Tru-Fit 3D Mats Gen4,5, BRZ direct from the distributor.

[bigBADbenny]

I missed some notifications, my bad lol

[Jayraddd]

Lol, it's ok Was a nice surprise

[exclusive2u]

Has anyone attempted to replace the 3d badge?

[Jayraddd]

Not yet, but its on my growing to-do list lol

[XP05UR]

Mats arrived Monday, installed yesterday.. Very happy with them overall, just made a slight mod around the drivers footrest when fitting them..

Great group buy

[Digital]

Has anyone attempted to replace the 3d badge?

Yes

Received mine yesterday, whacked them in today. Took the Subaru badges off my genuine carpet mats and replaced the 3D badges.

Crappy quality pics but it was getting dark...

[bigBADbenny]

Mats arrived Monday, installed yesterday.. Very happy with them overall, just made a slight mod around the drivers footrest when fitting them..

Great group buy

Thanks Cobber! Please share your mod too...

[HoFF]

How'd you go getting the 3d badges of mate?

[Digital]

With a screwdriver and pliers and those lil' suckers will pop right off (they look like they were pop riveted I guess so you won't be able to re-use the pins they used to attach)

[HoFF]

With a screwdriver and pliers and those lil' suckers will pop right off (they look like they were pop riveted I guess so you won't be able to re-use the pins they used to attach)

Sweet as. I'll be changing mine this week.

[Jayraddd]

Looks awesome with the Subaru badges D

Anyone else have a tip on how to stop the clutch pedal catching on the mat ??
Stalled reversing out of the yard this morning because of it :/

[bigBADbenny]

It's in the thread!
Cut top of mat a little...
Gaffer thick washer to clutch pedal stem...
DIY clutch stopper...
Whichever takes your fancy, pending further inspection.
Ill link and edit the 1st post.

So the clutch pedal got hung up & suddenly released?

[bigBADbenny]

Added to the op!
I edited the Q&A when the sticking issue first arose

Update/Alert: some purchasers have reported that their clutch pedal is catching or sticking at the top of the 3D mat.
This is easily fixed by trimming the top of the mat or by making a DIY clutch stopper as detailed in this thread.
As with any potential modification you are making with your vehicle, the onus is on you to ensure proper road worthiness before driving!
This alert is not specific to any particular vehicle regardless of model, transmission or condition in relation to the 3D mats.
Please employ your common sense as regards the proper operation of your vehicle before proceeding or seek the advice of a motor industry professional if in any doubt. Cheers BBB

[ferret89]

Has anyone attempted to replace the 3d badge?

Yeah mate its very easy, I drilled the rivets until they became loose then wiggled them off. Drilled new holes to cover the old ones, put the new badges on and then put threaded some small flathead bolts into the back of the badge to hold them on. Seems to have worked well

[Jayraddd]

Might just trim the top off the mat Try my best to keep it tidy. Rather not touch the clutch pedal !

And yea as you push the clutch right in, the bottom of the pedal slips in behind the mat, so when your releasing the clutch it pops out from behind the mat :/
I'd say if the mats were only like 20mm (to be safe) shorter it would be sweet.. or run further up so the pedal will push down onto the mat. Oh well, still looks awesome