viewtopic.php?f=45&t=18467
Shav - I agree, I'm very happy with how it sits front and rear. Wouldn't want to change it at all. The Jspeed bushings have a number of different shims included which allow you to adjust the geometry of the front end somewhat when installing. I have the large shims below the bushings and the thin ones above which is the most 'aggressive' set up you can use with them. I'm not sure exactly how much the camber and toe is changed though. The thread below from Garage 88 (formally 'Phat') will give you everything you need to know about the Jspeeds bushes.
viewtopic.php?f=38&t=5481&hilit=bushes
Turn in and exit out is certainly a little more precise and stable, and body roll is reduced, however I'm sure those aspects would be improved further with sways.
