T.Renshaw34 - Project Liberty - JDM SPEC B FRONT END!

by **dr20t** » Sat Sep 15, 2012 5:33 pm

Ok...

by **t.renshaw34** » Sat Sep 15, 2012 6:07 pm

Ohhhhhh. Wops lol. I thought all turbo EJ's had them???

by **dr20t** » Sat Sep 15, 2012 6:15 pm

Pure jap goodness is not polluted with such atrocities

Those sort of things were left for the lovely bigger brother....

by **kiahatsiu** » Sat Sep 15, 2012 6:17 pm

If it pleases the court I too ordered some TGV deletes, until Mick pointed out the folly of my ways. I got a refund and got me a lap dance. Support the arts people.

by **t.renshaw34** » Sat Sep 15, 2012 6:31 pm

Yeowwww, yeaaaaa, yaaaaa. Yeopie!
Another +1 for preface.

Cheers for the heads up.

by **bigBADbenny** » Sat Sep 15, 2012 11:16 pm

TGV inside :mrgreen:

by **t.renshaw34** » Sun Sep 16, 2012 5:09 pm

Lol Ben

.

Hate waiting for parts

. But I'm up in the gold coast this week so it's not all bad.

by **t.renshaw34** » Tue Sep 25, 2012 11:15 pm

Mini Update: (25-9-12)

New intake is here...

Kstech 73mm (3")...

: IMG_2125.JPG (116.37 KiB) Viewed 5023 times

25mm sway bars are on there way...

: perrin-sway-bar-kit-rear-25mm-psp-sus-203-1113-7249-lrg.jpg (60.25 KiB) Viewed 5023 times

with Kartboy endlinks...

: KB%20front-rear%20endlinks-sedan.jpg (81.54 KiB) Viewed 5023 times

and AVO Rear Mounts...

: 300_bp_stabimount001.jpg (13.7 KiB) Viewed 5023 times

Also have some bad news....

The 850cc injectors are only going to be good for 17psi on E85

.

Going to have to go top feed, new rails, lines and regulator before we can go E85 properly.

by **bigBADbenny** » Tue Sep 25, 2012 11:45 pm

Supporting your fuel system is good news!

What setup are you considering?

by **jacks-GTB** » Wed Sep 26, 2012 12:04 am

nice one taylor

looking good

by **t.renshaw34** » Wed Sep 26, 2012 12:10 am

bigBADbenny wrote:Supporting your fuel system is good news!
What setup are you considering?

Cheers Ben.

I was origionally hoping I could get away with side feed 850cc's and a parallel set up.

I'm back to the drawing board now

.

Mick has been helping me out a lot answering all my lame questions.

by **SegR** » Wed Sep 26, 2012 8:01 am

Taylor why the bloody hell is the underside of your car so damn clean? Are you trying to outdo Mark ?

by **bigBADbenny** » Wed Sep 26, 2012 8:45 am

Unless Taylor has the trick diff cover and lateral links, that would be Perrin's demo car

by **t.renshaw34** » Wed Sep 26, 2012 10:34 am

SegR wrote:Taylor why the bloody hell is the underside of your car so damn clean? Are you trying to outdo Mark ?

That is Perrins demo car.
My Perrin sway bars are on their way.

But don't worry. The underside of my car is almost as clean as that pic.

by **t.renshaw34** » Wed Sep 26, 2012 3:39 pm

also finally got around to trimming my boot liner to allow it to fit around the cusco bling...

: IMG_21282.jpg (179.03 KiB) Viewed 4954 times

T.Renshaw34 - Project Liberty - JDM SPEC B FRONT END!

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Re: T.Renshaw34 - PROJECT K&T - FMIC E85 21psi

Who is online