fitting spec b pedals

[Phoenixx]

Hey all.
Was wondering if anyone had any ideas on hot to get spec b metal pedals to go on properly. They are a rubber back and slide on from the bottom but they have a rubber lip at the top that is supposed to clip over the top of the pedal so they don't slide back down and I cant get it to go over the top of the pedal. I know its a little thing but I can feel a small amount of give when I push the brake pedal and its annoying me.
I've got a picture of the lip I am talking about and I will put it up asap.
Thanks

[Phoenixx]

The lip is the bit at the right

[DownUnder]

Bit of soap or some other kind of lube and they should slip over. If that doesn't work, use a screwdriver.

[HardwareBoB]

Bit of soap or some other kind of lube and they should slip over. If that doesn't work, use a screwdriver.

Or even better, a plastic trim remover or similar so you don't gouge it!

[Brunsy3.0]

Yeah def a pain to fit. I used plastic trim remover after failing for a while. Was still a pain

[gen3v8]

KY Gel

[DownUnder]

They're rubber. I've never damaged them and I've done it multiple times with a screwdriver