Halo/Angel Eyes

[Eskimo]

Hi I was wondering if anyone knows where to get Halo/Angel eyes for a MY08 Heritage Sedan?
Cheers Eskimo

[sjm69]

Try hks180 ..Leo ... in the for sale commercial vendor
He can hook you up

[Kekotic]

http://retro-solutions.net/product-info ... id550.html
95mm outer diameter for post facelift (MY07-MY09)

[Graphite]

Retrofit source
http://www.theretrofitsource.com/produc ... s_id=14906

Sent from my HTC Desire HD A9191 using Tapatalk 2

[Kekotic]

Hey Graphite you never posted a photo of those LED setups up close when they were off?
I think a lot of people were a bit worried about how the yellow would look when they were not turned on. Got any photos?

[Eskimo]

cheers for you help guys. what are they like to install pretty easy or not so?

[Kekotic]

cheers for you help guys. what are they like to install pretty easy or not so?

Fairly easy yes.

Have to take off the front bar and the headlights of course, but that is a fairly easy job takes maybe 30 mins.

After that just need some clear silicone, soldering iron and depending on how well you want to do it, some rubber grommets to reseal the headlight if you drill a hole underneath to put the ballast wires through.

[Kody.B]

http://retro-solutions.net/product-info.php?CCFL_angel_eyes-pid550.html

95mm outer diameter for post facelift (MY07-MY09)

Is that the same for preFL?

[Kekotic]

http://retro-solutions.net/product-info.php?CCFL_angel_eyes-pid550.html

95mm outer diameter for post facelift (MY07-MY09)

Is that the same for preFL?

No.

I believe it's 110mm but I cannot be sure.
I'm sure Leo will tell us

[hks180]

I'm not sure either.. so i like to keep my mouth shut rather than just go tell people what i think.

the best thing would be measure it yourself and speak to your supplier about sizing, as CCFL and LED could have different width for same diameter and different manufacturer will have different spec on same diameter ring.

Plus how and where you going to mount the ring play different factor as well.

So 110mm will work, 100mm will work too and 95mm will work as well.... But i used 110mm on most of my install.

[rooby]

If anyone is still after these I have a pair of the CCFLs for a post facelift that I am not going to use and will sell. Inverters included.

[cruisn]

Halo's are ghey.....

Hai Keiran.

[Kekotic]

Whatever you say sir!

[Graphite]

http://retro-solutions.net/product-info.php?CCFL_angel_eyes-pid550.html

95mm outer diameter for post facelift (MY07-MY09)

Is that the same for preFL?

This is how the Morimoto xB 100mm ø ones fit over the shoroud...



This is them when off...





Hope this helps...

[Stewie1995]

hks180 can be really helpful with that stuff might want to pop him a PM and he can help you