I like mine too, they go well with my custom Cusco strut brace in the Outback.
Australian Liberty Owners Club
Member Profile - mrgnluke's XT Forester
Re: Member Profile - mrgnluke's XT Forester
by cruisn » Sun May 27, 2012 7:42 pm
Nice one Morgan.
I like mine too, they go well with my custom Cusco strut brace in the Outback.
I like mine too, they go well with my custom Cusco strut brace in the Outback.
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Member Profile - mrgnluke's XT Forester
by mrgnluke » Wed May 30, 2012 10:04 am
Clicked over this morning.
Celebratory CEL for the occasion!
Celebratory CEL for the occasion!
-
mrgnluke - Posts: 225
- Joined: Mon Jul 28, 2008 11:53 pm
- Location: Central Coast NSW
- Car: MY10 GT wagon- VE Calais V Inter
- Real name: Morgan
Re: Member Profile - mrgnluke's XT Forester
by HoFF » Sat Jun 09, 2012 11:02 pm
spotted in Issue3 of MCM magazine.
-
HoFF - -stickered-
- Posts: 1447
- Joined: Sun Sep 05, 2010 11:39 am
- Location: Southern Highlands NSW
- Car: MY06 3RB Liberty Wagon 6MT MY09 Foz
- Real name: Tom
- Profile URL: viewtopic.php?f=10&t=13577&start=255
Member Profile - mrgnluke's XT Forester
by JDGT05 » Sat Jun 09, 2012 11:32 pm
Nice build mate, wanting to go down a very similar past when I get my hands on my forester. Where did you find that boost gauge air vent setup?
Also how much if you don't mind me asking?
Also how much if you don't mind me asking?
Now driving the mighty 86 
-
JDGT05 - Posts: 1206
- Joined: Thu Sep 29, 2011 1:37 pm
- Location: Perth
- Car: STI Spec Forester
- Real name: James
- Profile URL: viewtopic.php?f=10&t=14065
Re: Member Profile - mrgnluke's XT Forester
by mrgnluke » Sat Jun 09, 2012 11:47 pm
Haha yeah I made the cut into the MCM mag
I actually bought the gauge vent off a guy on ozfoz who made it himself afaik. The gauge itself is just a Prospet one off eBay.
I actually bought the gauge vent off a guy on ozfoz who made it himself afaik. The gauge itself is just a Prospet one off eBay.
-
mrgnluke - Posts: 225
- Joined: Mon Jul 28, 2008 11:53 pm
- Location: Central Coast NSW
- Car: MY10 GT wagon- VE Calais V Inter
- Real name: Morgan
Re: Member Profile - mrgnluke's XT Forester
by mrgnluke » Fri Jun 22, 2012 7:41 pm
Little update here. Picked up a GFB stealth BOV, Hitech twin tip muffler and STi splitter off Andre early in the week. BOV was easy to DIY so that's already on. Need to get a shallow-headed bolt though as the trumpet currently doesn't fit!
Muffler is booked to go on, on Monday afternoon so looking forward to that
Finally got around to installing the flash switch plug from Bram. Great product!
Male and female plugs connected
Drilled a subtle hole in the kick panel near the OBDII port
Booya!
Muffler is booked to go on, on Monday afternoon so looking forward to that
Finally got around to installing the flash switch plug from Bram. Great product!
Male and female plugs connected
Drilled a subtle hole in the kick panel near the OBDII port
Booya!
-
mrgnluke - Posts: 225
- Joined: Mon Jul 28, 2008 11:53 pm
- Location: Central Coast NSW
- Car: MY10 GT wagon- VE Calais V Inter
- Real name: Morgan
Re: Member Profile - mrgnluke's XT Forester
by mrgnluke » Wed Jun 27, 2012 9:26 am
New exhaust is on
Replaced the X-Force muffler with a Hitech twin tip muffler.
First impressions? It’s much quieter than the X-Force but also much deeper …and sexier!
Replaced the X-Force muffler with a Hitech twin tip muffler.
First impressions? It’s much quieter than the X-Force but also much deeper …and sexier!
-
mrgnluke - Posts: 225
- Joined: Mon Jul 28, 2008 11:53 pm
- Location: Central Coast NSW
- Car: MY10 GT wagon- VE Calais V Inter
- Real name: Morgan
Re: Member Profile - mrgnluke's XT Forester
by cruisn » Wed Jun 27, 2012 4:49 pm
Nice Morgs.
Considered painting the muffler body black and just keeping the tips polished?
Considered painting the muffler body black and just keeping the tips polished?
-
cruisn - Posts: 6560
- Joined: Tue Nov 03, 2009 8:09 pm
- Location: Melbourne
- Car: MY02 GTB E Tune
- Real name: Mark
Re: Member Profile - mrgnluke's XT Forester
by mrgnluke » Wed Jun 27, 2012 6:59 pm
Yeah might do that. Didn't have time before it wet on the car but might do it one day
-
mrgnluke - Posts: 225
- Joined: Mon Jul 28, 2008 11:53 pm
- Location: Central Coast NSW
- Car: MY10 GT wagon- VE Calais V Inter
- Real name: Morgan
Re: Member Profile - mrgnluke's XT Forester
by bigBADbenny » Thu Jun 28, 2012 9:42 pm
mrgnluke wrote:Finally got around to installing the flash switch plug from Bram. Great product!
Drilled a subtle hole in the kick panel near the OBDII port
What is the flash switch plug? Sounds cool!
