Hi guys,
Looking for advice on where to start with replacing aged/worn bushings on their wagon. Vehicle is curently at 180,000kms and has just had MCA coilovers installed to replace the old knocking Bilstiens.
Few questions on this;
1. Is there any particular order we need to follow if not all bushings will be replaced at once.
2. Which ones are simple DIY replacements and which ones require specialist tools or a workshop
3. Who do you recommend in Sydney to inspect and report on condition of suspension bushigs and components
4. which brands/kits to go with
5. Approximate cost of this exercise
Cheers