[MEL] Spotted?

[Ric]

...
How did you go? Just over the weekend I twigged that you may know a co-worker of my partner, Gavin, he is in the MG club and was there this weekend (Blue VE wagon)

I didn't damage the car, so that's a big plus!
Came second-in-class in the sprint. There's a race prepared MGA that's about 7 seconds quicker than me, so no chance of catching him.
Was Gavin towing a red Midget with the VE? If yes, he packed up early with an oil leak.

[PinkK]

...
How did you go? Just over the weekend I twigged that you may know a co-worker of my partner, Gavin, he is in the MG club and was there this weekend (Blue VE wagon)

I didn't damage the car, so that's a big plus!
Came second-in-class in the sprint. There's a race prepared MGA that's about 7 seconds quicker than me, so no chance of catching him.
Was Gavin towing a red Midget with the VE? If yes, he packed up early with an oil leak.

All I can confirm is that it is red, only seen it once and discussed it at the same time but I will find out. No damage is always good and second is a fantastic result

[KiDo_Tuning]

Very unfortunate to hear that ben's car aka 08 WRX threw a end bearing after the dyno run.....awful thing to go through...

Tune was knock free but looks like the culprit was a common issue and explains the 40kw power loss over what it had on the road to Sunbury.

Ben's car had the CEL knock patch(any knock would flash the CEL) and Ben said it drove fine coming off the dyno, spun the bearing on startup later that afternoon. Culprit appears to be mechanical and is an issue with the 08 2.5L engines for the Forester and WRX that threw big ends... even from the factory!

[brainy]

I was a good little meet on Sat. Good to catch up with everyone. I heard after the day was over that Ben had a problem with his 08 WRX, but I thought I saw him drive off later?

Hey Bryce, it was good to see you again! Love the unique look of your foz but i have to say, there's way too many stickers on the back of that thing. (the new TMIC looks very clean!!!)

I was going to come over and chat to you after your dyno run but you looked a little upset? The number you pulled seemed okay for a foz and no one mentioned that you were having any issues? Anyway, hope all is well.

Brian

[Ric]

...
How did you go? Just over the weekend I twigged that you may know a co-worker of my partner, Gavin, he is in the MG club and was there this weekend (Blue VE wagon)

I didn't damage the car, so that's a big plus!
Came second-in-class in the sprint. There's a race prepared MGA that's about 7 seconds quicker than me, so no chance of catching him.
Was Gavin towing a red Midget with the VE? If yes, he packed up early with an oil leak.

All I can confirm is that it is red, only seen it once and discussed it at the same time but I will find out. No damage is always good and second is a fantastic result

You should be able to spot him in these pics then!

Img_3715a.jpg (141.26 KiB) Viewed 4247 times

Img_3719a.jpg (169.1 KiB) Viewed 4246 times

[PinkK]

Yup thats Gav Thanks for the pics I'll have to show the Mister and Gav when he is over next.

[XT_for_me]

I was a good little meet on Sat. Good to catch up with everyone. I heard after the day was over that Ben had a problem with his 08 WRX, but I thought I saw him drive off later?

Hey Bryce, it was good to see you again! Love the unique look of your foz but i have to say, there's way too many stickers on the back of that thing. (the new TMIC looks very clean!!!)

I was going to come over and chat to you after your dyno run but you looked a little upset? The number you pulled seemed okay for a foz and no one mentioned that you were having any issues? Anyway, hope all is well.

Brian

I wish you had said hello. I wasn't upset but was thinking about a couple of things related to the tune I had flashed just before the dyno run. Catch up next time.

[<GB>]

Ben said it drove fine coming off the dyno, spun the bearing on startup later that afternoon. Culprit appears to be mechanical and is an issue with the 08 2.5L engines for the Forester and WRX that threw big ends... even from the factory!

sounds like it to me, i guess thats the fun and joy of modifications and doing so to stock bottom ends with known issues

[XT_for_me]

Ben said it drove fine coming off the dyno, spun the bearing on startup later that afternoon. Culprit appears to be mechanical and is an issue with the 08 2.5L engines for the Forester and WRX that threw big ends... even from the factory!

sounds like it to me, i guess thats the fun and joy of modifications and doing so to stock bottom ends with known issues

There have been a number of totally stock Forester XT's that have spun a bearing, but they were all MY09 2008 build. (like mine )

[<GB>]

Ben said it drove fine coming off the dyno, spun the bearing on startup later that afternoon. Culprit appears to be mechanical and is an issue with the 08 2.5L engines for the Forester and WRX that threw big ends... even from the factory!

sounds like it to me, i guess thats the fun and joy of modifications and doing so to stock bottom ends with known issues

There have been a number of totally stock Forester XT's that have spun a bearing, but they were all MY09 2008 build. (like mine )

ouch !!! not handy to know

[JSP]

GT's everywhere yesterday in the city, richmond, and up north.. pity im still in the shaggin wagon....

[xyz]

On the way to work at around 8am

[arrow224]

Red sedan on Taylors Lane Rowville this morning 8:20ish, plates of j4dore.

[bosc0]

Red sedan on Taylors Lane Rowville this morning 8:20ish, plates of j4dore.

Thats ma hood right there! You local?

[doppler69]

On the way to work at around 8am

Nice to get a friendly wave on the way to work XYZ, cheers!