door trim removal

by **mattyzero00** » Mon Sep 17, 2012 1:11 pm

I'm sure this question had been answered but can't find it any were ...how do I remove the front and rEar door trims on a liberty gen 4.....pictures would help

by **bates91** » Mon Sep 17, 2012 1:31 pm

http://iagresearch.com.au/index.php?opt ... iew&gid=44

once the three screws are out you just need to pull gently from the bottom and the clips will pop out

by **mattyzero00** » Mon Sep 17, 2012 9:26 pm

Ok I can't find any screws are they behind the handle

by **seanmau5** » Mon Sep 17, 2012 9:32 pm

Get yourself a trim removal kit, the pull handle cover pops off by prying it at the top.. There is another cover in behind the handle you pull to open the door, there is a little notch at the top which you pry out also. Once that's done undo the screws and pull at the trim at the bottom.

Don't forget to disconnect the courtesy light & you'll also need to undo the 4 screws holding in the handle to open the door (if that makes sense).

I have a walkthrough I can email you if need be.

by **mattyzero00** » Mon Sep 17, 2012 10:29 pm

Yeah it kind of makes sense but the walk through would be great thanks

by **seanmau5** » Mon Sep 17, 2012 10:37 pm

mattyzero00 wrote:Yeah it kind of makes sense but the walk through would be great thanks

Click the link posted above ^^^ it's more or less the same as what I've got

by **mattyzero00** » Mon Sep 17, 2012 10:44 pm

Sorry can't see a link on my screen

by **seanmau5** » Mon Sep 17, 2012 10:45 pm

bates91 wrote:.

http://iagresearch.com.au/index.php?opt ... iew&gid=44

by **mattyzero00** » Mon Sep 17, 2012 10:51 pm

Thanks heaps.... :-)

door trim removal

door trim removal

Re: door trim removal

Re: door trim removal

Re: door trim removal

Re: door trim removal

Re: door trim removal

Re: door trim removal

Re: door trim removal

Re: door trim removal

Who is online