Member Profile - jacks-GTB....362kw 21psi 2.6L Stroker

[jacks-GTB]

So you obviously found out what the issue was? How long till she is on the road again?

yeah found the issue...hopefully had to wash the car today because mick said it was to dirty.....hahaha

Ive got the same discs

what are the cam specs?

these are the specs -

Intake 272 / 226 @ .050" / Peak Lift 10.5MM / Centerline AVCS
Exhaust 272 / 232 @ .050" / Peak Lift 10.2mm / Centerline 113

http://www.power-division.com/product.p ... 326&page=1

[<GB>]

Nice man

[jacks-GTB]

UPDATE:

So Michael(MSR) fitted the GSC cams, and they're the same...Cannot advance the timing due to the triggers out so I ordered kelford 264's Stage 2. And they were fitted, and guess what...SAME ISSUE....

This time is wasn't as bad, so mick worked his magic and fixed the issues

[SH30RB]

Jackson, i love that 4th image!

But im confused, if you have no engine, how did you move the car to take some photo's?

[jacks-GTB]

Simon thanks...me too

While I was ordering the cams, mick said "run some more km's on the motor so it ran, but timing could not be advanced because of them Triggers. So took some pics

[dr20t]

Well done Jackson

Been eagerly awaiting an update - so tell us - what was the final output and more importantly how does it feel to have dirty undies once you pop the clutch?????

Mick

[jaydece]

Looking sexy there mate

Shame about the cams! Hope all gets sorted ASAP jack? In the meanwhile enjoy the car

[jacks-GTB]

Well done Jackson

Been eagerly awaiting an update - so tell us - what was the final output and more importantly how does it feel to have dirty undies once you pop the clutch?????

Mick

Hahaha....I get final tune tomorrow arvo....not fully finished. I'll post up asap

[jacks-GTB]

Looking sexy there mate

Shame about the cams! Hope all gets sorted ASAP jack? In the meanwhile enjoy the car

thanks justin

Yeah I cannot believe it....I went through 3 sets.....I emailed kelford and they said that it is a world wide problem, and they rectified it. But still sent the left set 9 degrees out.....

its the blanks that were sent to all the cam companies Cosworth, Tomei, GSC, Brian Crower, Kelford

NO GOOD

[jaydece]

Looking sexy there mate

Shame about the cams! Hope all gets sorted ASAP jack? In the meanwhile enjoy the car

thanks justin

Yeah I cannot believe it....I went through 3 sets.....I emailed kelford and they said that it is a world wide problem, and they rectified it. But still sent the left set 9 degrees out.....

its the blanks that were sent to all the cam companies Cosworth, Tomei, GSC, Brian Crower, Kelford

NO GOOD

FARK & OUCH.......not good at all .....

[<GB>]

Pretty shit effort on the Camshafts!

[jacks-GTB]

Hey Guys,

So here the update :

Picked up the beast yesterday arvo from MSR.... CRAZY

The car made 274awkw 22psi 98oct....wow its freaking INSANE, wants to keep pulling & pulling....

I took it for a drive, and I came back GREEN in the face...Then mick took us for a drive(he's got the balls)...hahaha 4WD drifting then felt more sick....

And I stop driving at 3am this morning....haha

We can get some more power, the Water to Air top core was dropping PSI because the core is to small (turbo to BIG)haha....so we are going to fit a bigger one soon rated for more CFM & HP....

So thanks to all

Mick(MSR) BIG THANK YOU - http://www.msengineering.com.au/

[jacks-GTB]

also having 210kw at 4k is lots of fun

[Boostaddict]

Holy fuckoly!!!! 100 kw atw at like 3,100 rpm and in 1,000 rpm you go to 230kw atw... Shit!!

I WANT I WANT I WANT I WANT I WANT I WANT....... 274kw atw ON A 2.0litre!!!

Wounder what a 2.5 litre would do.... Might have to steel some part idea's off you as i want 300kw atw with pump

[<GB>]

Great result!! When are u going to tune on the corn?