Member Profile - AB501UT!0N

Show off what mods you've done to your car.

Re: Member Profile - AB501UT!0N

Postby nickknack » Mon Sep 24, 2012 11:03 pm

AB501UT!0N wrote:
nickknack wrote:Mate the RPF1s look awesome! Thinking about a set for my B4 when I need new tyres. What size are yours? 18x8?


Thanks mate and I love them they are awesome and definitely get them and mine are 18x7.5 but I would got 18x8 but you will probably need to roll your guards :D


Yeah I suspected as such, did you touch your guards at all? And what width tyres are on yours?
User avatar
nickknack
 
Posts: 155
Joined: Tue Apr 17, 2012 3:01 pm
Location: Canberra
Car: Black MY02 Liberty B4
Real name: Nick
Profile URL: viewtopic.php?f=7&t=16448

Re: Member Profile - AB501UT!0N

Postby Jack_Keaka » Mon Sep 24, 2012 11:13 pm

not exactly the same wheels but close enough:
3spo.jpg
3spo.jpg (166.72 KiB) Viewed 3499 times
Apparently i've never been on live television before
User avatar
Jack_Keaka
 
Posts: 3348
Joined: Wed Mar 23, 2011 1:39 am
Location: Antarctica
Car: 21 Forester
Real name: Jack
Profile URL: viewtopic.php?f=10&t=18091

Re: Member Profile - AB501UT!0N

Postby AB501UT!0N » Tue Sep 25, 2012 1:46 pm

nickknack wrote:
AB501UT!0N wrote:
nickknack wrote:Mate the RPF1s look awesome! Thinking about a set for my B4 when I need new tyres. What size are yours? 18x8?


Thanks mate and I love them they are awesome and definitely get them and mine are 18x7.5 but I would got 18x8 but you will probably need to roll your guards :D


Yeah I suspected as such, did you touch your guards at all? And what width tyres are on yours?


I did not but if I corner really hard they do touch so I'm going to get mine done :D and tyre width is 215/35 with slight stretch


Jack_Keaka wrote:not exactly the same wheels but close enough:
3spo.jpg


Thanks for the chop Jack and it actually looks kinda better than what I thought lol

Should I get them? = I don't know :P
jakey wrote:.... goshgollywingwong


Jack_Keaka wrote:the process of chris getting his parts as follows: :yahoo: :mrgreen: :? :close_tema: :shock: :( :cry: :angry2: :skull:
User avatar
AB501UT!0N
 
Posts: 1315
Joined: Fri Sep 09, 2011 9:58 am
Location: Kyneton
Car: Subaru Liberty Heritage 2000
Real name: Chris

Re: Member Profile - AB501UT!0N

Postby Nottage969 » Tue Sep 25, 2012 2:06 pm

Sure, they're very "different", but I don't really like them.. Personal preference though.


I could've sworn it was your car and this thread where you had recently tinted your rear taillights? Was it you, I cat fjd the post anywhere :S. Looking at doing mine, not sure what the best option is.. Whether to go for that tint film or not.
MY03 Subaru Liberty RX 2.5L Special Edition 5spd Manual - Silver

Single-tip Junbl Muffler
18x7 Spec B Alloy Wheels
Pioneer Headdeck and 6.5" Splits
User avatar
Nottage969
 
Posts: 556
Joined: Wed Mar 16, 2011 1:02 pm
Location: Gawler, South Australia
Car: Silver MY03 RX Special Ed.
Real name: Michael

Re: Member Profile - AB501UT!0N

Postby kiahatsiu » Tue Sep 25, 2012 2:29 pm

Friends don't let friends buy tri-spokes.
Kinda flush. Fitment is something. ADM as F*ck.
User avatar
kiahatsiu
 
Posts: 1799
Joined: Tue Sep 01, 2009 6:09 pm
Location: Brisbane
Car: Silver 05 GT Wagon
Real name: Ian

Re: Member Profile - AB501UT!0N

Postby Jack_Keaka » Tue Sep 25, 2012 6:10 pm

AB501UT!0N wrote:Thanks for the chop Jack and it actually looks kinda better than what I thought lol

Should I get them? = I don't know :P


no worries. personally i think there are plenty of much better wheels you can buy. but if you want something different go for it.

Nottage969 wrote:I could've sworn it was your car and this thread where you had recently tinted your rear taillights? Was it you, I cat fjd the post anywhere :S. Looking at doing mine, not sure what the best option is.. Whether to go for that tint film or not.


