zch91 wrote:I'd probably reccomend going to Supercheap or similar and getting aerpro harness(s) to plug right in, no cutting or soldering or stuffing around. Literally plug and play.
My 2c

Thats what we are doing. Although we are not getting the ISO to Aftermarket one as the few that I have used in the past have had issues with correct pin match ups etc, and have therefore required soldering anyway.
05GTLIB wrote:Whs, as long as you can use a test light, you can fit a stereo, 3 main wires- constant power, acc, earth., then its just a matter of hooking up the speakers, very easy, dont pay someone to do it
3 main wires yeah, although then you have to figure out which wire is the antenna amp and there is also the matter with the speakers and not knowing correct polarity. Sure, you will know which wires go to which speaker, but if you have your front right and front left out of phase, you will get sound cancellation at certain points and it will sound like crap.
[New: MY11 FPV F6 | Winter White | Pioneer DEX-P99RS | Alpine PDX-F6 | Alpine PDX-M12 | JL Audio 12W7-AE ]
[Old: MY07 2.0R | Urban Grey | 5 MT | 6000k HID | LED | Alpine IVA-W502E | Alpine PDX1.1000 | Alpine PDX4.150 | JL Audio 12W7v3 | Focal KRX2 ]