Help!!! 5 Gen GT sedan had problems

[Leo]

Hi,
Just come back from M5,while driving I had a few problems showing on my dash.
Engine light on
Electronic brake light on
Dynamic control light on
Cruise control light flashing
SI drive (S) flashing
Has anyone ever encounter similar problems before, any advise what should I do

When I got home I stop the car n start again light still come back on.

[satogixxer]

Sounds like your car has thrown a CEL/MIL for some reason.

You should try to read the error code with an OBD adapter to see what the cause could be (and clear the code if necessary). Do you have one handy?

[bigBADbenny]

site:forum.liberty.asn.au CEL


Pop that search term into google.
Find someone with a tactrix, ECU datascan or torque app, or your mechanic or dealer and get that cel read.

[Leo]

Sounds like your car has thrown a CEL/MIL for some reason.

You should try to read the error code with an OBD adapter to see what the cause could be (and clear the code if necessary). Do you have one handy?

I just bought the car less than a month, should I contact the car dealer as it still have warrantee,

I was thinking of getting a OBD adaptor but don't know which one to get, do you know which adapter will work.

[satogixxer]

Sounds like your car has thrown a CEL/MIL for some reason.

You should try to read the error code with an OBD adapter to see what the cause could be (and clear the code if necessary). Do you have one handy?

I just bought the car less than a month, should I contact the car dealer as it still have warrantee,

I was thinking of getting a OBD adaptor but don't know which one to get, do you know which adapter will work.

Yep the dealer should be able to read the code for you - probably your best bet for the moment since you said you still have warranty too.

[Leo]

I didn't buy the car from Subaru dealer, I bought from Sydney motor group which they selling Nissan and Renault,

Can I still drive the car for a few days or have to take it check.

[satogixxer]

Any Subaru dealer should be able to read the code for you if the dealer you bought from can't.

[bigBADbenny]

If you have android then torque app and obdII adapter like this:

http://m.ebay.com.au/itm/271240079734


Super Mini ELM327 V1.5 Bluetooth OBD2 OBDII Car Auto Scanner Android Torque Pro

[Leo]

If you have android then torque app and obdII adapter like this:

http://m.ebay.com.au/itm/271240079734


Super Mini ELM327 V1.5 Bluetooth OBD2 OBDII Car Auto Scanner Android Torque Pro

I am using iPhone. Is the app still call torque pro.

[bigBADbenny]

iPhone if rooted or...
Wifi obdII, iPhone and dash command or something similar

[Leo]

iPhone if rooted or...
Wifi obdII, iPhone and dash command or something similar

Sorry guy, I am new to this stuff, you may need to explain little bit more for me, I am going to buy a -automotive/elm327-super-mini-bluetooth-obd2-diagnostic-car-scanner tomorrow, hopefully that I be able to read and clear the code.

[bigBADbenny]

Yeah if you have an android to connect it to, and run the app torque pro or similar.
If not, some obdII app and a wifi obdII adapter with your iphone...

Why not get In touch with a local member if the learning curve is too steep right now?

[Leo]

I undo the battery today and the lighs are all off now back to normal, let see if i take it for a drive if it come back again.

[Leo]

Just come back from drive to blacktown and no light pop up good sign. Don't know why it happen last night.

Jut bought a OBD2 adaptor with wifi connection.
What software would a need as there are a few out there, someone on these forum would have uses it before and could recommend to get as I don't want to purchase the software and find out no good to use.
'

[KiDo_Tuning]

You have an exhaust fitted?
If so, likely code is P0420

What were you doing when the light came on?