Member Profile - AB501UT!0N

[Jack_Keaka]

Also got a ezylip and hope to install it during the week

yay you finally got a lip! you won't believe how much a small plastic strip will change the look of the car.

[seanmau5]

Colour coded mesh grill!

[Jack_Keaka]

Colour coded mesh grill!

silver on silver?? absurd!!

[AB501UT!0N]

Colour coded mesh grill!

silver on silver?? absurd!!

Im not a fan at all of colour coded grills IMO so I have to pass on that one but thanks anyway for the suggestion

And I hope the lip does make a difference and once I install it I shall get some pics and what r ur plans with ur car?

[Jack_Keaka]

I've just got my custom number plates, which i want to get some club.liberty.asn plate surrounds for. and my LED taillight project is coming together (just waiting on some flexible circuit board from the US to arrive)
I've put some painted matt black heritage wheels on, i got Legacy metal door sills from japan, got new carpet, leather seats and door trims. POD filter (to be properly installed).
LED's all round

planned:
BC or coil overs

Enkei NT03's (nearly went for the RPF1's ) with some potenzas

and paint the middle bit of the front bumper black and maybe the mirrors.

clear side indicators

footwell lights & door courtesy lights

when i get a couple of those "planned" items i should start my own build thread

[Azzo28]

They're 18x8.5 +44 (may be wrong about offset but I think that's right from memory). Yeah mate wouldn't say no. Only got the coilovers in late last week so I wouldn't mind taking it for a run.

Awesome Matt sound good to me and I shall try and see if I can free up a day on a weekend

and I got some HID's 8,000k which are installed and I love them since I broke two sets of normal globes due to my hard ride lol

Also got a ezylip and hope to install it during the week ]

Sweet as, Im away this weekend, but should be fine for any weekend after that depending on work.

I had HID's but 1 ballast decided to pack it in and I have gone back to stock globes (which I hate) until i get around to replacing it. The only thing is that it isa little difficult to find parker lights to suit HID's for our cars as the parker globes are the bayonette type not the standard wedge type.

Im looking foward to seeing the lip installed.

[AB501UT!0N]

I've just got my custom number plates, which i want to get some club.liberty.asn plate surrounds for. and my LED taillight project is coming together (just waiting on some flexible circuit board from the US to arrive)
I've put some painted matt black heritage wheels on, i got Legacy metal door sills from japan, got new carpet, leather seats and door trims. POD filter (to be properly installed).
LED's all round

planned:
BC or coil overs

Enkei NT03's (nearly went for the RPF1's ) with some potenzas

and paint the middle bit of the front bumper black and maybe the mirrors.

clear side indicators

footwell lights & door courtesy lights

when i get a couple of those "planned" items i should start my own build thread

Thanks for the comments guys

Very Nice Jack , Can u let me know what leds u went for cause I want some too
And I did see ur car photoshoot with the audi's on ur website

And Matt that sounds awesome to me and as soon as I get a free weekend I shall let u know
And shame about ur HID's hopefully you will be able to go back to them soon

[Jack_Keaka]

Very Nice Jack , Can u let me know what leds u went for cause I want some too
And I did see ur car photoshoot with the audi's on ur website

honestly don't even remember what Leds i used. but i bought 2 different colour whites because i wasn't sure which one would match my headlights (neither did ), one looks almost blue! but what i did learn was that with the number plate ones, you must get a LED that has a lens thing over it to act like a normal globe as LEDs are quite directional.

lol that shoot was before i put the LEDS in. i must do another shoot with my new plates
i have a Facebook page now so people can hire me , check it out if you want...

https://www.facebook.com/BlueJamPhotography

[AB501UT!0N]

Very Nice Jack , Can u let me know what leds u went for cause I want some too
And I did see ur car photoshoot with the audi's on ur website

honestly don't even remember what Leds i used. but i bought 2 different colour whites because i wasn't sure which one would match my headlights (neither did ), one looks almost blue! but what i did learn was that with the number plate ones, you must get a LED that has a lens thing over it to act like a normal globe as LEDs are quite directional.

lol that shoot was before i put the LEDS in. i must do another shoot with my new plates
i have a Facebook page now so people can hire me , check it out if you want...

https://www.facebook.com/BlueJamPhotography

Thanks anyways mate and I shall try and work it out lol and yes please pics with ur new plates

And sorry for the delay guys on the non updates I have been sick and busy with work and I have ordered the Enkei Centre Caps which I will get
this week


And I have to do a modification on the front bumper to get the lip on so I shall hopefully do that this week or on the weekend

[AB501UT!0N]

Got my Enkei center caps on let me know what you think?

[Jack_Keaka]

looks better imo. finishes it off

[AB501UT!0N]

looks better imo. finishes it off

Thanks Jack and same here I did not think it would make such a difference but it does and I love it

Now to get that dang lip on and where is ur build thread damn it! I want pics

[Jack_Keaka]

looks better imo. finishes it off

Thanks Jack and same here I did not think it would make such a difference but it does and I love it

Now to get that dang lip on and where is ur build thread damn it! I want pics

yeah i may as well do one now. took the rear wing off last weekend.

but get that lip on man!

[Corsair]

Got my Enkei center caps on let me know what you think?

Big improvement.

[AB501UT!0N]

You better Jack! And it will be interesting to see how it looks without the wing

Got my Enkei center caps on let me know what you think?

Big improvement.

Thanks mate

And hopefully lip on this week and also in about 4 weeks I will get slotted rotors for the rear and also more low!