Fitting a Headlight Washer Cap?

[michaelfinger]

How is a headlight washer cap fitted? I bought a new cap and there is no obvious way to fit it.

This is the inside of the cap;

DSC_0139.jpg (202.85 KiB) Viewed 1534 times

This is the existing part on the car;

DSC_0137.jpg (208.97 KiB) Viewed 1534 times

It appears there is something missing...

Can anyone advise what to do?

Thanks,

Michael.

[zch91]

Looks like there's a clip that you are missing..

http://opposedforces.com/parts/legacy/e ... mp_washer/

Best thing to do once you've got it sorted is to disable the headlight washers as they are pointless and only cause headaches as you are aware of...

[studbag]

Yep, you're missing a clip. Don't bother going to Subaru for it though - they don't sell them separately and you have to buy the entire washer assembly to get it which is $200 per headlight.

I'm in the same situation. I'm just going to glue them on and disable the washers.

[michaelfinger]

Okay. Good info so far... How are the washers disabled?

[studbag]

As to how to disable them, I'm not sure yet. I'll post up here if I find out, if you find out can you post up too?