3.6R Engine Flush/decarbonize needed?

Posts specific to the 3.0 litre NA H6 engine

3.6R Engine Flush/decarbonize needed?

Postby skyva » Fri May 23, 2014 10:44 am

Hi, I have clocked up 90k on a 2010 outback 3.6R, serviced regularly, owned since new.

Last service, the dealership wanted to do a flush of the engine with a cleaner to remove carbon buildup. There were no signs of any issues, it was suggested as a precautionary measure.

I have regularly used the fuel additive supplied after each service to keep the engine clean. I generally only use regular 91ron fuel.


Is this flush necessary on the 3.6R? Is there anything I should look for?

Thanks.
skyva
 
Posts: 26
Joined: Thu Jan 21, 2010 7:09 pm
Location: SE melbourne
Car: Subaru Outback 3.6R premium 2010

Re: 3.6R Engine Flush/decarbonize needed?

Postby sheppo9 » Fri May 23, 2014 4:22 pm

Do they/you use upper cylinder cleaner (#SA459) in it?

You might aswell put E10 in it, that's usually cheaper than 'regular' petrol too.
User avatar
sheppo9
 
Posts: 552
Joined: Mon Aug 25, 2008 12:44 pm
Location: ACT
Car: An Outback
Real name: Luke

Re: 3.6R Engine Flush/decarbonize needed?

Postby Egg » Thu May 29, 2014 2:56 pm

I just had my car serviced last week, i thought do the upper cleaner as a precaution anyway, couldnt hurt. I havent done it since i bought the car. I hope it helps. Mines a 3.0 motor but same thing.
User avatar
Egg
 
Posts: 317
Joined: Thu Jan 24, 2008 4:27 pm
Location: Melb
Car: MY07 Spec B Wagon Pearl white
Real name: Ivan

Re: 3.6R Engine Flush/decarbonize needed?

Postby Deep Heat » Thu May 29, 2014 3:13 pm

When you say flush do you mean a oil flush or upper engine clean?

Upper engine cleaner is worth it, oil flush I wouldn't bother with.
Jack_Keaka wrote: I like my women like subarus, box explodes and does a head easily.
Deep Heat
formerly Twinkle
 
Posts: 1403
Joined: Mon Sep 09, 2013 10:01 pm
Location: Kellyville, NSW


Return to 3.0R & 3.6R engine specific

Who is online

Users browsing this forum: No registered users and 3 guests