Trying to source an X-force centre and Y pipe

[julianhaami]

Extractors arrived today, to go with it im trying to source an X-force Center Y pipe, which are seemingly scarce online.

Can anyone point me in the right direction? I originally looked at bestmufflers a while ago but no longer see it on their site.

Best i can find locally (Gold Coast) through an X-force recommended dealer is $320 delivered, plus fitting of it and the extractors a steep $750+. Cheers in advance.

[SamD]

I'm in similar boat, Bestmufflers was the cheapest but no longer listed on their site. I have called them and say they can still supply but are awaiting stock to arrive, but this has been the story for the last couple of months!

Am reconsidering X-force center and Y-pipe anyhow, there is unlikely to be any performance gain and the smaller resonator will probably just cause drone particularly if you get high flow cats and delete 3rd cat.

$750 for fitting of y-pipe and extractors sounds expensive! I'm in Brisbane and going to look for someone here to do the work.

[Shakibsaifi]

google is your friend

http://www.mrtperformance.com.au/product-detail?part_number=SULNE232Y&barcode=&brand=MRT&clear_mm=yes

[julianhaami]

Thanks dude, already found that one. The MRT was 3" though, X-force i thought was 2.25"? Rather not go large and havent seen any feedback on the MRT setup.

[jongyrocka]

any love in finding them yet?

[SH30RB]

the 3.0R/B exhausts are different to 2.5/GT exhausts. You have to buy one specific for our cars.

You are correct in the XForce system being 2.25"

Also, stay away from MRT, they don't know what they are on about.

$320 delivered is a pretty good price for the center and y pipe

The fitting of the raptor headers and the xforce system definitely isn't worth $750. Yes there is a bit of custom work to fit the headers but the xforce system is a simple bolt on system you can do yourself

I would be getting another quote from somewhere else to see what price they can give you to fit up the headers mate

[julianhaami]

No love yet, out of the country for a month and eager to get it sorted.

I ruled out the MRT pipe based on the size, will try hunt down an X-force Center Y when i get back. I might end up copping the $320 but find another mob to fit the extractors.

[Shakibsaifi]

any luck?

Bestmufflers are selling 2.25 inch mids again

[Brunsy3.0]

Bestmufflers are selling 2.25 inch mids again

I noticed this just yesterday and think I may be on the blower to them for their best shipped price. I swear their price has gone up

[Shakibsaifi]

High demand.