Member Profile - AB501UT!0N

[AB501UT!0N]

Mitch get the lip for sure, it will set off the front of your red beauty nicely

Not sure if you posted it, but can you please send me the link?

This is the one Mitch - http://www.ultrex.com.au/subaru-wrx-sti-style-front-lip-my06-my07-b4-liberty-p-278.html



And a update on the B4 front cut, the guy was ment to email me pics and nothing, when I call it does to message bank so I have given up on anything happening with this so I'm on the hunt again! Does anyone know if a Gen 4 Liberty 2.5 NA engine would fit in my car and what would I need to change in order to get it to fit?

Thanks guys and has anyone got anything from http://www.justjap.com.au/aboutus.asp before?

[Boostaddict]

Sucks when people don't come thru.

The only experiences I have had with buying motors etc was with ichiban . Great guys and great engine. Gave me the compression across all cylinders and then started the engine and did another compression test infront of me and ended up being a wicked strong engine . It's was a tx3 turbo Mazda GTR motor but same same

[AB501UT!0N]

Sucks when people don't come thru.

The only experiences I have had with buying motors etc was with ichiban . Great guys and great engine. Gave me the compression across all cylinders and then started the engine and did another compression test infront of me and ended up being a wicked strong engine . It's was a tx3 turbo Mazda GTR motor but same same

It sure is a pain and thanks for the info and I have contacted Ichiban asking for some pricing on a B4 front cut so I shall wait and see what they say!

Also I have some more goodness on its way from Japan!

[Jack_Keaka]

It sure is a pain and thanks for the info and I have contacted Ichiban asking for some pricing on a B4 front cut so I shall wait and see what they say!

Ichiban are great and probably the best pricing i have seen. its where i will be getting my front cut from. if you need me to go and check it out before you put money down on it i can. I've been needing an excuse to head over there.

and nice bits you have UEL's?

[AB501UT!0N]

It sure is a pain and thanks for the info and I have contacted Ichiban asking for some pricing on a B4 front cut so I shall wait and see what they say!

Ichiban are great and probably the best pricing i have seen. its where i will be getting my front cut from. if you need me to go and check it out before you put money down on it i can. I've been needing an excuse to head over there.

and nice bits you have UEL's?

Thanks Jack that really nice of you mate! and when I hear back from them I shall let you know, and haha thanks, I cant wait to get the exhaust on! and no I do not I was going to hold off till I get the B4 engine in

[Jack_Keaka]

all good bruv! shoot me a PM when you get more info.

[AB501UT!0N]

New garnish install thanks to Jack and his instructions

[Jack_Keaka]

looks good! it was a piece of cake eh?

[SH30RB]

Looks good Chris, great job

Me personally, Im not a fan of the wood/timber garnish but hey, its what you like that matters

[AB501UT!0N]

looks good! it was a piece of cake eh?

Thanks to your awesome instructions it was so easy!

Looks good Chris, great job

Me personally, Im not a fan of the wood/timber garnish but hey, its what you like that matters

Thanks Simon and me either the wood trim makes it too old manly lol

[toson1911]

Hey man your wheels.. they look awesome where did you get them from? im looking at same wheels for a 2003 rx in silver , i think i want to go black but.

[sbv]

It sure is a pain and thanks for the info and I have contacted Ichiban asking for some pricing on a B4 front cut so I shall wait and see what they say!

Ichiban are great and probably the best pricing i have seen. its where i will be getting my front cut from. if you need me to go and check it out before you put money down on it i can. I've been needing an excuse to head over there.

and nice bits you have UEL's?

+1 for Ichiban

I purchased a GTB half cut from them in December, which is now installed into my Outback (Gen 3). Installation completed last Friday, started first click and perfect Idle.

All in all excellent value for money and service to match!

[AB501UT!0N]

Hey man your wheels.. they look awesome where did you get them from? im looking at same wheels for a 2003 rx in silver , i think i want to go black but.

Thanks mate and I got them from a guy called Gerald from Cheap Wheels Direct and his customer service is awesome! If you want his number send me a PM

It sure is a pain and thanks for the info and I have contacted Ichiban asking for some pricing on a B4 front cut so I shall wait and see what they say!

Ichiban are great and probably the best pricing i have seen. its where i will be getting my front cut from. if you need me to go and check it out before you put money down on it i can. I've been needing an excuse to head over there.

and nice bits you have UEL's?

+1 for Ichiban

I purchased a GTB half cut from them in December, which is now installed into my Outback (Gen 3). Installation completed last Friday, started first click and perfect Idle.

All in all excellent value for money and service to match!

Nice and pics please? and how long did it take to install and how much all up if you don't mind me asking? Thanks

[AB501UT!0N]

I have been quote from Ichiban $2300 for B4 front cut and $5500-$6000 for them to do the conversion and supply all the parts

Only problem is I shall be sleeping in a bush in NSW for a few days lol

[toson1911]

is that in victoria though? and how come you only got 7.5 wide and not 8?