Member Profile - Bezzza

[bigBADbenny]

Just look at the depth of the center crater!

[kiahatsiu]

Rpf01s are my favorite wheels.

[Bezzza]

Just look at the depth of the center crater!

35 offset It is deep!!!

Was a little nervous about biting the bullet and purchasing, but now I have them think they are gonna look alright fingers crossed.

[Brunsy3.0]

what tread you gonna run on them?

[Bezzza]

Will just be swapping what I have now, 225/40.
They are near new really and wheels have stolen all my money!
Next set will be 235/40 for sure though

[Bezzza]

Well got the wheels put on today, thanks to the boys at Wheels World
Car looks a ton more aggressive then with the STi rims!!! 1/2 inch and an extra 20mm of offset is a HUGE difference
Running around 1 degree of camber on every corner and don't foresee a problem with rubbing.
I am in the market for coilovers amongst other mods so may need to run slightly more if heading down this path.

RPF1 centre caps should be here in a few weeks and will decide if I like them or not or to try source some flat style to suit.

Also opinions on lug nuts please. I am thinking some longer blue to match the valve stems are definitly needed. The little STi ones are getting a bit lost in the dish of offset IMO.

[Brunsy3.0]

Nice and flush. Looks awesome

[Bezzza]

I am well and truly infected by the mod bug this month!!!

Invidia Aus Spec dump pipe ordered from prospeed racing this morning. From all accounts he says they are fitting up perfect with no issues. I most likely will get a splitter welded into the mouth as they are only bellmouth for the auto.

Will also be on the hunt for a TMIC to compliment and keep the temps down a little.

Also ordering a tactrix cable early next week for logging purposes and re-flashing of tunes. A LOT of reading I need to do to find how this all works and what programs are best :p

Any input/advice is always welcome as to how to go about it all.

Ian

[bigBADbenny]

Link in my sig

[Bezzza]

Link in my sig

Cheers Benny have had a good read and sounds like I'm pretty set. Will definitely look into a nice compact boost gauge to keep a real time check on things and an AFR too down the track.

Dump pipe came yesterday, looks like a really nice piece with quality welds. Going to get Mettams to fit as I will need a reducer welded in to match the fujitsubo centre pipe (3"-2.5").
Question: Should I get a diverter welded in also while I have the chance?

[bigBADbenny]

The diverter question rages, but the effect is probably unnoticeable at this power level.
Unless your zorst ppl are expert in the matter as pertains to VFs... I'd give it a miss...

[shav]

That's the dump I wanna get. Let us know how you go with it bezza post fit and tune.

[Bezzza]

Can always get the diverter if needs be down the track. Funds are tight enough as is haha!

That's the dump I wanna get. Let us know how you go with it bezza post fit and tune.

Will do mate, hopefully it fits up all good with clearance and all that as promised!!!

[Maj3sticCr0w]

oooooo shiny!

[Bezzza]

Car went in for some surgery today


Invidia Dump Pipe on without too much hassle.
Just had a slight trouble with the cat fitting against the transmission, and needed to increase the turbo flange holes ever so slightly.
Also had a flex joint welded in to make things a touch nicer on the system.
Very happy with the job

Fingers crossed new intercooler will arrive tomorrow and will put that on this weekend.
Then a tune revision and happy days til the turbo packs in haha!