H6 Oil capacity

Posts specific to the 3.0 litre NA H6 engine

H6 Oil capacity

Postby Flat6Estate » Thu Feb 13, 2014 5:46 pm

So, the owners manual confirms what the gods of Google told me.
The H6 engine holds 5.5 litres of oil.

So on the weekend I went to supercheap auto and purchased a 6 litre bottle of Penrite Everyday 10w-40 full synthetic oil and a filter.
Went home, drained the oil, did the sump plug back up, changed the filter and proceeded to pour in the new oil.
I stopped pouring at 5.5litres, waited a couple of minutes and checked the dip stick. It was on the low mark.
I poured the remaining 0.5 litre in. After waiting, the dip stick was halfway between low and high.

Now that I have a full 6 litres of oil in the car, I don't want to put too much more in, but think I should.

Is it normal for this engine to want more than specified in the manual?
And yes I have checked, there are no leaks. Everything is tight.
MY08 Spec B 3.0L Manual Wagon
1998 Yamaha YZF600R Thundercat - a bit broken :-o
User avatar
Flat6Estate
formerly Timbo_rs2500
 
Posts: 377
Joined: Mon Jun 17, 2013 2:15 pm
Location: Lower Blue Mountains NSW
Car: 2007 MY08 Liberty Wagon 3RB 6spd
Real name: Tim
Profile URL: viewtopic.php?f=10&t=32189&p=425885#p425885

Re: H6 Oil capacity

Postby BillyCorgi » Thu Feb 13, 2014 9:21 pm

I did mine on Australia Day weekend.
Similar Story.
In went 5.5 litres and it was halfway between the two dots or two holes.
Put in the half litre up to 6 litres and it just popped over the top of the full dot.
Such is life?
Get your Short Shift Adaptor viewtopic.php?f=68&t=30525
Get your Gear Shift Rejuvenation Kit viewtopic.php?f=68&t=31240
Get your Centre Differential Rebuild viewtopic.php?f=6&t=31089
Want a custom built Brake Cylinder Stopper? viewtopic.php?f=6&t=31321
Need to hire a Guard Rolling Machine? viewtopic.php?f=6&t=31899
Get your BillyCorgi's "Not-4-Wimps" Chilli Sauce
User avatar
BillyCorgi
 
Posts: 1836
Joined: Tue Aug 20, 2013 10:11 pm
Location: Bankstown Area, Sydney
Car: Liberty 3.0R-B Wagon E85 Flex Fuel
Real name: Peter
Profile URL: www.facebook.com/CorgiWerx

Re: H6 Oil capacity

Postby Flat6Estate » Fri Feb 14, 2014 6:25 am

Well I'm halfway between the 2 marks and i already have 6 litres in. So to fill it I reckon i need another half a litre.
This would make 6.5 litres.
Hard to believe that your engine and mine have 2 different sized sumps. This is why I asked...
MY08 Spec B 3.0L Manual Wagon
1998 Yamaha YZF600R Thundercat - a bit broken :-o
User avatar
Flat6Estate
formerly Timbo_rs2500
 
Posts: 377
Joined: Mon Jun 17, 2013 2:15 pm
Location: Lower Blue Mountains NSW
Car: 2007 MY08 Liberty Wagon 3RB 6spd
Real name: Tim
Profile URL: viewtopic.php?f=10&t=32189&p=425885#p425885

Re: H6 Oil capacity

Postby Robbks » Fri Feb 14, 2014 8:31 am

read your owners manual on the proper procedure for checking oil level.

Which involves warming the engine and letting it sit for a prescribed amount of time.
Remember how things (especially liquids) expand when they get hot..... :wink: :wink:
coyote wrote:Sure, a GTR is fast ... but it's about as interesting as listening to grass grow.
User avatar
Robbks
 
Posts: 2185
Joined: Wed Jan 05, 2011 8:21 am
Location: Hobart, Tas
Car: MY06 3.0RB Wagon
Real name: Rob
Profile URL: viewtopic.php?f=10&t=12350

Re: H6 Oil capacity

Postby alessandro132 » Fri Feb 14, 2014 8:53 am

Sump capacity for the H6 is 6.5L
TEAM TOYOTA | TEAM HKS

Cusco, HPI, HKS, and a few other bits...
User avatar
alessandro132
-stickered-
 
Posts: 2380
Joined: Wed Mar 21, 2012 8:40 am
Location: Sydney
Car: 2000 JZX100 Toyota Chaser Tourer V
Real name: Al
Profile URL: viewtopic.php?f=10&t=16914


Return to 3.0R & 3.6R engine specific

Who is online

Users browsing this forum: No registered users and 9 guests