-
bigBADbenny - Posts: 10485
- Joined: Tue Oct 04, 2011 6:36 pm
- Location: Collingwood, Melbourne
- Car: MY07 GT-B 6MT OBP Wagon
- Real name: Ben Richards
- Profile URL: http://tinyurl.com/agvbzop
Re: Member Profile - mrgnluke's XT Forester
by bass_straitener » Thu Jun 28, 2012 9:50 pm
bigBADbenny wrote:What is the flash switch plug? Sounds cool!
I'll take a stab at this and say its a more convenient switch when you need to flash your ECU instead of having to stick your head under the dash to clip the two green connectors together.
Not required on our cars Ben.
"If A is a success in life, then A equals x plus y plus z. Work is x; y is play; and z is keeping your mouth shut."
-
bass_straitener - -stickered-
- Posts: 2247
- Joined: Mon Jul 25, 2011 8:31 pm
- Location: Melbourne, Victoria
- Car: MY12 C63
- Real name: Bruce
- Profile URL: viewtopic.php?f=10&t=14781
-
mrgnluke - Posts: 225
- Joined: Mon Jul 28, 2008 11:53 pm
- Location: Central Coast NSW
- Car: MY10 GT wagon- VE Calais V Inter
- Real name: Morgan
Re: Member Profile - mrgnluke's XT Forester
by d-chang » Fri Jun 29, 2012 12:42 pm
Those twin tips look hot!!
Below car has been gone for quite some time now... blew bottom end bearing and dealership screwed me! Now driving 2008 WRX with ~65k kms on the clock. Only has cat back exhaust and tune by KiDo at the moment! More to come... but slowly!
Purchased recently (12/11/2013), already with: Stage 2 Pedders lowered springs, rear Whiteline sway bar, Advan Racing TCII 18x8 wheels, k&N pod filter, custom 3" exhaust system from turbo back with Magnaflow mufflers. ECUTEK tune of some sort (hopefully soon to be fixed)..... now FIXED!! Now KiDo Tuned!
Added: HID kit, EZ lip equivalents to the front and sides, and various LED treatments, oem boot spoiler, [LGT WRC] plates, GFB Respons BOV for extra Pssscchhh! --> Gone... I couldn't afford it's heart transplant... but keep a look out, as it will come back on sale soon!
Purchased recently (12/11/2013), already with: Stage 2 Pedders lowered springs, rear Whiteline sway bar, Advan Racing TCII 18x8 wheels, k&N pod filter, custom 3" exhaust system from turbo back with Magnaflow mufflers. ECUTEK tune of some sort (hopefully soon to be fixed)..... now FIXED!! Now KiDo Tuned!
Added: HID kit, EZ lip equivalents to the front and sides, and various LED treatments, oem boot spoiler, [LGT WRC] plates, GFB Respons BOV for extra Pssscchhh! --> Gone... I couldn't afford it's heart transplant... but keep a look out, as it will come back on sale soon!
-
d-chang - -stickered-
- Posts: 636
- Joined: Tue Feb 21, 2012 6:29 pm
- Location: Perth, Western Australia
- Car: MY05 Liberty GT
- Real name: Daniel
- Profile URL: viewtopic.php?f=7&t=15749
Re: Member Profile - mrgnluke's XT Forester
by mrgnluke » Mon Jul 02, 2012 6:10 pm
Cheers mate!
Had a productive afternoon.
Blacked out the rear face of the muffler.
Set the RSB to it's hardest setting and greased up the mounting bushes as I had some creaking. I think it's stopped a little but after a little drive, it still creaks
Blacked out the front strut brace.
Strut top covers back on. Much better!
...and this is what it looked like before for reference -
Booked the car in for it's 100k km service. She's going in next Tuesday to get some love. Over the last couple of months, I have been accumulating parts and now it's all here, I'm ready to go
I also made a few exhaust videos while I had some time. Will try and upload tonight
Had a productive afternoon.
Blacked out the rear face of the muffler.
Set the RSB to it's hardest setting and greased up the mounting bushes as I had some creaking. I think it's stopped a little but after a little drive, it still creaks
Blacked out the front strut brace.
Strut top covers back on. Much better!
...and this is what it looked like before for reference -
Booked the car in for it's 100k km service. She's going in next Tuesday to get some love. Over the last couple of months, I have been accumulating parts and now it's all here, I'm ready to go
I also made a few exhaust videos while I had some time. Will try and upload tonight
-
mrgnluke - Posts: 225
- Joined: Mon Jul 28, 2008 11:53 pm
- Location: Central Coast NSW
- Car: MY10 GT wagon- VE Calais V Inter
- Real name: Morgan
Re: Member Profile - mrgnluke's XT Forester
by mrgnluke » Mon Jul 02, 2012 7:26 pm
Here's the exhaust vids. Obviously the better your speakers are, the better it will sound!
http://www.youtube.com/watch?v=wxgOcMJn ... e=youtu.be
http://www.youtube.com/watch?v=I7koTwRB ... e=youtu.be
http://www.youtube.com/watch?v=wxgOcMJn ... e=youtu.be
http://www.youtube.com/watch?v=I7koTwRB ... e=youtu.be
-
mrgnluke - Posts: 225
- Joined: Mon Jul 28, 2008 11:53 pm
- Location: Central Coast NSW
- Car: MY10 GT wagon- VE Calais V Inter
- Real name: Morgan
Who is online
Users browsing this forum: No registered users and 76 guests