Jaydece's Major Development Project

[<GB>]

Nice work Justin, are u driving it around?

[Kekotic]

Nice work Justin, are u driving it around?

Chaos theory....




Yes I am implying that Justins car on the dyno today caused that meteorite to strike the earth.

[jaydece]

LOL @ Kieran.......as if!

GB - I dont have the car yet....awaiting new solenoids and running up on the dyno again for some more run in, checking and testing....drive the car for about 500km? from memory....driving in different loads in different gears....will be boost limited....

bring it back to springy.....drain all fluids, filter....check/inspect....then see what she makes on pump fuel...

That's if my problem is fixed!.....big IF...I'm praying...

[Kekotic]

That's if my problem is fixed!.....big IF...I'm praying...

I'm praying to the big noodly appendage in the sky for you.

[bigBADbenny]

Got a log with VVT angles to share with us?

[jaydece]

UPDATE:

I got the car back yesterday afternoon.....and I must say its taking a while getting used to a car you own which you havent driven for almost 8 months.....

So as posted by benny in his AVCS thread my issue was resolved by installing 2 new solenoids.....I quickly logged L and R avcs this morning on my way to work via data scanner and during light acceleration all seems to be good

( sorry Ben no recorded logs )

Springy have run in about 300km both using the dyno and road? so I got to make up another couple hundred kms before she goes back for inspection, drain and final tune...

So in regards to the way it drives? well....all I can say is it sounds and drives different......

My mahle pistons were like a diesel engine...the CP pistons I'm pretty happy with....piston slap is slightly present...but its almost as good as it can get

My jerkiness, hesistation is virtually no more... and no power down low on the rpm is much more smoother as it builds revs....

Power wise I'm still at around 220kw at 15 psi with the run in? I have tried loading her up and trying to get used to boost again....and on my gtboostgauge she's making 3-6psi as early as 2400-2700rpm....

I tried one run where I had 13psi @ 4500-5000rpm and I backed off cause I got scared... power delivery is really great!

As with any build...got some minor things to sort and niggle out but they are no biggie....I'm hearing this actuatating / hissing sound...seems to be coming from my external gate area? when I come off acceleration its making a sound like a squeaky door closing....car is popping and burping on back off sometimes.....not really concerned at this stage as it is a run in tune

got to install back my atmospheric sensor, was removed when the air pump delete was done...SSM is reading boost stupid vs what my gt boostgauge shows....just got to remove the sensor from its housing...which is a bit of a pain...

I'm going back to springy today to pick up some old parts, provide feedback and from there will run the car in....and enjoy her company back

I'll be touch people...

[Boostaddict]

Good feeling to actually drive your own car again!!!

Good luck with this beast.!!

Where are the pics of the completed engine bay??? Can't tease like that!!!

[<GB>]

how many km you gotta do before power tune? and how long till you do one

[jaydece]

how many km you gotta do before power tune? and how long till you do one

I will probably do another 500hm or so and then bring it back...

I'm hoping to cover around that many km's in the next 1-2 weeks if I can...

[senator]

Sweet.

Now stop wasting time on the forums and clock up those km’s

[<GB>]

how many km you gotta do before power tune? and how long till you do one

I will probably do another 500hm or so and then bring it back...

I'm hoping to cover around that many km's in the next 1-2 weeks if I can...

nice lol sooner the better huh! i still havent sent mine back

[jacks-GTB]

such good news justin happy days

[jaydece]

UPDATE:

Cool comments guys! Thanks!

So springy found this squeaky noise.....ended up being my perrin BOV....adjusted the spring tension slightly and noise has stopped.....

If I have time this weekend will install the DAMD steering wheel...

Samco radiator hoses finally arrived ( Thanks brainy ) so will install them when the fluids get drained...

Got to drive my car outside of work km's due to last nights catch up with GB, Bad Benny, Bruce, Gino, Brainy @ STI docklands for a wrx club meet.....interesting night and good quick catchup with the boys....also met some club members and had a good chat....

[jaydece]

SMALL UPDATE:

Car is doing great....clocked up around 500km so far...so another 500km to go...

Also..had some time to carry out the following

[bigBADbenny]

DR L!!!