Hog-zawst System - Exhaust Mod

Nearly everything is in here to start with.
If it's about your car, or Subaru's in general, put it in "Subaru Chat".

Hog-zawst System - Exhaust Mod

Postby GTSPECB STI » Wed Apr 23, 2008 11:36 am

This is a thread that was started sometime ago on legacygt.com. It made me LOL plenty but after seeing how many Libo/Legacy owners tried this with good results it has made me wonder. I am thinking about doing this on the weekend just for giggles.

Link: http://www.legacygt.com/forums/showthread.php?t=35764

Quote: This is a bolt-on exhaust, keeps stock hanger locations, and even keeps the stock tips! This is what makes it so inexpensive!! Makes it completely stock looking, but unleashes a ton of that boxer rumble at idle, and turns into a tame roar when you floor it. A few backfires and pops always accompany it.

I won't release the price of this yet - i'd like to hear your opinions first. But I'll say one thing...You think cat-backs that cost several hundred were crazy? So did I. This is something that will NOT hurt your wallet!!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~
Edited by request to put all vids in the 1st post:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~

Here is an audio clip of it outside the car: Cheap digicam, so it's alot deeper than it will record - but still provides a decent idea...
http://media.putfile.com/Outside-Exhaust-92


Here is a vid of the inside with door open/closed and RPM's:
http://media.putfile.com/Inside-Exhaust-99


In car, out for a drive:
http://media.putfile.com/Driving-70


Exhaust system revealed:
http://media.putfile.com/Revealed-98

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~
Edited by request to spill the beans:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~

All that was done was to purchase 8 3/8" washers from a hardware store. Remove 2 bolts and nuts from muffler flange, remove gasket, put 2 washers on each bolt inbetween the flanges, and tighten nut back down. This creates a 1/4" gap - and this was all that was done to create your very own hogzaust. Enjoy!!
MY10 Forester XTP
GTSPECB STI
-stickered-
 
Posts: 1836
Joined: Tue Jun 19, 2007 4:26 pm
Location: Perth

Postby SkoobyGT » Wed Apr 23, 2008 11:58 am

I had been looking at this for ages, when a few weeks ago I decided to take 10 minutes out of my day and do it, for shits and giggles.

I started it up and drove it, and although amusing for about 2 minutes, it sounded like shit. Sounds like a tinny dak dak Corolla or the like with an exhaust. Completely takes away from the nice sound of the car.

Doesn't sound TOO bad on the vids, but in real life just sounds gay.

BUT, it is something you are going to have to do just for a laugh to see how loud your car will go because at times it did sound tough on boost.
:lol:
My 2c
************FOR SALE - $20,999 - ************2004 GT Liberty
User avatar
SkoobyGT
 
Posts: 754
Joined: Thu Oct 12, 2006 3:22 pm
Location: Sydney

Postby MY07GT » Wed Apr 23, 2008 6:57 pm

Prob not for the pre-MY07 models either. Equal length headers?

Phil.
[TEAM FUNERAL]
Image
[MY07GT]
club.liberty.asn.au
User avatar
MY07GT
 
Posts: 2189
Joined: Sat Oct 07, 2006 9:29 am
Location: Sydney
Real name: Phil

Postby moggy » Wed Apr 23, 2008 7:01 pm

It's probably illegal anyway. :lol:

8) Bob.
When I give an opinion you have to ask yourself...what the hell does he know about anything!


I started out with nothing....and I've still got most of it left.....

MY07 Liberty GT spec B 6MT Sedan;
P3 Dump|Fujitsubo Legalis R|Whiteline|Enkeis|HKS EVC|Dixcel|Blitz|Greddy|Pink Bits|Brembos|178.6 kw ATW|
User avatar
moggy
 
Posts: 888
Joined: Tue Jul 24, 2007 5:05 pm
Location: NW Sydney, NSW
Car: MY07 Lib GTB 6MT


Return to General Chat

Who is online

Users browsing this forum: No registered users and 5 guests