Australian Liberty Owners Club
Project Veloci
Re: Project Veloci
by tangcla » Sat Apr 20, 2013 6:58 pm
You should have chopped in side skirts!
www.tangcla.com - photography
Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
Canon 5D Mark III x2 | 16-35mm f/2.8L | 24-70mm f/2.8L IS | 70-200mm f/2.8L IS
100mm f/2.8L IS macro | 200mm f/2.0L IS | 580EX-II x2 | 430EX-II | PocketWizard TT1/TT5
-
tangcla - Posts: 7409
- Joined: Wed Aug 15, 2007 1:47 pm
- Location: Melbourne, VIC
- Car: B6 Audi S4 (4.2L V8)
- Real name: Clarence
- Profile URL: http://www.tangcla.com
Re: Project Veloci
by MH3.0R » Sat Apr 20, 2013 7:56 pm
tangcla wrote:You should have chopped in side skirts!
I am not that clever with chopping yet, but I will have a play.
MY15 Jaguar XFR-S 5.0 V8 SC 8AT White Saloon (Stock - nothing more to do with 400+ KW 
)
MY11 Jaguar XFS 3.0DTT 6AT White Saloon (Prepped for sale)
MY19 Subaru XV 2.0iS the shopping trolley and weekend all terrain cruiser!
)MY11 Jaguar XFS 3.0DTT 6AT White Saloon (Prepped for sale)
MY19 Subaru XV 2.0iS the shopping trolley and weekend all terrain cruiser!
-
MH3.0R - -stickered-
- Posts: 2090
- Joined: Sat Apr 12, 2008 9:29 am
- Location: Melbourne, Vic
- Real name: Mark
- Profile URL: viewtopic.php?f=10&t=12969#p176433
Re: Project Veloci
by MH3.0R » Sat Apr 20, 2013 7:57 pm
chaotic2050 wrote:
Agh! Please remove that ugly piece of chopping from my build thread!!!
Ok, but just as long as everyone knows that it will not happen!
MY15 Jaguar XFR-S 5.0 V8 SC 8AT White Saloon (Stock - nothing more to do with 400+ KW )
MY11 Jaguar XFS 3.0DTT 6AT White Saloon (Prepped for sale)
MY19 Subaru XV 2.0iS the shopping trolley and weekend all terrain cruiser!
)MY11 Jaguar XFS 3.0DTT 6AT White Saloon (Prepped for sale)
MY19 Subaru XV 2.0iS the shopping trolley and weekend all terrain cruiser!
-
MH3.0R - -stickered-
- Posts: 2090
- Joined: Sat Apr 12, 2008 9:29 am
- Location: Melbourne, Vic
- Real name: Mark
- Profile URL: viewtopic.php?f=10&t=12969#p176433
-
Kekotic - -stickered-
- Posts: 6452
- Joined: Tue Jun 08, 2010 6:46 pm
- Car: MY07 Liberty GT Spec.B
- Profile URL: viewtopic.php?f=10&t=13066
-
bigBADbenny - Posts: 10465
- Joined: Tue Oct 04, 2011 6:36 pm
- Location: Collingwood, Melbourne
- Car: MY07 GT-B 6MT OBP Wagon
- Real name: Ben Richards
- Profile URL: http://tinyurl.com/agvbzop
Re: Project Veloci
by AB501UT!0N » Sat Apr 20, 2013 11:06 pm
bigBADbenny wrote:Stunning pics!
Agree awesome pics Clarence and Mark I agree keep the wing
jakey wrote:.... goshgollywingwong
Jack_Keaka wrote:the process of chris getting his parts as follows:
-
AB501UT!0N - Posts: 1315
- Joined: Fri Sep 09, 2011 9:58 am
- Location: Kyneton
- Car: Subaru Liberty Heritage 2000
- Real name: Chris
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Project Veloci
by MH3.0R » Fri Apr 26, 2013 6:15 pm
Had a play in the garage today with my spare set of fog surrounds and look what happened!
My requirements for the DRL install are/were:
1. Legal position according to ADR76/00 (which calls up the ECE R87 regulation). Look them up if you don't know (Google is your friend!!!)
2. The install is only to impact the fog surrounds (cheap to replace should I decide I don't like them)
3. No permanent mods to the front bar or any other structure.
So, only did a trial "loose" fit of one side. Also played on photo shop and checked the regulations, then did some measurements. So tried to achieve some symmetry by getting in the lower mid area of the fog surround.
Measurements and cutting took about an hour with a fine tooth single ended hack saw and a very sharp Stanley knife. The material is a rubberised soft plastic, so reasonably easy to cut. Measured twice and cut once, but still each side is slightly different. Took to them with the Dremel afterward to try and even them up, but only made it worse. I figure I will cover the fog surround with the hex plastic mesh, so it will hide most of the imperfections.
So, feel free to comment and provide your opinions, but try not to bruise my feelings too much!
My requirements for the DRL install are/were:
1. Legal position according to ADR76/00 (which calls up the ECE R87 regulation). Look them up if you don't know (Google is your friend!!!)
