Hi
I'm looking to upgrade calipers. I already have dba t3 4000 front and rear rotors, how do I get the correct calipers to match these rotors? Not sure about calipers and what I should look for.
Surge wrote:Dba t3 4000 is a line of rotors, dba made those in variations to suit different cars so you need to provide more details of the part number.
Also do you have a 2.5i, 3.6 or GT?
FYI: Move all your Load tables from 0.4 over so you lose your 3.0 columns as 2.6 is same values. Insert a 0.3 with values of current 0.2 and then zero out 0.2g/rev column. Apply the brakes at 60mph and tell me what happens
Surge wrote:You could mention the following to your tuner about the brake booster improvement via tune,
See post here:
http://www.romraider.com/forum/viewtopi ... 5&start=15FYI: Move all your Load tables from 0.4 over so you lose your 3.0 columns as 2.6 is same values. Insert a 0.3 with values of current 0.2 and then zero out 0.2g/rev column. Apply the brakes at 60mph and tell me what happens
And a hint here:
http://romraider.com/forum/viewtopic.php?f=15&t=10357
That might give your tuner some ideas.
Surge wrote:Ok, I didn't realise your tuner was Matt.
The only other thing I wanted to mention is thst the STi Master Brake Cylinder might be worth looking into. Some say it pushes more fluid which helps firm up the feel.
Lane wrote:A harder pedal feel does not always equal better stopping power, this must be tested.
Return to Suspension, Brakes, Wheels and Tyres.
Users browsing this forum: No registered users and 3 guests