H & R Camber Bolts

[-=HaZ=-]

Guys,

I have done some research on the forums and was wondering if anyone has been able to source some H & R Triple C Camber Bolts (Model TC114)? If you go to the suppliers website it doesn't list any distributors in Australia. I had a look on eBay with no luck and can't find someone online who can post them to Australia without them wanting to charge almost $160 Fedex postage for an item that costs less than $50.

I know Eibach offers an alternative but that part only offers +- 1.75 degrees, whereas the H&R part is upto 3.0 degrees.

Also does anyone know if you can use the H&R Triple C bolts for both front and rear struts?

Cheers,

Enver

[sheppo9]

I got mine from some shop in the US (whoever was cheapest at the time - maybe Amazon with the free US shipping) and then I use www.shipito.com to re-send the package to me here.

[3rspecb]

Try Adam at tuspeed.com.au, I have bought various H&R gear through him.

I'm using the Eibach camber bolts in conjuction with the OE camber bolts and my aligner was able to get up to -3degrees each side for the fronts.

Camber bolts for front only.

Whiteline sell KCA399 (Rear Control arm - upper outer bushing (camber correction)) - I have this and my aligner was able to up to get -2degrees each side.