GO JDM!!!
Apparently i've never been on live television before
User avatar
Jack_Keaka
 
Posts: 3348
Joined: Wed Mar 23, 2011 1:39 am
Location: Antarctica
Car: 21 Forester
Real name: Jack
Profile URL: viewtopic.php?f=10&t=18091

Re: Member Profile - AB501UT!0N

Postby Azzo28 » Tue Sep 25, 2012 8:21 pm

I tinted mine recently. Just the 2 outer rear lights to match the JDM garnish. I used the tint spray, if I had to do it again. I'd just buy the whole JDM set including the garnish off import monster or something.
2001 Liberty Heritage. RFRB grill sprayed Matt black, front lip, legacy rear garnish, LED rear number plate lights, lowered on ISC N1 coilovers, Rota Grid 18x8.5 in Matt black, rolled front and rear guards, HID's, tints and clear side indicators.
Azzo28
 
Posts: 206
Joined: Wed Aug 10, 2011 10:08 am
Location: Melbourne, VIC
Car: 2001 Liberty Heritage
Real name: Matt

Re: Member Profile - AB501UT!0N

Postby Jack_Keaka » Tue Sep 25, 2012 8:25 pm

Azzo28 wrote:I tinted mine recently. Just the 2 outer rear lights to match the JDM garnish. I used the tint spray, if I had to do it again. I'd just buy the whole JDM set including the garnish off import monster or something.


or at the least get the tint film, because if you get in trouble or don't like it ect ect, you can at least remove it
Apparently i've never been on live television before
User avatar
Jack_Keaka
 
Posts: 3348
Joined: Wed Mar 23, 2011 1:39 am
Location: Antarctica
Car: 21 Forester
Real name: Jack
Profile URL: viewtopic.php?f=10&t=18091

Re: Member Profile - AB501UT!0N

Postby AB501UT!0N » Thu Sep 27, 2012 1:06 pm

Jack_Keaka wrote:
AB501UT!0N wrote:Thanks for the chop Jack and it actually looks kinda better than what I thought lol

Should I get them? = I don't know :P


no worries. personally i think there are plenty of much better wheels you can buy. but if you want something different go for it.

They sure would be different but I might just go 25mm spacers on my enkei rpf1s :P

Nottage969 wrote:I could've sworn it was your car and this thread where you had recently tinted your rear taillights? Was it you, I cat fjd the post anywhere :S. Looking at doing mine, not sure what the best option is.. Whether to go for that tint film or not.


GO JDM!!!


If you can get the JDM tail lights cheap enough then go for it otherwise I would go the tint and mine arnt tinted just shaded in that picture :)
jakey wrote:.... goshgollywingwong


Jack_Keaka wrote:the process of chris getting his parts as follows: :yahoo: :mrgreen: :? :close_tema: :shock: :( :cry: :angry2: :skull:
User avatar
AB501UT!0N
 
Posts: 1315
Joined: Fri Sep 09, 2011 9:58 am
Location: Kyneton
Car: Subaru Liberty Heritage 2000
Real name: Chris

Re: Member Profile - AB501UT!0N

Postby Nottage969 » Thu Sep 27, 2012 4:42 pm

Azzo28 wrote:I tinted mine recently. Just the 2 outer rear lights to match the JDM garnish. I used the tint spray, if I had to do it again. I'd just buy the whole JDM set including the garnish off import monster or something.


Hmmm...I might have a look around. How much would I be looking at for the whole set though? :shock:

Jack_Keaka wrote:
Azzo28 wrote:I tinted mine recently. Just the 2 outer rear lights to match the JDM garnish. I used the tint spray, if I had to do it again. I'd just buy the whole JDM set including the garnish off import monster or something.


or at the least get the tint film, because if you get in trouble or don't like it ect ect, you can at least remove it


Yeah that was my idea behind just getting the tint...Though i don't know how easily it would just peal off itself in the weather elements, etc. I couldn't see myself not liking it...But you never know. And sometimes SA cops can be utter assholes so not sure what attention it would attract.
MY03 Subaru Liberty RX 2.5L Special Edition 5spd Manual - Silver

Single-tip Junbl Muffler
18x7 Spec B Alloy Wheels
Pioneer Headdeck and 6.5" Splits
User avatar
Nottage969
 
Posts: 556
Joined: Wed Mar 16, 2011 1:02 pm
Location: Gawler, South Australia
Car: Silver MY03 RX Special Ed.
Real name: Michael

Re: Member Profile - AB501UT!0N

Postby Jack_Keaka » Thu Sep 27, 2012 8:54 pm

Nottage969 wrote:Yeah that was my idea behind just getting the tint...Though i don't know how easily it would just peal off itself in the weather elements, etc. I couldn't see myself not liking it...But you never know. And sometimes SA cops can be utter assholes so not sure what attention it would attract.


