Springs, shock absorbers, swaybars,
Brakes, Wheels and Tyres
by legacydan » Wed Sep 25, 2013 2:28 am
Hi guys im looking to rebuild a set of Tokico front calipers i have lying around, i have the pistons out but i damaged them slightly taking them out and they have a lot of corriosion so best to replace them. I measured them at approx 42mm in diameter and 48mm in overall height. Does anybody know where i could buy some new ones online? I havent been able to find them yet anywheere
Thanks
Dan
-

legacydan
-
- Posts: 504
- Joined: Tue May 18, 2010 9:48 am
- Location: Dublin, Ireland
- Car: Legacy b4 jdm import
- Real name: Dan
by cruisn » Wed Sep 25, 2013 9:24 am
Are they the GT calipers? ie 316mm rotors?
If so, this should be the right part number for the piston 26236PA010.
-

cruisn
-
- Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
by legacydan » Wed Sep 25, 2013 5:22 pm
cruisn wrote:Are they the GT calipers? ie 316mm rotors?
If so, this should be the right part number for the piston 26236PA010.
Yes the GT callipers with the 316mm rotors. I look that part number up. Cheers
-

legacydan
-
- Posts: 504
- Joined: Tue May 18, 2010 9:48 am
- Location: Dublin, Ireland
- Car: Legacy b4 jdm import
- Real name: Dan
by jakey » Wed Sep 25, 2013 5:33 pm
Also I think there is a set going on eBay really cheap at the moment, if you type in subaru liberty they should come up. You may be able to salvage from them.
-Jakey-UBARU
-

jakey
-
- Posts: 1083
- Joined: Sun Jan 29, 2012 12:13 am
- Location: Melbourne
- Car: UBARU - 2005 MY06 3.0R
- Real name: Jake
- Profile URL: viewtopic.php?f=10&t=15489
Return to Suspension, Brakes, Wheels and Tyres.
Who is online
Users browsing this forum: No registered users and 15 guests