Invidia Q300

by **codylibertysti241** » Sat Jun 14, 2014 7:29 pm

Righto I'll shoot em an email.
Any others anyone can recommend? I want the high flow still but as I quiet as I can get it

by **codylibertysti241** » Fri Jun 20, 2014 7:13 pm

Sorry Kido, yeah it's stock tune atm but PITS are doing the tune for me shortly. It is running a bit fat at the moment, do you think the tune will make a difference?

by **key** » Tue Jul 01, 2014 11:29 pm

Are you happy with the performance and fitment overall thought? I'm looking into an Invidia TBE for my lib

by **alexxxz** » Wed Jul 02, 2014 7:16 am

key wrote:Are you happy with the performance and fitment overall thought? I'm looking into an Invidia TBE for my lib

mine is being fitted on Friday so I can let you know

by **key** » Wed Jul 02, 2014 7:26 am

alexxxz wrote:
key wrote:Are you happy with the performance and fitment overall thought? I'm looking into an Invidia TBE for my lib

mine is being fitted on Friday so I can let you know

Yea that would be great! Are u getting a complete invidia TBE? And where did u get it from? I've found one on eBay that I'm watching, need to save up some money before I start calling places

by **lump_a_charcoal** » Wed Jul 02, 2014 7:32 am

I got mine from LSD motorsports in the US, very good service and a great price.

by **shav** » Wed Jul 02, 2014 9:55 am

Well its been a month and a half since my Invidia aus spec dump was fitted. Just a recap, I have an auto post FL dump and there were reports of the dump's cat touching the side of the gearbox. Fitting was a PITA yes, but with patience and persuasion the dump did clear with mm's to spare. Overall, I cannot report any issues with it heating up the trans, knocking it or causing melting issues under the car. So far so good. The concern is if the additional heat is affecting the transmission in some way looking ahead, so I will consider running an external trans cooler for some added insurance.

by **alexxxz** » Wed Jul 02, 2014 12:14 pm

key wrote:
alexxxz wrote:
key wrote:Are you happy with the performance and fitment overall thought? I'm looking into an Invidia TBE for my lib

mine is being fitted on Friday so I can let you know

Yea that would be great! Are u getting a complete invidia TBE? And where did u get it from? I've found one on eBay that I'm watching, need to save up some money before I start calling places

Yes the complete invidia TBE from Troy at PSR. Apparently the new stock in is quieter (which is draw card for me)

by **lump_a_charcoal** » Wed Jul 02, 2014 1:26 pm

key wrote:
alexxxz wrote:
key wrote:Are you happy with the performance and fitment overall thought? I'm looking into an Invidia TBE for my lib

mine is being fitted on Friday so I can let you know

Yea that would be great! Are u getting a complete invidia TBE? And where did u get it from? I've found one on eBay that I'm watching, need to save up some money before I start calling places

http://www.lsdmotorsports.com/

Seriously, they were $1200 cheaper than buying from Aus!

by **key** » Wed Jul 02, 2014 1:36 pm

Awesome! Would love to hear ur thoughts once it's all fitted.

Thanks for the link lump_a_charcoal just had a look. Does their system include the dump pipe? Just from the picture it looks like a cat back system?

by **lump_a_charcoal** » Wed Jul 02, 2014 2:24 pm

key wrote:Awesome! Would love to hear ur thoughts once it's all fitted.

Thanks for the link lump_a_charcoal just had a look. Does their system include the dump pipe? Just from the picture it looks like a cat back system?

I bought the Q300 and the dump pipe together.
A Q300 is just the cat back.

by **codylibertysti241** » Wed Jul 02, 2014 6:29 pm

key wrote:Are you happy with the performance and fitment overall thought? I'm looking into an Invidia TBE for my lib

To answer your question, no the dump pipe was a fail. cat back was fine fit pretty well, but i had to modify the dump pipe. the angle of the bends was not acute enough and the first horizontal section after the drop was not long enough. i bought a 90 degree mandel, cut it perfectly in half and then cut and chopped the rest of it to make it work. i have photos if you'd like to see them

by **lump_a_charcoal** » Wed Jul 02, 2014 8:13 pm

codylibertysti241 wrote:
key wrote:Are you happy with the performance and fitment overall thought? I'm looking into an Invidia TBE for my lib

To answer your question, no the dump pipe was a fail. cat back was fine fit pretty well, but i had to modify the dump pipe. the angle of the bends was not acute enough and the first horizontal section after the drop was not long enough. i bought a 90 degree mandel, cut it perfectly in half and then cut and chopped the rest of it to make it work. i have photos if you'd like to see them

Please note that my exhaust is on a manual Gen V also.
I have no idea if it fits well on anything else, merely recommending a supplier.

by **key** » Wed Jul 02, 2014 8:17 pm

codylibertysti241 wrote:
key wrote:Are you happy with the performance and fitment overall thought? I'm looking into an Invidia TBE for my lib

To answer your question, no the dump pipe was a fail. cat back was fine fit pretty well, but i had to modify the dump pipe. the angle of the bends was not acute enough and the first horizontal section after the drop was not long enough. i bought a 90 degree mandel, cut it perfectly in half and then cut and chopped the rest of it to make it work. i have photos if you'd like to see them

Yea a couple of photos would be great! And was the dump pipe u fitted the "Aus" spec one?

by **codylibertysti241** » Thu Jul 03, 2014 5:50 pm

Yea a couple of photos would be great! And was the dump pipe u fitted the "Aus" spec one?[/quote]

Yep, bought it from PSR last october along with the Q300

Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Re: Invidia Q300

Who is online