2. The install is only to impact the fog surrounds (cheap to replace should I decide I don't like them)
3. No permanent mods to the front bar or any other structure.
So, only did a trial "loose" fit of one side. Also played on photo shop and checked the regulations, then did some measurements. So tried to achieve some symmetry by getting in the lower mid area of the fog surround.
Measurements and cutting took about an hour with a fine tooth single ended hack saw and a very sharp Stanley knife. The material is a rubberised soft plastic, so reasonably easy to cut. Measured twice and cut once, but still each side is slightly different. Took to them with the Dremel afterward to try and even them up, but only made it worse. I figure I will cover the fog surround with the hex plastic mesh, so it will hide most of the imperfections.
So, feel free to comment and provide your opinions, but try not to bruise my feelings too much!
MY15 Jaguar XFR-S 5.0 V8 SC 8AT White Saloon (Stock - nothing more to do with 400+ KW )
MY11 Jaguar XFS 3.0DTT 6AT White Saloon (Prepped for sale)
MY19 Subaru XV 2.0iS the shopping trolley and weekend all terrain cruiser!
)MY11 Jaguar XFS 3.0DTT 6AT White Saloon (Prepped for sale)
MY19 Subaru XV 2.0iS the shopping trolley and weekend all terrain cruiser!
-
MH3.0R - -stickered-
- Posts: 2090
- Joined: Sat Apr 12, 2008 9:29 am
- Location: Melbourne, Vic
- Real name: Mark
- Profile URL: viewtopic.php?f=10&t=12969#p176433
Re: Project Veloci
by zch91 » Fri Apr 26, 2013 6:24 pm
Looks pretty cool! Better having them at the bottom as opposed to in the centre as bates had his.
-
zch91 - -stickered-
- Posts: 2665
- Joined: Sat Dec 24, 2011 11:12 am
- Location: Darwin, NT
- Car: MY04 GT Premium - Silver 5EAT
- Real name: Zach
- Profile URL: viewtopic.php?f=10&t=15397
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
-
Kekotic - -stickered-
- Posts: 6452
- Joined: Tue Jun 08, 2010 6:46 pm
- Car: MY07 Liberty GT Spec.B
- Profile URL: viewtopic.php?f=10&t=13066
Re: Project Veloci
by MH3.0R » Fri Apr 26, 2013 8:43 pm
Tried all these with photoshop:
I settled on this last one so I could get some rigidity into the installation site as the lower edge is significantly stronger than the middle bits. Still would have preferred the site just between the lip and bar, but he, its gotta be legal when it will be so visible!
I settled on this last one so I could get some rigidity into the installation site as the lower edge is significantly stronger than the middle bits. Still would have preferred the site just between the lip and bar, but he, its gotta be legal when it will be so visible!
MY15 Jaguar XFR-S 5.0 V8 SC 8AT White Saloon (Stock - nothing more to do with 400+ KW )
MY11 Jaguar XFS 3.0DTT 6AT White Saloon (Prepped for sale)
MY19 Subaru XV 2.0iS the shopping trolley and weekend all terrain cruiser!
)MY11 Jaguar XFS 3.0DTT 6AT White Saloon (Prepped for sale)
MY19 Subaru XV 2.0iS the shopping trolley and weekend all terrain cruiser!
-
MH3.0R - -stickered-
- Posts: 2090
- Joined: Sat Apr 12, 2008 9:29 am
- Location: Melbourne, Vic
- Real name: Mark
- Profile URL: viewtopic.php?f=10&t=12969#p176433
-
Kekotic - -stickered-
- Posts: 6452
- Joined: Tue Jun 08, 2010 6:46 pm
- Car: MY07 Liberty GT Spec.B
- Profile URL: viewtopic.php?f=10&t=13066
Re: Project Veloci
by <GB> » Fri Apr 26, 2013 9:28 pm
Either of the bottom pictures look good in my opinion
- <GB>
- Posts: 2290
- Joined: Tue Nov 22, 2011 9:05 am
- Location: MELBOURNE
- Car: 08 Liberty STI
- Profile URL: viewtopic.php?f=18&t=14660
Re: Project Veloci
by MH3.0R » Fri Apr 26, 2013 9:35 pm
chaotic2050 wrote:Only cause Cruisn said it.
And what would you do if he said "f..k me"???
MY15 Jaguar XFR-S 5.0 V8 SC 8AT White Saloon (Stock - nothing more to do with 400+ KW )
MY11 Jaguar XFS 3.0DTT 6AT White Saloon (Prepped for sale)
MY19 Subaru XV 2.0iS the shopping trolley and weekend all terrain cruiser!
)MY11 Jaguar XFS 3.0DTT 6AT White Saloon (Prepped for sale)
MY19 Subaru XV 2.0iS the shopping trolley and weekend all terrain cruiser!
-
MH3.0R - -stickered-
- Posts: 2090
- Joined: Sat Apr 12, 2008 9:29 am
- Location: Melbourne, Vic
- Real name: Mark
- Profile URL: viewtopic.php?f=10&t=12969#p176433
Who is online
Users browsing this forum: No registered users and 3 guests