MY 05 liberty gt boost gauge

[Jap_spec]

Hi guys I need your advice!

Iv got an electric boost gauge, I know where to connect the vacuum etc.
but I would like to know if I can get a ignition power near the drivers side pillar area.
Also the boost gauge come with the sensor unit and it needs power/ground as well!
Is that ok to get a power for the sensor and boost gauge from the same spot?

Thanks

Ken

[bigBADbenny]

Best bet is to use a fuse tap from Selbys in ign2 fuse in the cabin fusebox

What boost gauge is it?

[Jap_spec]

Best bet is to use a fuse tap from Selbys in ign2 fuse in the cabin fusebox

What boost gauge is it?

Thanks for the reply!
10a fuse tap? And I bought a apexi style boost gauge.
It was cheap and looks good, if it works I wouldn't complain haha

[cvas]

I recently installed mine. I tapped into the head unit power and it works fine. I posted about it here

viewtopic.php?f=10&t=26200