4GEN Liberty and Legacy 3.0 Exhaust headers

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby Johnus141_ » Mon May 26, 2014 9:59 am

Hi Tim, got recommended by Matt, and I'm interested in ordering a set of headers from you.
Johnus141_
 
Posts: 1
Joined: Mon May 26, 2014 9:54 am
Car: Liberty 3.0R spec B

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby Tradewind » Mon May 26, 2014 1:04 pm

Johnus141_ wrote:Hi Tim, got recommended by Matt, and I'm interested in ordering a set of headers from you.


Johnus

email me at raptorsc@westnet.com.au with you name and address

Cheers
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby Enigma » Tue May 27, 2014 12:33 am

Tradewind wrote:Customer results

Freakin good results!!


It feels freakin' good to drive too!

The above graph is from my car - all runs with the headers, custom stainless exhaust (2x 100cel cats, small centre resonator and rear stainless mufflers) and HKS panel filter in standard airbox.

Noise is amazing, power up high is much better too. I had the headers and tune done on the same day, and it's a different car to drive now. Revs higher and harder, much smoother powerband too.

I highly reccommend these headers to anyone with a H6!
--------------
Daniel
2008 Spec B H6 6MT wagon - 148awkw

Tein S-Techs, 18x8.5 Gravels, Raptor headers with full custom stainless exhaust, EcuTek remap, HKS panel filter, front lip, honeycomb grille + more
http://forum.liberty.asn.au/viewtopic.php?f=10&t=25863
User avatar
Enigma
 
Posts: 93
Joined: Wed Feb 11, 2009 12:44 pm
Location: Adelaide
Car: MY09 3.0 Spec B wagon 6MT
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=25863

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby 666 » Tue May 27, 2014 5:16 pm

Nice results on that graph Daniel. How's the sound with that exhaust setup, any drone or angry bee sound to it? Did S+J do much to the tune to arrive at those figures? They do rev much harder and faster with the headers fitted, first four gears go by in a flash.

Rob
666
 
Posts: 122
Joined: Sat May 28, 2011 10:21 am
Car: Spec.B
Real name: Rob

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby Enigma » Wed May 28, 2014 2:44 pm

666 wrote:Nice results on that graph Daniel. How's the sound with that exhaust setup, any drone or angry bee sound to it? Did S+J do much to the tune to arrive at those figures? They do rev much harder and faster with the headers fitted, first four gears go by in a flash.

Rob

Sound is great! Since header install I haven't had any issue with drone - given my setup with 100cel cats + the mufflers I run it's pretty loud, but I like it.

Sean didn't have to do anything out of the ordinary with the tune to my knowledge - it already had a basic S+J EcuTek tune from the previous owner. To be honest I didn't ask what was changed exactly - spent over an hour on the dyno, multiple runs to get it right across the range. I trust Sean to keep it safe while still getting me the power and drivability. Surprisingly it's not too bad on fuel either - in S# and enjoying the new power and exhaust note regularly, it's in the low 13s and that average includes the dyno runs too (filled tank with BP98 the day before and reset it then). Very happy!
--------------
Daniel
2008 Spec B H6 6MT wagon - 148awkw

Tein S-Techs, 18x8.5 Gravels, Raptor headers with full custom stainless exhaust, EcuTek remap, HKS panel filter, front lip, honeycomb grille + more
http://forum.liberty.asn.au/viewtopic.php?f=10&t=25863
User avatar
Enigma
 
Posts: 93
Joined: Wed Feb 11, 2009 12:44 pm
Location: Adelaide
Car: MY09 3.0 Spec B wagon 6MT
Real name: Daniel
Profile URL: viewtopic.php?f=10&t=25863

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby J0HNATH0N » Fri May 30, 2014 12:08 am

Had mine installed with 2012 wrx widebody quads (also have xforce centre and y pipe and 2-1/4 cats). The car is quiet below 2500rpm and then it opens up to an awesome growl. Not to loud but very sporty and agressive no done either. Very pleased. Looking forward to a tune from Matt when he is in WA
User avatar
J0HNATH0N
 
