New Member - MY08 2.5T Spec B Wagon

Introduce yourself

New Member - MY08 2.5T Spec B Wagon

Postby GREIDY » Tue Apr 14, 2015 1:53 pm

Hi all,
Purchased my spec b brand new & have now passed it on to my wife as her daily drive...
minor mods as are listed 2.5 inch mandrel bend stainless, STI tune, STI rear laterall link, STI strut brace, & STI springs on the standard Bilstein dampers
The suspension setup has been great up until 12-18 months ago when it started to get a pretty heavy knock on full lock, when doing a u-turn etc which
i have tightened & lubed each & every service by Subaru but it's getting to the point where i've had enough...
sooooo, i'm wondering if anyone else has experienced the same problem (i'm led to believe it's a common issue with the Bilstein tower) & any feedback on coilovers...???

thanks for taking the time to read & i look forward to any wisdom you can share


cheers
Glenn
GREIDY
 
Posts: 13
Joined: Tue Apr 14, 2015 1:41 pm
Location: Sydney
Car: MY08 Liberty GT-B Spec Wagon
Real name: Glenn

Re: New Member - MY08 2.5T Spec B Wagon

Postby Flat6Estate » Tue Apr 14, 2015 3:19 pm

Knock during u-turns? Sounds more like centre diff issues to me...
MY08 Spec B 3.0L Manual Wagon
1998 Yamaha YZF600R Thundercat - a bit broken :-o
User avatar
Flat6Estate
formerly Timbo_rs2500
 
Posts: 377
Joined: Mon Jun 17, 2013 2:15 pm
Location: Lower Blue Mountains NSW
Car: 2007 MY08 Liberty Wagon 3RB 6spd
Real name: Tim
Profile URL: viewtopic.php?f=10&t=32189&p=425885#p425885

Re: New Member - MY08 2.5T Spec B Wagon

Postby Veldex » Tue Apr 14, 2015 6:41 pm

That sounds like the front CV joints are gone to me. Happened to our old Outback at about ninety thousand kms.
User avatar
Veldex
 
Posts: 60
Joined: Fri Apr 10, 2015 10:49 pm
Car: 2001 Liberty B4 "INB4"
Real name: Jason
Profile URL: viewtopic.php?f=7&t=29819

Re: New Member - MY08 2.5T Spec B Wagon

Postby peadya100 » Tue Apr 14, 2015 8:04 pm

Yeah knock/clunk on full lock is typically a CV joint. But surely subaru would have thought of that if you've been to them. The other one to check is the sway bar end links. When mine loosened after installing my sway bars they clunked on full lock.
Diamond Works SI-DRIVE Covers - Subaru Liberty/Legacy MY07 to MY09

https://www.facebook...aruDiamondWorks
subaru.diamondworks@gmail.com
User avatar
peadya100
-stickered-
 
Posts: 2243
Joined: Wed Dec 08, 2010 1:21 pm
Location: Norah Head, Central Coast
Car: 2007 Liberty GT-B Wagon
Real name: Adam
Profile URL: viewtopic.php?f=10&t=21072

Re: New Member - MY08 2.5T Spec B Wagon

Postby GREIDY » Wed Apr 15, 2015 5:18 pm

thanks heaps for your input guys...

it's definitely not CV's as i've been through a few over those over the years thanks to the boots splitting...
Car has religiously been serviced by Subaru and i have been advised that this issue is inherent with the Bilstein setup by a number of Subaru staff...
I'm confident what i'm told is true given that i've not been charged for the tightening & lubrication @ each & every service...

i will reply with a more clear diagnosis in the next few days as it may well be my description or explanation that is lacking...
GREIDY
 
Posts: 13
Joined: Tue Apr 14, 2015 1:41 pm
Location: Sydney
Car: MY08 Liberty GT-B Spec Wagon
Real name: Glenn

Re: New Member - MY08 2.5T Spec B Wagon

Postby BillyCorgi » Mon Apr 20, 2015 9:21 am

CV joints go clack clack clack.

After having done a centre diff in Junior's MY09 2.5i wagon, the centre diff is a much more savage knock-knock.
It will even give loud "knock" when driving straight ahead caused when the front and rear wheels over-run each other.

If it does it when cold, then CVs most probably.
The centre diff gets worse with heat, that is it will knock when hot.
If it is good when cold and gets bad when hot, centre diff.
If it does it in both directions (left-right) and also in both other directions (forward-reverse) I would get ready for a centre diff.

Junior's took me 8 hours to change out in our garage.
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1835
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx


Return to Introductions

Who is online

Users browsing this forum: No registered users and 0 guests