZEN 2006 AT Applied C
- Legacy B4 tune by STi AT Applied C
- Legacy B4 WR Limited 2004 AT Applied B
- Legacy B4 WR Limited 2005 MT Applied C
- Legacy Touring Wagon 2.0GT MT Applied A~F
- Legacy Touring Wagon 2.0GTSpec.B MT/AT Applied A~F
- Legacy Touring Wagon BLITZEN 2006 MT/AT Applied C
- Legacy Touring Wagon tune by STi MT/AT Applied C
- Legacy Touring Wagon WR Limited 2004 MT/AT Applied B
- Legacy Touring Wagon WR Limited 2005 MT Applied C

Use ST2033021020 as Front Spring for:
- Legacy B4 2.0GTSpec.B MT Applied A~F
- Legacy B4 tune by STi MT Applied C
- Legacy B4 BLITZEN 2006 MT Applied C
- Legacy B4 WR Limited 2004 MT Applied B

Use ST2033021030 as Front Spring for:
- Legacy B4 3.0Rspec.B MT Applied B

Use ST2038021000 as Rear Spring for:
- Legacy B4 2.0GT MT/AT Applied A~F
- Legacy B4 2.0GTSpec.B MT/AT Applied A~F
- Legacy B4 BLITZEN 2006 MT/AT Applied C
- Legacy B4 tune by STi MT/AT Applied C
- Legacy B4 WR Limited 2004 MT/AT Applied B
- Legacy B4 WR Limited 2005 MT/AT Applied C

Use ST2038021010 as Rear Spring for:
- Legacy Touring Wagon 2.0GT MT/AT Applied A~F
- Legacy Touring Wagon WR Limited 2005 MT/AT Applied C

Use ST2038021020 as Rear Spring for:
- Legacy Touring Wagon 2.0GTSpec.B MT/AT Applied A~F
- Legacy Touring Wagon 3.0R AT Applied A-B
- Legacy Touring Wagon 3.0R MT/AT Applied C~E
- Legacy Touring Wagon 3.0Rspec.B MT Applied B
- Legacy Touring Wagon 3.0Rspec.B MT/AT Applied C~D
- Legacy Touring Wagon BLITZEN 2006 MT/AT Applied C
- Legacy Touring Wagon tune by STi MT/AT Applied C
- Legacy Touring Wagon WR Limited 2004 MT/AT Applied B

Use ST2038021030 as Rear Spring for:
- Legacy B4 3.0R AT Applied A-B
- Legacy B4 3.0R MT/AT Applied C~E
- Legacy B4 3.0Rspec.B MT Applied B
- Legacy B4 3.0Rspec.B MT/AT Applied C-D

[shav]

Will they do a group buy?

[soundengine]

STI part list for Liberty

[hollylib]

I thought there would be differences for the wagon too but it says that the springs fit both a sedan and wagon? Which I thought was odd

I recently did a lot of research on this before purchasing my set of sti pinks and found that the different types of pink springs are simply to account for the weight of each car model (hence the differences between manual/auto and sedan/wagon). Spring rates are the exact same for each spring it is just the length that differs.

Great info can be found here including fitment chart: http://legacygt.com/forums/showthread.p ... ml?t=61108
Another great site for fitment info: http://www.rhdjapan.com/sti-coil-spring ... bl-bp.html
Most people seem to be going with the GT Manual set up for a nice even stance (refer to chart on that legacygt post for part numbers)
I went with that setup after seeing it recommended constantly on legacygt and by the guys at Import Monster (they do a great price too), very happy with the ride quality and the stance is nice and even with very little of the "saggy butt" that can be common. Check my build thread for pictures of the stance.

That's just my 2 cents, or 200 cents considering the length of this post

sorry to drag this old thread up
thinking of selling my bc br coilovers, putting my billys back in and getting some sti pink springs for just a little low
so according to the legacygt thread due to 'saggy butt' I should get wagon springs for my sedan?
so the part numbers i would need for my my07 3.0 spec b are
st2033021000 for front and st2038021020

[BigBCalais]

Oddly enough mine sits level with 3.0 sedan springs, whether it still does in 4 years or not is the next question. If you're after a little bit lower I've seen gt springs recommended to make the front lower and that will allow the back a bit more sag before it's lower in the rear

[KelvinTaylor88]

I got GT sedan springs for mine as recommended on that forum to counteract any "saggy bum" effect.
I've got a nice even stance I'm happy with, so does Bryce with his 3.0r springs, so I don't think it really is too big a deal.

Got mine for $290 shipped off IM too btw.

[Smurfette_90]

Just wondering what springs I need for my 09 gt-b sedan?

[bigBADbenny]

It depends on what you want to achieve, your specific model chassis code or actual model year, and if your dampers are worn or faulty.