Posts: 178
Joined: Sun Jun 17, 2012 1:08 am
Location: Western Australia
Car: MY06 3.0RB
Real name: Johnathon
Profile URL: viewtopic.php?f=10&t=19423

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby nhimsta » Fri May 30, 2014 8:13 pm

Just got mine..... refined by Matt ...Wow is all I can say ...
Thanks again Matt
Drone gone
Fuel economy awesome
Power more awesome
Sounds sweet
MY 06 spec B ----- sold
New Ride: MY 07 XT Forester Luxury
Toque Performance Tuned
User avatar
nhimsta
 
Posts: 101
Joined: Fri Sep 27, 2013 10:41 am
Location: Adelaide
Car: MY06 3.0R b-spec

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby Tradewind » Fri May 30, 2014 9:13 pm

nhimsta wrote:Just got mine..... refined by Matt ...Wow is all I can say ...
Thanks again Matt
Drone gone
Fuel economy awesome
Power more awesome
Sounds sweet


Awesome

Matt gets them flyin -

Great to hear the feedback - more power to everyone
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby nhimsta » Sat May 31, 2014 10:06 am

Ohh btw Tim thanks for the sticker :D
It's sitting nicely on my rear window for all to see....um if there quick enough to see it LoL...
MY 06 spec B ----- sold
New Ride: MY 07 XT Forester Luxury
Toque Performance Tuned
User avatar
nhimsta
 
Posts: 101
Joined: Fri Sep 27, 2013 10:41 am
Location: Adelaide
Car: MY06 3.0R b-spec

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby deadlylyric » Wed Jun 04, 2014 2:20 am

hey tim

Just throwed u an email, you can reply or just pm me if more info is needed but am definitely interested at this price asap :)
deadlylyric
 
Posts: 35
Joined: Sun Apr 27, 2014 5:38 pm
Location: Melbourne
Real name: calvin

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby TheMightyGonzo » Wed Jun 04, 2014 3:36 pm

Email sent, Let me know if you need any more of my info. Definitely keen to get some of these headers installed before I get my car tuned. :D
User avatar
TheMightyGonzo
 
Posts: 85
Joined: Thu May 22, 2014 3:33 pm
Location: Melbourne, Victoria
Car: MY06 3.0R Spec B Wagon
Real name: Nick

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby Tradewind » Fri Jun 06, 2014 9:31 am

I think I have got all the orders on the list .......
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby TheMightyGonzo » Fri Jun 06, 2014 12:11 pm

Tradewind wrote:I think I have got all the orders on the list .......


Spoke to you last night, I'm all sorted. :D
User avatar
TheMightyGonzo
 
Posts: 85
Joined: Thu May 22, 2014 3:33 pm
Location: Melbourne, Victoria
Car: MY06 3.0R Spec B Wagon
Real name: Nick

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby deadlylyric » Fri Jun 06, 2014 4:59 pm

Tradewind wrote:I think I have got all the orders on the list .......


hey tim have u got my email? ill resend it anyway with more specifics :))

Cheers
Calvin
deadlylyric
 
Posts: 35
Joined: Sun Apr 27, 2014 5:38 pm
Location: Melbourne
Real name: calvin

Re: Subaru Liberty and Legacy 3.0 Exhaust headers

Postby Tradewind » Fri Jun 06, 2014 5:06 pm

deadlylyric wrote:
Tradewind wrote:I think I have got all the orders on the list .......


hey tim have u got my email? ill resend it anyway with more specifics :))

Cheers
Calvin


Calvin

Recieved and reply now sent
2015 Liberty 3.6R (6GEN) - Raptor headers and Raptor SUPER MAF
Tradewind
 
Posts: 2040
Joined: Tue Mar 15, 2011 3:00 pm
Location: Gordonvale Qld
Car: Grey MY15 6GEN 3.6R - Raptor MAF
Real name: Tim

PreviousNext

Return to Raptor Superchargers

Who is online

Users browsing this forum: No registered users and 0 guests