then get the JDM ones for sure. plus they have purrdy lights in the middle :wink:
Apparently i've never been on live television before
User avatar
Jack_Keaka
 
Posts: 3348
Joined: Wed Mar 23, 2011 1:39 am
Location: Antarctica
Car: 21 Forester
Real name: Jack
Profile URL: viewtopic.php?f=10&t=18091

Re: Member Profile - AB501UT!0N

Postby Nottage969 » Thu Sep 27, 2012 9:44 pm

Jack_Keaka wrote:
Nottage969 wrote:Yeah that was my idea behind just getting the tint...Though i don't know how easily it would just peal off itself in the weather elements, etc. I couldn't see myself not liking it...But you never know. And sometimes SA cops can be utter assholes so not sure what attention it would attract.


then get the JDM ones for sure. plus they have purrdy lights in the middle :wink:


Haha awwwww how puurrddy :air_kiss: I'll keep my eye out then!
MY03 Subaru Liberty RX 2.5L Special Edition 5spd Manual - Silver

Single-tip Junbl Muffler
18x7 Spec B Alloy Wheels
Pioneer Headdeck and 6.5" Splits
User avatar
Nottage969
 
Posts: 556
Joined: Wed Mar 16, 2011 1:02 pm
Location: Gawler, South Australia
Car: Silver MY03 RX Special Ed.
Real name: Michael

Re: Member Profile - AB501UT!0N

Postby AB501UT!0N » Sun Sep 30, 2012 9:48 pm

Nottage969 wrote:
Jack_Keaka wrote:
Nottage969 wrote:Yeah that was my idea behind just getting the tint...Though i don't know how easily it would just peal off itself in the weather elements, etc. I couldn't see myself not liking it...But you never know. And sometimes SA cops can be utter assholes so not sure what attention it would attract.


then get the JDM ones for sure. plus they have purrdy lights in the middle :wink:


Haha awwwww how puurrddy :air_kiss: I'll keep my eye out then!


Haha get a room you two :P

Question should I get 4-6 Pot brakes or a front swaybar and front lip?
jakey wrote:.... goshgollywingwong


Jack_Keaka wrote:the process of chris getting his parts as follows: :yahoo: :mrgreen: :? :close_tema: :shock: :( :cry: :angry2: :skull:
User avatar
AB501UT!0N
 
Posts: 1315
Joined: Fri Sep 09, 2011 9:58 am
Location: Kyneton
Car: Subaru Liberty Heritage 2000
Real name: Chris

Re: Member Profile - AB501UT!0N

Postby SH30RB » Sun Sep 30, 2012 9:51 pm

AB501UT!0N wrote:Question should I get 4-6 Pot brakes or a front swaybar and front lip?

upgrade to B4 brakes like Jack did and get a front lip :wink: 4/6pots on a 2.5ltr NA is a little overkill in my opinion, and a front sway bar will bring back the typical liberty understeer, keep it as a rear sway bar and some LCA bushes :D
TEAM FUNERAL HEARSE!
Only slightly modified, I swear!
User avatar
SH30RB
-stickered-
 
Posts: 4024
Joined: Sun Aug 07, 2011 8:32 pm
Location: Sydney
Car: 05 Liberty 3.0R-B wagon
Real name: Simon
Profile URL: viewtopic.php?f=10&t=14766

Re: Member Profile - AB501UT!0N

Postby AB501UT!0N » Sun Sep 30, 2012 9:59 pm

SH30RB wrote:
AB501UT!0N wrote:Question should I get 4-6 Pot brakes or a front swaybar and front lip?

upgrade to B4 brakes like Jack did and get a front lip :wink: 4/6pots on a 2.5ltr NA is a little overkill in my opinion, and a front sway bar will bring back the typical liberty understeer, keep it as a rear sway bar and some LCA bushes :D


I was thinking that but I need more for how I drive and I want to do track days and last but not least they have to be pretty :D and thanks for all the info and do u know anywhere to get LCA bushes from?
jakey wrote:.... goshgollywingwong


Jack_Keaka wrote:the process of chris getting his parts as follows: :yahoo: :mrgreen: :? :close_tema: :shock: :( :cry: :angry2: :skull:
User avatar
AB501UT!0N
 
Posts: 1315
Joined: Fri Sep 09, 2011 9:58 am
Location: Kyneton
Car: Subaru Liberty Heritage 2000
Real name: Chris

PreviousNext

Return to Post your mods

Who is online

Users browsing this forum: No registered users and 5 guests