Jolting Issues After Service?!

[Glexen]

Thanks for all the feedback! Its back at the service centre today. Gave them a full written report from my end that also states about the BOV and the reader which has pretty much no relevance to what's going on. I even put the stock BOV just so they don't make any more nonsense. So have to wait and see if they fix it appropriately

[Glexen]

Turns out they fixed it, was two faulty spark plugs. But now another problem rises. My speedo now has a couple seconds delay from when you start from 0 Kph. Never ending problems with this service. I'm guessing they were tampering with other functions of the car before they resorted testing the spark plugs. Anyone have this issues or know what would have caused my speedo to have a lag/delay before it works. Its only does this when you come to a full stop, otherwise works fine.

[HyRax]

I think you'll find that was always there. The speedo has difficulty showing anything slower than 5-7kph (and it's not like you really need precision representation of that speed, do you?).

[alexeiwoody]

Would you be able to post up a video of this happening? It doesn't sound too far off normal speedo behavior

[Glexen]

Yeah fair enough, it's just I know it didn't do it before the repair they just did, it's not like it's not picking up the low speed, I'll accelerate fast to say 40kph, it will pretty much be paused the whole time for 3 seconds then shoot up to my current speed. I'll try get video of it.

[Newbie GT]

Reset ecu

[BUDDAH]

Reset ecu

Buy a Jeep

[gen3v8]

Reset ecu

Buy a Jeep

At least then you wont have jolting issues

[<GB>]

Pretty sure that's standard ! See now u had a mishap you're more observant and thinking everything's a problem this is common after having a bad experience

[Glexen]

Yeah i did a ECU reset, Just seems abnormally long time to respond, Oh well. At least there is no performance lose and the main issue got resolved