18x10 +25

by **seanography** » Mon Jun 10, 2013 7:51 pm

will 18x10 +25 fit on a 2008 liberty if the guards are rolled and pulled?

Cheers,

Sean

by **zch91** » Mon Jun 10, 2013 7:59 pm

Maybe if you run like 8-10 degrees of camber?

A rough calculation tells me they will poke around 60-70mm more than your stock wheels.

by **jakey** » Mon Jun 10, 2013 8:01 pm

You would definitely need to pull the guards..

Have you got a picture of said wheels?

Here is an example on a rex

http://forums.nasioc.com/forums/showpos ... ostcount=5

by **Caution** » Mon Jun 10, 2013 8:17 pm

by **seanography** » Mon Jun 10, 2013 8:28 pm

the wheels are xxr 521s.

DAMN 8-10 degrees of camber?!?!

: 3831_10151258817126833_1375444301_n.jpg (62.74 KiB) Viewed 1696 times

by **seanography** » Mon Jun 10, 2013 8:29 pm

Caution wrote:

is that the same specs? looks flush!

by **zch91** » Mon Jun 10, 2013 8:32 pm

You will need to run a decent whack of camber, I can't tell you exactly what but it'd be 5 degrees +

That with rolled/flared/pulled guards and a crapload of stretch (probably 215/225's on the 10') and it might fit up ok, and still rub to buggery

by **Caution** » Mon Jun 10, 2013 8:34 pm

Same specs. 225/40's

18x10 +25

18x10 +25

Re: 18x10 +25

Re: 18x10 +25

Re: 18x10 +25

Re: 18x10 +25

Re: 18x10 +25

Re: 18x10 +25

Re: 18x10 +25

Who is online