Dash Rattle Stopper - 3D Printed

[kikxz]

Definitely!! Thanks Tom for an extra smooth Group Buy - it didn't even feel like a group buy it went that smooth

I would also like to congratulate Tom on an amazing group buy and how well it has been handled, definitely deserves a pat on the back

[tom_kauf]

Thanks guys

[codylibertysti241]

Thanks guys

Have you had a chance to post yet tom?

[tom_kauf]

Thanks guys

Have you had a chance to post yet tom?

Hi everyone,
Sorry for the slow update. Because of work and family events for Christmas I've actually had even less time lately to be on the forum.

Yes, they have been sent . Below is a quick pic I took before they were sent. They're in bubble wrap in a normal envelope, since I already had lots of envelopes (vs them loose in a padded envelope). I didn't make it before the post office closed by the end of the week of my last post, but they are on their way.

I've really noticed how slow all the mail has been around Christmas. So anyone who gave me an address after a certain period, I've gone with the latter address to avoid it arriving too late. So for anyone like BigBCalais, maybe temporarily wedge something between the dash and glass for the 8h drive - lol sorry I didn't want it going missing if you were already gone from your old address.

Everyone paid except chatterz. So if everyone receives theirs in good condition, I might re-open the GB for the remaining 2 Rattler Stoppers.

[BigBCalais]

It won't be the end of the world Tom, I'll just turn the stereo up

[kikxz]

Just received mine today Thanks for that fellas.

Now just need to push on through the work day until home time to shove these in the dash

Arrived home and thrown it in *bad idea to do it when the dash is extra hot* i used the 2nd smallest where the drivers side wiper sits on the passenger side and it works a treat!!!! Best idea

[bigBADbenny]

W T THANKS!!!

[bigBADbenny]

Word to the wise:
Loop a thread through the hole in the stopper before you attempt inserting it, so the stopper can be retrieved from the defrost vent it's fallen into
Also handle the stoppers with extreme care: one cracked in my hand and another cracked in the gap, the third disappeared into the vent: from which a fourth was saved
A chopstick with a wee blob of blutack might come in handy too


I have tons of 6mm black foam core if anyone needs spare stoppers

[Jiyujin]

Hey Tom,

I received the package today, many thanks for organizing it all.

All the best for the new year.
Al

[codylibertysti241]

Can someone do a photo bomb of the install location/s please so I don't fuck this up lol

[tom_kauf]

Good to hear they're finally arriving.

I still haven't had time to fit mine, but once I do I'll post a pic. I also had the idea of putting some string on it (just like BBB). They're definitely smaller than I imagined, but that's good - less visible, even if it makes it harder to fit.

Happy new year to everyone too.

[kikxz]

This is where i put mine it was the second smallest both flat ends on the dash and window.
I place it where the tip of the driver side wiper sits, which is roughly aroun 8-10 inches from the passenger side pillar





HOPE EVERYONE HAS A GREAT NEW YEARS SQUEAK FREE

[codylibertysti241]

This is where i put mine it was the second smallest both flat ends on the dash and window.
I place it where the tip of the driver side wiper sits, which is roughly aroun 8-10 inches from the passenger side pillar





HOPE EVERYONE HAS A GREAT NEW YEARS SQUEAK FREE

Thanks mate

[Manaz]

Rattles in my car are driving me nuts - if there's a spare set of these about, I'll take one plz

[tom_kauf]

Rattles in my car are driving me nuts - if there's a spare set of these about, I'll take one plz

No full sets left unfortunately. But each set contains 5 sizes. So if anyone has fitted theirs and has some left over to help Manaz out, I'm sure he'd be very appreciative.
Alternatively, the US suppliers can always make more. I think $5ea for the set plus postage should come to less than $15 (since postage for all 30 sets was only $13US).