Member Profile - Jack_Keaka

[SH30RB]

Ohh so now you're interested in the Spec B rims

I'm telling you, spray 'em charcoal (same as the TBSTi Enkeis) and they will look freaking ace!

do this simon...
alex i was assuming they would come stock colour which is boring. but seeming as they will be a nice colour then i won't say no

well they do need to be repaired for gutterrash and a few slight buckles because of those damn "outta-no-where" pot holes so may aswell get them painted a different colour. i was considering going a gunmetal/charcoal and keeping them at one stage... but nah! i got my rims today and definitely not keeping stock wheels!

[Jack_Keaka]

well they do need to be repaired for gutterrash and a few slight buckles because of those damn "outta-no-where" pot holes so may aswell get them painted a different colour. i was considering going a gunmetal/charcoal and keeping them at one stage... but nah! i got my rims today and definitely not keeping stock wheels!

sounds good!
ill probably keep a set so when i sell the car the old ones can go back on
if i buy yours ill have 3 sets!

[Corsair]

How about these wheels?

Darker though to match the black highlights on your car.

[cruisn]

Im guessing you havent seen the price for these??

Imagine double the STi Enkeis.....

[Corsair]

Im guessing you havent seen the price for these??

You guessed correctly. But if I undertand what you're saying, you're telling me they're a bargain.

[Jack_Keaka]

They are nice wheels, but as mark said they are expensive. I could easily get some BBS' that look really similar for under 2K.

[AB501UT!0N]

They are nice wheels, but as mark said they are expensive. I could easily get some BBS' that look really similar for under 2K.

Please Jack Please, get some Enkei goodness

[Jack_Keaka]

Please Jack Please, get some Enkei goodness

there is just too much goodness to choose from!
if i were to get Enkies id get PF01 or NT03.

look, in jacks dream land id have a black B4 with some Basset 15x9 rolling on some goodyear eagle RS'. Bassets now offer a 5x100 stud pattern.
and they are freakn cheap for steel wheels.

[Jack_Keaka]

Nigel so kindly lent me his go pro. sorry about the music. i didn't really get to give it a good hit in this short vid. there will be a longer version next week apparently. so for those wondering what my POD sounds like:

http://www.youtube.com/watch?v=T1kFfArqkxs&feature=youtu.be

[Jack_Keaka]

todays activities included:
-putting the wing back on as i decided i like it better, however i left the lip on under it and it looks really good.
-replaced old interior boot trim with new undamaged unscratched one. i also cut out a rubber mat to go on top so things (like my sub) don't fly around. it looks quite good.
-new dash - before was a brown wood grain as most gen 3 owners have. now is a slate colour/looking one. looks nicer . i couldn't get pics as it doesn't really show up in the photos.
-replaced old scratched B pillar trim with new.

also i may have new brakes on the way in the form of B4 brakes - includes rotors and callipers. needs pads though. i should hopefully have those on after the track day.

[Azzo28]

I have that slate style dash surround. I was thinking of wrapping it in matt black vinyl or something like that.

[Jack_Keaka]

I have that slate style dash surround. I was thinking of wrapping it in matt black vinyl or something like that.

is your manual or auto?

[Azzo28]

Auto. Whys that?

[Jack_Keaka]

Auto. Whys that?

Damn, well I don't have the bit that goes around the bottom. That is still timber look. Was just thinking if you were vinyl wrapping we could swap but seeming yours in auto, it doesn't matter.

[AB501UT!0N]

Please Jack Please, get some Enkei goodness

there is just too much goodness to choose from!
if i were to get Enkies id get PF01 or NT03.

look, in jacks dream land id have a black B4 with some Basset 15x9 rolling on some goodyear eagle RS'. Bassets now offer a 5x100 stud pattern.
and they are freakn cheap for steel wheels.

Get the Enkei PF01 I know a guy who can get them cheap for you