Member Profile - Jack_Keaka

[alessandro132]

...otherwise it will be weeks if me rubbing that shit off

I think you're doing it wrong...

or better yet, pay someone to rub it off for you

[Jack_Keaka]

Got myself some genuine subaru clear side repeaters just got to get some chrome bulbs and will tint them slightly.

clear.jpg (182.35 KiB) Viewed 3623 times

[Sh4wry]

Back when i had my gen 3 i did this too made it look sooooo much better than the shitty yellow.

Good shit

[Jack_Keaka]

I've never been particularly bothered by it. i just did it to shut people up

[AB501UT!0N]

I've never been particularly bothered by it. i just did it to shut people up

Nice You should get green indicators! And it looks good mate

[Jack_Keaka]

sup! so a couple things...
anyone know how to change the bulbs in the clear side indicators? i have chrome bulbs but discovered they are a bit different on the inside...
also after a few months with the plasti-dip on the interior dash, its not held up well from the abuse. I'm going to re dip it all and then do a clear matte coat to make it more durable...
excuse the lack of cleanliness, the car has been sitting in the garage for a few weeks.

[AB501UT!0N]

sup! so a couple things...
anyone know how to change the bulbs in the clear side indicators? i have chrome bulbs but discovered they are a bit different on the inside...
also after a few months with the plasti-dip on the interior dash, its not held up well from the abuse. I'm going to re dip it all and then do a clear matte coat to make it more durable...
excuse the lack of cleanliness, the car has been sitting in the garage for a few weeks.

That sucks about the plasti dip and can you get a different dash surround instead?
I got some yesturday from Azzo28 and I have never seen the color before its like a dark gray oyster color
I shall post up pics up so you can see and is it easy to take the indicator covers off?

Thanks

[Jack_Keaka]

Yeah I had that same grayish dash surround for a bit. It's not a problem I just have to redo it. And the great thing about plasti-dip is that it just peels off. That's how it got so bad because I kept picking at it

The indicators are easy to take out, you just pull them off with your hands. They are clipped in like the battery cover on a tv remote.
As for changing the bulb, I'll put up some pics cause it's makes no sense as to how to change the globes...

[AB501UT!0N]

Yeah I had that same grayish dash surround for a bit. It's not a problem I just have to redo it. And the great thing about plasti-dip is that it just peels off. That's how it got so bad because I kept picking at it

The indicators are easy to take out, you just pull them off with your hands. They are clipped in like the battery cover on a tv remote.
As for changing the bulb, I'll put up some pics cause it's makes no sense as to how to change the globes...

Thanks for the info Jack and hahaha I would probably do the same, as soon as it started peeling I would go loco and peel it all off lol

[Jack_Keaka]

no worries chris!

and here are the indicators.
as you can see the orange one has a section in the middle that can twist open to reveal the bulb. the clear one does not, its all solid...
anyone know how to get to the bulb? ill post this up on the Facebook page also.

CS.jpg (176.73 KiB) Viewed 3538 times

[AB501UT!0N]

Any luck getting them out Jack?

And what type of tool did you use to get the wood grain dash bits out?

[Jack_Keaka]

Nah I'll probably just leave it. I'm not baking it open.
What do you mean what tools did I use? Have you taken off the dash before?

[AB501UT!0N]

Nah I'll probably just leave it. I'm not baking it open.
What do you mean what tools did I use? Have you taken off the dash before?

I have never so I'm not sure what's the best place to start, any ideas?

[Jack_Keaka]

Nah I'll probably just leave it. I'm not baking it open.
What do you mean what tools did I use? Have you taken off the dash before?

I have never so I'm not sure what's the best place to start, any ideas?

ill PM you with details later tonight. I've done it many times

[AB501UT!0N]

Nah I'll probably just leave it. I'm not baking it open.
What do you mean what tools did I use? Have you taken off the dash before?

I have never so I'm not sure what's the best place to start, any ideas?

ill PM you with details later tonight. I've done it many times

Thanks Jack your the best